mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
330 lines
9.5 KiB
330 lines
9.5 KiB
// SPDX-License-Identifier: GPL-2.0+ |
|
// |
|
// mpq7920.c - regulator driver for mps mpq7920 |
|
// |
|
// Copyright 2019 Monolithic Power Systems, Inc |
|
// |
|
// Author: Saravanan Sekar <[email protected]> |
|
|
|
#include <linux/kernel.h> |
|
#include <linux/module.h> |
|
#include <linux/init.h> |
|
#include <linux/err.h> |
|
#include <linux/of.h> |
|
#include <linux/of_device.h> |
|
#include <linux/platform_device.h> |
|
#include <linux/regulator/driver.h> |
|
#include <linux/regulator/of_regulator.h> |
|
#include <linux/i2c.h> |
|
#include <linux/regmap.h> |
|
#include "mpq7920.h" |
|
|
|
#define MPQ7920_BUCK_VOLT_RANGE \ |
|
((MPQ7920_VOLT_MAX - MPQ7920_BUCK_VOLT_MIN)/MPQ7920_VOLT_STEP + 1) |
|
#define MPQ7920_LDO_VOLT_RANGE \ |
|
((MPQ7920_VOLT_MAX - MPQ7920_LDO_VOLT_MIN)/MPQ7920_VOLT_STEP + 1) |
|
|
|
#define MPQ7920BUCK(_name, _id, _ilim) \ |
|
[MPQ7920_BUCK ## _id] = { \ |
|
.id = MPQ7920_BUCK ## _id, \ |
|
.name = _name, \ |
|
.of_match = _name, \ |
|
.regulators_node = "regulators", \ |
|
.of_parse_cb = mpq7920_parse_cb, \ |
|
.ops = &mpq7920_buck_ops, \ |
|
.min_uV = MPQ7920_BUCK_VOLT_MIN, \ |
|
.uV_step = MPQ7920_VOLT_STEP, \ |
|
.n_voltages = MPQ7920_BUCK_VOLT_RANGE, \ |
|
.curr_table = _ilim, \ |
|
.n_current_limits = ARRAY_SIZE(_ilim), \ |
|
.csel_reg = MPQ7920_BUCK ##_id## _REG_C, \ |
|
.csel_mask = MPQ7920_MASK_BUCK_ILIM, \ |
|
.enable_reg = MPQ7920_REG_REGULATOR_EN, \ |
|
.enable_mask = BIT(MPQ7920_REGULATOR_EN_OFFSET - \ |
|
MPQ7920_BUCK ## _id), \ |
|
.vsel_reg = MPQ7920_BUCK ##_id## _REG_A, \ |
|
.vsel_mask = MPQ7920_MASK_VREF, \ |
|
.active_discharge_on = MPQ7920_DISCHARGE_ON, \ |
|
.active_discharge_reg = MPQ7920_BUCK ##_id## _REG_B, \ |
|
.active_discharge_mask = MPQ7920_MASK_DISCHARGE, \ |
|
.soft_start_reg = MPQ7920_BUCK ##_id## _REG_C, \ |
|
.soft_start_mask = MPQ7920_MASK_SOFTSTART, \ |
|
.owner = THIS_MODULE, \ |
|
} |
|
|
|
#define MPQ7920LDO(_name, _id, _ops, _ilim, _ilim_sz, _creg, _cmask) \ |
|
[MPQ7920_LDO ## _id] = { \ |
|
.id = MPQ7920_LDO ## _id, \ |
|
.name = _name, \ |
|
.of_match = _name, \ |
|
.regulators_node = "regulators", \ |
|
.ops = _ops, \ |
|
.min_uV = MPQ7920_LDO_VOLT_MIN, \ |
|
.uV_step = MPQ7920_VOLT_STEP, \ |
|
.n_voltages = MPQ7920_LDO_VOLT_RANGE, \ |
|
.vsel_reg = MPQ7920_LDO ##_id## _REG_A, \ |
|
.vsel_mask = MPQ7920_MASK_VREF, \ |
|
.curr_table = _ilim, \ |
|
.n_current_limits = _ilim_sz, \ |
|
.csel_reg = _creg, \ |
|
.csel_mask = _cmask, \ |
|
.enable_reg = (_id == 1) ? 0 : MPQ7920_REG_REGULATOR_EN,\ |
|
.enable_mask = BIT(MPQ7920_REGULATOR_EN_OFFSET - \ |
|
MPQ7920_LDO ##_id + 1), \ |
|
.active_discharge_on = MPQ7920_DISCHARGE_ON, \ |
|
.active_discharge_mask = MPQ7920_MASK_DISCHARGE, \ |
|
.active_discharge_reg = MPQ7920_LDO ##_id## _REG_B, \ |
|
.type = REGULATOR_VOLTAGE, \ |
|
.owner = THIS_MODULE, \ |
|
} |
|
|
|
enum mpq7920_regulators { |
|
MPQ7920_BUCK1, |
|
MPQ7920_BUCK2, |
|
MPQ7920_BUCK3, |
|
MPQ7920_BUCK4, |
|
MPQ7920_LDO1, /* LDORTC */ |
|
MPQ7920_LDO2, |
|
MPQ7920_LDO3, |
|
MPQ7920_LDO4, |
|
MPQ7920_LDO5, |
|
MPQ7920_MAX_REGULATORS, |
|
}; |
|
|
|
struct mpq7920_regulator_info { |
|
struct regmap *regmap; |
|
struct regulator_desc *rdesc; |
|
}; |
|
|
|
static const struct regmap_config mpq7920_regmap_config = { |
|
.reg_bits = 8, |
|
.val_bits = 8, |
|
.max_register = 0x25, |
|
}; |
|
|
|
/* Current limits array (in uA) |
|
* ILIM1 & ILIM3 |
|
*/ |
|
static const unsigned int mpq7920_I_limits1[] = { |
|
4600000, 6600000, 7600000, 9300000 |
|
}; |
|
|
|
/* ILIM2 & ILIM4 */ |
|
static const unsigned int mpq7920_I_limits2[] = { |
|
2700000, 3900000, 5100000, 6100000 |
|
}; |
|
|
|
/* LDO4 & LDO5 */ |
|
static const unsigned int mpq7920_I_limits3[] = { |
|
300000, 700000 |
|
}; |
|
|
|
static int mpq7920_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay); |
|
static int mpq7920_parse_cb(struct device_node *np, |
|
const struct regulator_desc *rdesc, |
|
struct regulator_config *config); |
|
|
|
/* RTCLDO not controllable, always ON */ |
|
static const struct regulator_ops mpq7920_ldortc_ops = { |
|
.list_voltage = regulator_list_voltage_linear, |
|
.map_voltage = regulator_map_voltage_linear, |
|
.get_voltage_sel = regulator_get_voltage_sel_regmap, |
|
.set_voltage_sel = regulator_set_voltage_sel_regmap, |
|
}; |
|
|
|
static const struct regulator_ops mpq7920_ldo_wo_current_ops = { |
|
.enable = regulator_enable_regmap, |
|
.disable = regulator_disable_regmap, |
|
.is_enabled = regulator_is_enabled_regmap, |
|
.list_voltage = regulator_list_voltage_linear, |
|
.map_voltage = regulator_map_voltage_linear, |
|
.get_voltage_sel = regulator_get_voltage_sel_regmap, |
|
.set_voltage_sel = regulator_set_voltage_sel_regmap, |
|
.set_active_discharge = regulator_set_active_discharge_regmap, |
|
}; |
|
|
|
static const struct regulator_ops mpq7920_ldo_ops = { |
|
.enable = regulator_enable_regmap, |
|
.disable = regulator_disable_regmap, |
|
.is_enabled = regulator_is_enabled_regmap, |
|
.list_voltage = regulator_list_voltage_linear, |
|
.map_voltage = regulator_map_voltage_linear, |
|
.get_voltage_sel = regulator_get_voltage_sel_regmap, |
|
.set_voltage_sel = regulator_set_voltage_sel_regmap, |
|
.set_active_discharge = regulator_set_active_discharge_regmap, |
|
.get_current_limit = regulator_get_current_limit_regmap, |
|
.set_current_limit = regulator_set_current_limit_regmap, |
|
}; |
|
|
|
static const struct regulator_ops mpq7920_buck_ops = { |
|
.enable = regulator_enable_regmap, |
|
.disable = regulator_disable_regmap, |
|
.is_enabled = regulator_is_enabled_regmap, |
|
.list_voltage = regulator_list_voltage_linear, |
|
.map_voltage = regulator_map_voltage_linear, |
|
.get_voltage_sel = regulator_get_voltage_sel_regmap, |
|
.set_voltage_sel = regulator_set_voltage_sel_regmap, |
|
.set_active_discharge = regulator_set_active_discharge_regmap, |
|
.set_soft_start = regulator_set_soft_start_regmap, |
|
.set_ramp_delay = mpq7920_set_ramp_delay, |
|
}; |
|
|
|
static struct regulator_desc mpq7920_regulators_desc[MPQ7920_MAX_REGULATORS] = { |
|
MPQ7920BUCK("buck1", 1, mpq7920_I_limits1), |
|
MPQ7920BUCK("buck2", 2, mpq7920_I_limits2), |
|
MPQ7920BUCK("buck3", 3, mpq7920_I_limits1), |
|
MPQ7920BUCK("buck4", 4, mpq7920_I_limits2), |
|
MPQ7920LDO("ldortc", 1, &mpq7920_ldortc_ops, NULL, 0, 0, 0), |
|
MPQ7920LDO("ldo2", 2, &mpq7920_ldo_wo_current_ops, NULL, 0, 0, 0), |
|
MPQ7920LDO("ldo3", 3, &mpq7920_ldo_wo_current_ops, NULL, 0, 0, 0), |
|
MPQ7920LDO("ldo4", 4, &mpq7920_ldo_ops, mpq7920_I_limits3, |
|
ARRAY_SIZE(mpq7920_I_limits3), MPQ7920_LDO4_REG_B, |
|
MPQ7920_MASK_LDO_ILIM), |
|
MPQ7920LDO("ldo5", 5, &mpq7920_ldo_ops, mpq7920_I_limits3, |
|
ARRAY_SIZE(mpq7920_I_limits3), MPQ7920_LDO5_REG_B, |
|
MPQ7920_MASK_LDO_ILIM), |
|
}; |
|
|
|
/* |
|
* DVS ramp rate BUCK1 to BUCK4 |
|
* 00-01: Reserved |
|
* 10: 8mV/us |
|
* 11: 4mV/us |
|
*/ |
|
static int mpq7920_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) |
|
{ |
|
unsigned int ramp_val; |
|
|
|
if (ramp_delay > 8000 || ramp_delay < 0) |
|
return -EINVAL; |
|
|
|
if (ramp_delay <= 4000) |
|
ramp_val = 3; |
|
else |
|
ramp_val = 2; |
|
|
|
return regmap_update_bits(rdev->regmap, MPQ7920_REG_CTL0, |
|
MPQ7920_MASK_DVS_SLEWRATE, ramp_val << 6); |
|
} |
|
|
|
static int mpq7920_parse_cb(struct device_node *np, |
|
const struct regulator_desc *desc, |
|
struct regulator_config *config) |
|
{ |
|
uint8_t val; |
|
int ret; |
|
struct mpq7920_regulator_info *info = config->driver_data; |
|
struct regulator_desc *rdesc = &info->rdesc[desc->id]; |
|
|
|
if (of_property_read_bool(np, "mps,buck-ovp-disable")) { |
|
regmap_update_bits(config->regmap, |
|
MPQ7920_BUCK1_REG_B + (rdesc->id * 4), |
|
MPQ7920_MASK_OVP, MPQ7920_OVP_DISABLE); |
|
} |
|
|
|
ret = of_property_read_u8(np, "mps,buck-phase-delay", &val); |
|
if (!ret) { |
|
regmap_update_bits(config->regmap, |
|
MPQ7920_BUCK1_REG_C + (rdesc->id * 4), |
|
MPQ7920_MASK_BUCK_PHASE_DEALY, |
|
(val & 3) << 4); |
|
} |
|
|
|
ret = of_property_read_u8(np, "mps,buck-softstart", &val); |
|
if (!ret) |
|
rdesc->soft_start_val_on = (val & 3) << 2; |
|
|
|
return 0; |
|
} |
|
|
|
static void mpq7920_parse_dt(struct device *dev, |
|
struct mpq7920_regulator_info *info) |
|
{ |
|
int ret; |
|
struct device_node *np = dev->of_node; |
|
uint8_t freq; |
|
|
|
np = of_get_child_by_name(np, "regulators"); |
|
if (!np) { |
|
dev_err(dev, "missing 'regulators' subnode in DT\n"); |
|
return; |
|
} |
|
|
|
ret = of_property_read_u8(np, "mps,switch-freq", &freq); |
|
if (!ret) { |
|
regmap_update_bits(info->regmap, MPQ7920_REG_CTL0, |
|
MPQ7920_MASK_SWITCH_FREQ, |
|
(freq & 3) << 4); |
|
} |
|
|
|
of_node_put(np); |
|
} |
|
|
|
static int mpq7920_i2c_probe(struct i2c_client *client) |
|
{ |
|
struct device *dev = &client->dev; |
|
struct mpq7920_regulator_info *info; |
|
struct regulator_config config = { NULL, }; |
|
struct regulator_dev *rdev; |
|
struct regmap *regmap; |
|
int i; |
|
|
|
info = devm_kzalloc(dev, sizeof(struct mpq7920_regulator_info), |
|
GFP_KERNEL); |
|
if (!info) |
|
return -ENOMEM; |
|
|
|
info->rdesc = mpq7920_regulators_desc; |
|
regmap = devm_regmap_init_i2c(client, &mpq7920_regmap_config); |
|
if (IS_ERR(regmap)) { |
|
dev_err(dev, "Failed to allocate regmap!\n"); |
|
return PTR_ERR(regmap); |
|
} |
|
|
|
i2c_set_clientdata(client, info); |
|
info->regmap = regmap; |
|
if (client->dev.of_node) |
|
mpq7920_parse_dt(&client->dev, info); |
|
|
|
config.dev = dev; |
|
config.regmap = regmap; |
|
config.driver_data = info; |
|
|
|
for (i = 0; i < MPQ7920_MAX_REGULATORS; i++) { |
|
rdev = devm_regulator_register(dev, |
|
&mpq7920_regulators_desc[i], |
|
&config); |
|
if (IS_ERR(rdev)) { |
|
dev_err(dev, "Failed to register regulator!\n"); |
|
return PTR_ERR(rdev); |
|
} |
|
} |
|
|
|
return 0; |
|
} |
|
|
|
static const struct of_device_id mpq7920_of_match[] = { |
|
{ .compatible = "mps,mpq7920"}, |
|
{}, |
|
}; |
|
MODULE_DEVICE_TABLE(of, mpq7920_of_match); |
|
|
|
static const struct i2c_device_id mpq7920_id[] = { |
|
{ "mpq7920", }, |
|
{ }, |
|
}; |
|
MODULE_DEVICE_TABLE(i2c, mpq7920_id); |
|
|
|
static struct i2c_driver mpq7920_regulator_driver = { |
|
.driver = { |
|
.name = "mpq7920", |
|
.of_match_table = of_match_ptr(mpq7920_of_match), |
|
}, |
|
.probe_new = mpq7920_i2c_probe, |
|
.id_table = mpq7920_id, |
|
}; |
|
module_i2c_driver(mpq7920_regulator_driver); |
|
|
|
MODULE_AUTHOR("Saravanan Sekar <[email protected]>"); |
|
MODULE_DESCRIPTION("MPQ7920 PMIC regulator driver"); |
|
MODULE_LICENSE("GPL");
|
|
|