mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
58 lines
1.8 KiB
58 lines
1.8 KiB
* NXP SPI Flash Interface (SPIFI) |
|
|
|
NXP SPIFI is a specialized SPI interface for serial Flash devices. |
|
It supports one Flash device with 1-, 2- and 4-bits width in SPI |
|
mode 0 or 3. The controller operates in either command or memory |
|
mode. In memory mode the Flash is accessible from the CPU as |
|
normal memory. |
|
|
|
Required properties: |
|
- compatible : Should be "nxp,lpc1773-spifi" |
|
- reg : the first contains the register location and length, |
|
the second contains the memory mapping address and length |
|
- reg-names: Should contain the reg names "spifi" and "flash" |
|
- interrupts : Should contain the interrupt for the device |
|
- clocks : The clocks needed by the SPIFI controller |
|
- clock-names : Should contain the clock names "spifi" and "reg" |
|
|
|
Optional properties: |
|
- resets : phandle + reset specifier |
|
|
|
The SPI Flash must be a child of the SPIFI node and must have a |
|
compatible property as specified in bindings/mtd/jedec,spi-nor.txt |
|
|
|
Optionally it can also contain the following properties. |
|
- spi-cpol : Controller only supports mode 0 and 3 so either |
|
both spi-cpol and spi-cpha should be present or |
|
none of them |
|
- spi-cpha : See above |
|
- spi-rx-bus-width : Used to select how many pins that are used |
|
for input on the controller |
|
|
|
See bindings/spi/spi-bus.txt for more information. |
|
|
|
Example: |
|
spifi: spifi@40003000 { |
|
compatible = "nxp,lpc1773-spifi"; |
|
reg = <0x40003000 0x1000>, <0x14000000 0x4000000>; |
|
reg-names = "spifi", "flash"; |
|
interrupts = <30>; |
|
clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>; |
|
clock-names = "spifi", "reg"; |
|
resets = <&rgu 53>; |
|
|
|
flash@0 { |
|
compatible = "jedec,spi-nor"; |
|
spi-cpol; |
|
spi-cpha; |
|
spi-rx-bus-width = <4>; |
|
#address-cells = <1>; |
|
#size-cells = <1>; |
|
|
|
partition@0 { |
|
label = "data"; |
|
reg = <0 0x200000>; |
|
}; |
|
}; |
|
}; |
|
|
|
|