mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
53 lines
1.6 KiB
53 lines
1.6 KiB
* Amlogic GXBB Clock and Reset Unit |
|
|
|
The Amlogic GXBB clock controller generates and supplies clock to various |
|
controllers within the SoC. |
|
|
|
Required Properties: |
|
|
|
- compatible: should be: |
|
"amlogic,gxbb-clkc" for GXBB SoC, |
|
"amlogic,gxl-clkc" for GXL and GXM SoC, |
|
"amlogic,axg-clkc" for AXG SoC. |
|
"amlogic,g12a-clkc" for G12A SoC. |
|
"amlogic,g12b-clkc" for G12B SoC. |
|
"amlogic,sm1-clkc" for SM1 SoC. |
|
- clocks : list of clock phandle, one for each entry clock-names. |
|
- clock-names : should contain the following: |
|
* "xtal": the platform xtal |
|
|
|
- #clock-cells: should be 1. |
|
|
|
Each clock is assigned an identifier and client nodes can use this identifier |
|
to specify the clock which they consume. All available clocks are defined as |
|
preprocessor macros in the dt-bindings/clock/gxbb-clkc.h header and can be |
|
used in device tree sources. |
|
|
|
Parent node should have the following properties : |
|
- compatible: "syscon", "simple-mfd, and "amlogic,meson-gx-hhi-sysctrl" or |
|
"amlogic,meson-axg-hhi-sysctrl" |
|
- reg: base address and size of the HHI system control register space. |
|
|
|
Example: Clock controller node: |
|
|
|
sysctrl: system-controller@0 { |
|
compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd"; |
|
reg = <0 0 0 0x400>; |
|
|
|
clkc: clock-controller { |
|
#clock-cells = <1>; |
|
compatible = "amlogic,gxbb-clkc"; |
|
clocks = <&xtal>; |
|
clock-names = "xtal"; |
|
}; |
|
}; |
|
|
|
Example: UART controller node that consumes the clock generated by the clock |
|
controller: |
|
|
|
uart_AO: serial@c81004c0 { |
|
compatible = "amlogic,meson-uart"; |
|
reg = <0xc81004c0 0x14>; |
|
interrupts = <0 90 1>; |
|
clocks = <&clkc CLKID_CLK81>; |
|
};
|
|
|