mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
105 lines
4.4 KiB
105 lines
4.4 KiB
What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/speed |
|
Date: April 2010 |
|
KernelVersion: 2.6.35 |
|
Contact: [email protected] |
|
Description: |
|
The /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/speed file |
|
controls reporting speed of Wacom bluetooth tablet. Reading |
|
from this file returns 1 if tablet reports in high speed mode |
|
or 0 otherwise. Writing to this file one of these values |
|
switches reporting speed. |
|
|
|
What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/led |
|
Date: August 2014 |
|
Contact: [email protected] |
|
Description: |
|
Attribute group for control of the status LEDs and the OLEDs. |
|
This attribute group is only available for Intuos 4 M, L, |
|
and XL (with LEDs and OLEDs), Intuos 4 WL, Intuos 5 (LEDs only), |
|
Intuos Pro (LEDs only) and Cintiq 21UX2 and Cintiq 24HD |
|
(LEDs only). Therefore its presence implicitly signifies the |
|
presence of said LEDs and OLEDs on the tablet device. |
|
|
|
What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status0_luminance |
|
Date: August 2014 |
|
Contact: [email protected] |
|
Description: |
|
<obsoleted by the LED class API now exported by the driver> |
|
Writing to this file sets the status LED luminance (1..127) |
|
when the stylus does not touch the tablet surface, and no |
|
button is pressed on the stylus. This luminance level is |
|
normally lower than the level when a button is pressed. |
|
|
|
What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status1_luminance |
|
Date: August 2014 |
|
Contact: [email protected] |
|
Description: |
|
<obsoleted by the LED class API now exported by the driver> |
|
Writing to this file sets the status LED luminance (1..127) |
|
when the stylus touches the tablet surface, or any button is |
|
pressed on the stylus. |
|
|
|
What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status_led0_select |
|
Date: August 2014 |
|
Contact: [email protected] |
|
Description: |
|
<obsoleted by the LED class API now exported by the driver> |
|
Writing to this file sets which one of the four (for Intuos 4 |
|
and Intuos 5) or of the right four (for Cintiq 21UX2 and Cintiq |
|
24HD) status LEDs is active (0..3). The other three LEDs on the |
|
same side are always inactive. |
|
|
|
What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status_led1_select |
|
Date: August 2014 |
|
Contact: [email protected] |
|
Description: |
|
<obsoleted by the LED class API now exported by the driver> |
|
Writing to this file sets which one of the left four (for Cintiq 21UX2 |
|
and Cintiq 24HD) status LEDs is active (0..3). The other three LEDs on |
|
the left are always inactive. |
|
|
|
What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/buttons_luminance |
|
Date: August 2014 |
|
Contact: [email protected] |
|
Description: |
|
Writing to this file sets the overall luminance level (0..15) |
|
of all eight button OLED displays. |
|
|
|
What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/button<n>_rawimg |
|
Date: August 2014 |
|
Contact: [email protected] |
|
Description: |
|
When writing a 1024 byte raw image in Wacom Intuos 4 |
|
interleaving format to the file, the image shows up on Button N |
|
of the device. The image is a 64x32 pixel 4-bit gray image. The |
|
1024 byte binary is split up into 16x 64 byte chunks. Each 64 |
|
byte chunk encodes the image data for two consecutive lines on |
|
the display. The low nibble of each byte contains the first |
|
line, and the high nibble contains the second line. |
|
When the Wacom Intuos 4 is connected over Bluetooth, the |
|
image has to contain 256 bytes (64x32 px 1 bit colour). |
|
The format is also scrambled, like in the USB mode, and it can |
|
be summarized by converting:: |
|
|
|
76543210 into GECA6420. |
|
HGFEDCBA HFDB7531 |
|
|
|
What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/unpair_remote |
|
Date: July 2015 |
|
Contact: [email protected] |
|
Description: |
|
Writing the character sequence '*' followed by a newline to |
|
this file will delete all of the current pairings on the |
|
device. Other character sequences are reserved. This file is |
|
write only. |
|
|
|
What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/<serial_number>/remote_mode |
|
Date: July 2015 |
|
Contact: [email protected] |
|
Description: |
|
<obsoleted by the LED class API now exported by the driver> |
|
Reading from this file reports the mode status of the |
|
remote as indicated by the LED lights on the device. If no |
|
reports have been received from the paired device, reading |
|
from this file will report '-1'. The mode is read-only |
|
and cannot be set through the driver.
|
|
|