mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
36 lines
980 B
36 lines
980 B
PXA LCD Controller |
|
------------------ |
|
|
|
Required properties: |
|
- compatible : one of these |
|
"marvell,pxa2xx-lcdc", |
|
"marvell,pxa270-lcdc", |
|
"marvell,pxa300-lcdc" |
|
- reg : should contain 1 register range (address and length). |
|
- interrupts : framebuffer controller interrupt. |
|
- clocks: phandle to input clocks |
|
|
|
Optional properties: |
|
- lcd-supply: A phandle to a power regulator that controls the LCD voltage. |
|
|
|
Required nodes: |
|
- port: connection to the LCD panel (see video-interfaces.txt) |
|
This node must have its properties bus-width and remote-endpoint set. |
|
If the panel is not a TFT color panel, then a "lcd-type" property in |
|
the panel should specify the panel type. |
|
This panel node should be in the board dts. |
|
|
|
Example: |
|
lcd-controller@40500000 { |
|
compatible = "marvell,pxa2xx-lcdc"; |
|
reg = <0x44000000 0x10000>; |
|
interrupts = <17>; |
|
clocks = <&clks CLK_LCD>; |
|
|
|
port { |
|
lcdc_out: endpoint { |
|
remote-endpoint = <&panel_in>; |
|
bus-width = <16>; |
|
}; |
|
}; |
|
};
|
|
|