mirror of
https://github.com/Qortal/Brooklyn.git
synced 2025-02-12 02:05:54 +00:00
43 lines
1.5 KiB
C
43 lines
1.5 KiB
C
#define BOARD_NAME "Maple Mini"
|
|
#define BOARD_ID 0x7a445272
|
|
|
|
#define MCU_STM32F1 1
|
|
#define STM32F10X_MD /* Medium-density device */
|
|
|
|
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
|
|
#define STM32_PLLMUL_VALUE 9
|
|
#define STM32_HSECLK 8000000
|
|
|
|
#define GPIO_LED_BASE GPIOB_BASE
|
|
#define GPIO_LED_SET_TO_EMIT 1
|
|
#define GPIO_USB_BASE GPIOB_BASE
|
|
#define GPIO_USB_CLEAR_TO_ENABLE 9
|
|
#define GPIO_OTHER_BASE GPIOA_BASE
|
|
|
|
/*
|
|
* Port A setup.
|
|
* PA0 - input with pull-up. AN0
|
|
* PA1 - input with pull-up. AN1
|
|
* PA11 - Push Pull output 10MHz 0 default (until USB enabled) (USBDM)
|
|
* PA12 - Push Pull output 10MHz 0 default (until USB enabled) (USBDP)
|
|
* ------------------------ Default
|
|
* PAx - input with pull-up
|
|
*/
|
|
#define VAL_GPIO_OTHER_ODR 0xFFFFE7FF
|
|
#define VAL_GPIO_OTHER_CRL 0x88888888 /* PA7...PA0 */
|
|
#define VAL_GPIO_OTHER_CRH 0x88811888 /* PA15...PA8 */
|
|
|
|
/*
|
|
* Port B setup.
|
|
* PB1 - Push pull output 50MHz (LED 1:ON 0:OFF)
|
|
* PB9 - Push pull output 50MHz (USB 1:ON 0:OFF)
|
|
* ------------------------ Default
|
|
* PBx - input with pull-up
|
|
*/
|
|
#define VAL_GPIO_LED_ODR 0xFFFFFFFF
|
|
#define VAL_GPIO_LED_CRL 0x88888838 /* PB7...PB0 */
|
|
#define VAL_GPIO_LED_CRH 0x88888838 /* PB15...PB8 */
|
|
|
|
#define RCC_ENR_IOP_EN (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN)
|
|
#define RCC_RSTR_IOP_RST (RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPBRST)
|