mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
421 lines
8.5 KiB
421 lines
8.5 KiB
// SPDX-License-Identifier: GPL-2.0 |
|
/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ |
|
|
|
#include "msm8998.dtsi" |
|
#include "pm8998.dtsi" |
|
#include "pmi8998.dtsi" |
|
#include "pm8005.dtsi" |
|
|
|
/ { |
|
aliases { |
|
serial0 = &blsp2_uart1; |
|
serial1 = &blsp1_uart3; |
|
}; |
|
|
|
chosen { |
|
stdout-path = "serial0:115200n8"; |
|
}; |
|
|
|
vph_pwr: vph-pwr-regulator { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vph_pwr"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
}; |
|
}; |
|
|
|
&blsp1_uart3 { |
|
status = "okay"; |
|
|
|
bluetooth { |
|
compatible = "qcom,wcn3990-bt"; |
|
|
|
vddio-supply = <&vreg_s4a_1p8>; |
|
vddxo-supply = <&vreg_l7a_1p8>; |
|
vddrf-supply = <&vreg_l17a_1p3>; |
|
vddch0-supply = <&vreg_l25a_3p3>; |
|
max-speed = <3200000>; |
|
}; |
|
}; |
|
|
|
&blsp2_uart1 { |
|
status = "okay"; |
|
}; |
|
|
|
&etf { |
|
status = "okay"; |
|
}; |
|
|
|
&etm1 { |
|
status = "okay"; |
|
}; |
|
|
|
&etm2 { |
|
status = "okay"; |
|
}; |
|
|
|
&etm3 { |
|
status = "okay"; |
|
}; |
|
|
|
&etm4 { |
|
status = "okay"; |
|
}; |
|
|
|
&etm5 { |
|
status = "okay"; |
|
}; |
|
|
|
&etm6 { |
|
status = "okay"; |
|
}; |
|
|
|
&etm7 { |
|
status = "okay"; |
|
}; |
|
|
|
&etm8 { |
|
status = "okay"; |
|
}; |
|
|
|
&etr { |
|
status = "okay"; |
|
}; |
|
|
|
&funnel1 { |
|
status = "okay"; |
|
}; |
|
|
|
&funnel2 { |
|
status = "okay"; |
|
}; |
|
|
|
&funnel3 { |
|
status = "okay"; |
|
}; |
|
|
|
&funnel4 { |
|
// FIXME: Figure out why clock late_initcall crashes the board with |
|
// this enabled. |
|
// status = "okay"; |
|
}; |
|
|
|
&funnel5 { |
|
// FIXME: Figure out why clock late_initcall crashes the board with |
|
// this enabled. |
|
// status = "okay"; |
|
}; |
|
|
|
&pcie0 { |
|
status = "okay"; |
|
}; |
|
|
|
&pcie_phy { |
|
status = "okay"; |
|
}; |
|
|
|
&pm8005_lsid1 { |
|
pm8005-regulators { |
|
compatible = "qcom,pm8005-regulators"; |
|
|
|
vdd_s1-supply = <&vph_pwr>; |
|
|
|
pm8005_s1: s1 { /* VDD_GFX supply */ |
|
regulator-min-microvolt = <524000>; |
|
regulator-max-microvolt = <1100000>; |
|
regulator-enable-ramp-delay = <500>; |
|
|
|
/* hack until we rig up the gpu consumer */ |
|
regulator-always-on; |
|
}; |
|
}; |
|
}; |
|
|
|
&qusb2phy { |
|
status = "okay"; |
|
|
|
vdda-pll-supply = <&vreg_l12a_1p8>; |
|
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; |
|
}; |
|
|
|
&replicator1 { |
|
status = "okay"; |
|
}; |
|
|
|
&rpm_requests { |
|
pm8998-regulators { |
|
compatible = "qcom,rpm-pm8998-regulators"; |
|
|
|
vdd_s1-supply = <&vph_pwr>; |
|
vdd_s2-supply = <&vph_pwr>; |
|
vdd_s3-supply = <&vph_pwr>; |
|
vdd_s4-supply = <&vph_pwr>; |
|
vdd_s5-supply = <&vph_pwr>; |
|
vdd_s6-supply = <&vph_pwr>; |
|
vdd_s7-supply = <&vph_pwr>; |
|
vdd_s8-supply = <&vph_pwr>; |
|
vdd_s9-supply = <&vph_pwr>; |
|
vdd_s10-supply = <&vph_pwr>; |
|
vdd_s11-supply = <&vph_pwr>; |
|
vdd_s12-supply = <&vph_pwr>; |
|
vdd_s13-supply = <&vph_pwr>; |
|
vdd_l1_l27-supply = <&vreg_s7a_1p025>; |
|
vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; |
|
vdd_l3_l11-supply = <&vreg_s7a_1p025>; |
|
vdd_l4_l5-supply = <&vreg_s7a_1p025>; |
|
vdd_l6-supply = <&vreg_s5a_2p04>; |
|
vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; |
|
vdd_l9-supply = <&vreg_bob>; |
|
vdd_l10_l23_l25-supply = <&vreg_bob>; |
|
vdd_l13_l19_l21-supply = <&vreg_bob>; |
|
vdd_l16_l28-supply = <&vreg_bob>; |
|
vdd_l18_l22-supply = <&vreg_bob>; |
|
vdd_l20_l24-supply = <&vreg_bob>; |
|
vdd_l26-supply = <&vreg_s3a_1p35>; |
|
vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; |
|
|
|
vreg_s3a_1p35: s3 { |
|
regulator-min-microvolt = <1352000>; |
|
regulator-max-microvolt = <1352000>; |
|
}; |
|
vreg_s4a_1p8: s4 { |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
regulator-allow-set-load; |
|
}; |
|
vreg_s5a_2p04: s5 { |
|
regulator-min-microvolt = <1904000>; |
|
regulator-max-microvolt = <2040000>; |
|
}; |
|
vreg_s7a_1p025: s7 { |
|
regulator-min-microvolt = <900000>; |
|
regulator-max-microvolt = <1028000>; |
|
}; |
|
vreg_l1a_0p875: l1 { |
|
regulator-min-microvolt = <880000>; |
|
regulator-max-microvolt = <880000>; |
|
}; |
|
vreg_l2a_1p2: l2 { |
|
regulator-min-microvolt = <1200000>; |
|
regulator-max-microvolt = <1200000>; |
|
}; |
|
vreg_l3a_1p0: l3 { |
|
regulator-min-microvolt = <1000000>; |
|
regulator-max-microvolt = <1000000>; |
|
}; |
|
vreg_l5a_0p8: l5 { |
|
regulator-min-microvolt = <800000>; |
|
regulator-max-microvolt = <800000>; |
|
}; |
|
vreg_l6a_1p8: l6 { |
|
regulator-min-microvolt = <1808000>; |
|
regulator-max-microvolt = <1808000>; |
|
}; |
|
vreg_l7a_1p8: l7 { |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
}; |
|
vreg_l8a_1p2: l8 { |
|
regulator-min-microvolt = <1200000>; |
|
regulator-max-microvolt = <1200000>; |
|
}; |
|
vreg_l9a_1p8: l9 { |
|
regulator-min-microvolt = <1808000>; |
|
regulator-max-microvolt = <2960000>; |
|
}; |
|
vreg_l10a_1p8: l10 { |
|
regulator-min-microvolt = <1808000>; |
|
regulator-max-microvolt = <2960000>; |
|
}; |
|
vreg_l11a_1p0: l11 { |
|
regulator-min-microvolt = <1000000>; |
|
regulator-max-microvolt = <1000000>; |
|
}; |
|
vreg_l12a_1p8: l12 { |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
}; |
|
vreg_l13a_2p95: l13 { |
|
regulator-min-microvolt = <1808000>; |
|
regulator-max-microvolt = <2960000>; |
|
}; |
|
vreg_l14a_1p88: l14 { |
|
regulator-min-microvolt = <1880000>; |
|
regulator-max-microvolt = <1880000>; |
|
}; |
|
vreg_l15a_1p8: l15 { |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
}; |
|
vreg_l16a_2p7: l16 { |
|
regulator-min-microvolt = <2704000>; |
|
regulator-max-microvolt = <2704000>; |
|
}; |
|
vreg_l17a_1p3: l17 { |
|
regulator-min-microvolt = <1304000>; |
|
regulator-max-microvolt = <1304000>; |
|
}; |
|
vreg_l18a_2p7: l18 { |
|
regulator-min-microvolt = <2704000>; |
|
regulator-max-microvolt = <2704000>; |
|
}; |
|
vreg_l19a_3p0: l19 { |
|
regulator-min-microvolt = <3008000>; |
|
regulator-max-microvolt = <3008000>; |
|
}; |
|
vreg_l20a_2p95: l20 { |
|
regulator-min-microvolt = <2960000>; |
|
regulator-max-microvolt = <2960000>; |
|
regulator-allow-set-load; |
|
}; |
|
vreg_l21a_2p95: l21 { |
|
regulator-min-microvolt = <2960000>; |
|
regulator-max-microvolt = <2960000>; |
|
regulator-allow-set-load; |
|
regulator-system-load = <800000>; |
|
}; |
|
vreg_l22a_2p85: l22 { |
|
regulator-min-microvolt = <2864000>; |
|
regulator-max-microvolt = <2864000>; |
|
}; |
|
vreg_l23a_3p3: l23 { |
|
regulator-min-microvolt = <3312000>; |
|
regulator-max-microvolt = <3312000>; |
|
}; |
|
vreg_l24a_3p075: l24 { |
|
regulator-min-microvolt = <3088000>; |
|
regulator-max-microvolt = <3088000>; |
|
}; |
|
vreg_l25a_3p3: l25 { |
|
regulator-min-microvolt = <3104000>; |
|
regulator-max-microvolt = <3312000>; |
|
}; |
|
vreg_l26a_1p2: l26 { |
|
regulator-min-microvolt = <1200000>; |
|
regulator-max-microvolt = <1200000>; |
|
regulator-allow-set-load; |
|
}; |
|
vreg_l28_3p0: l28 { |
|
regulator-min-microvolt = <3008000>; |
|
regulator-max-microvolt = <3008000>; |
|
}; |
|
|
|
vreg_lvs1a_1p8: lvs1 { |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
}; |
|
|
|
vreg_lvs2a_1p8: lvs2 { |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
}; |
|
|
|
}; |
|
|
|
pmi8998-regulators { |
|
compatible = "qcom,rpm-pmi8998-regulators"; |
|
|
|
vdd_bob-supply = <&vph_pwr>; |
|
|
|
vreg_bob: bob { |
|
regulator-min-microvolt = <3312000>; |
|
regulator-max-microvolt = <3600000>; |
|
}; |
|
}; |
|
}; |
|
|
|
&remoteproc_adsp { |
|
status = "okay"; |
|
}; |
|
|
|
&remoteproc_slpi { |
|
status = "okay"; |
|
}; |
|
|
|
&tlmm { |
|
gpio-reserved-ranges = <0 4>, <81 4>; |
|
}; |
|
|
|
&sdhc2 { |
|
status = "okay"; |
|
cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; |
|
|
|
vmmc-supply = <&vreg_l21a_2p95>; |
|
vqmmc-supply = <&vreg_l13a_2p95>; |
|
|
|
pinctrl-names = "default", "sleep"; |
|
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; |
|
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; |
|
}; |
|
|
|
&stm { |
|
status = "okay"; |
|
}; |
|
|
|
&ufshc { |
|
status = "okay"; |
|
vcc-supply = <&vreg_l20a_2p95>; |
|
vccq-supply = <&vreg_l26a_1p2>; |
|
vccq2-supply = <&vreg_s4a_1p8>; |
|
vcc-max-microamp = <750000>; |
|
vccq-max-microamp = <560000>; |
|
vccq2-max-microamp = <750000>; |
|
}; |
|
|
|
&ufsphy { |
|
status = "okay"; |
|
vdda-phy-supply = <&vreg_l1a_0p875>; |
|
vdda-pll-supply = <&vreg_l2a_1p2>; |
|
vddp-ref-clk-supply = <&vreg_l26a_1p2>; |
|
vdda-phy-max-microamp = <51400>; |
|
vdda-pll-max-microamp = <14600>; |
|
vddp-ref-clk-max-microamp = <100>; |
|
vddp-ref-clk-always-on; |
|
}; |
|
|
|
&usb3 { |
|
status = "okay"; |
|
}; |
|
|
|
&usb3_dwc3 { |
|
dr_mode = "host"; /* Force to host until we have Type-C hooked up */ |
|
}; |
|
|
|
&usb3phy { |
|
status = "okay"; |
|
|
|
vdda-phy-supply = <&vreg_l1a_0p875>; |
|
vdda-pll-supply = <&vreg_l2a_1p2>; |
|
}; |
|
|
|
&wifi { |
|
status = "okay"; |
|
|
|
vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; |
|
vdd-1.8-xo-supply = <&vreg_l7a_1p8>; |
|
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; |
|
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; |
|
}; |
|
|
|
/* PINCTRL - board-specific pinctrl */ |
|
&blsp1_uart3_on { |
|
rx { |
|
/delete-property/ bias-disable; |
|
/* |
|
* Configure a pull-up on 45 (RX). This is needed to |
|
* avoid garbage data when the TX pin of the Bluetooth |
|
* module is in tri-state (module powered off or not |
|
* driving the signal yet). |
|
*/ |
|
bias-pull-up; |
|
}; |
|
|
|
cts { |
|
/delete-property/ bias-disable; |
|
/* |
|
* Configure a pull-down on 47 (CTS) to match the pull |
|
* of the Bluetooth module. |
|
*/ |
|
bias-pull-down; |
|
}; |
|
};
|
|
|