mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
851 lines
16 KiB
851 lines
16 KiB
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
|
/* |
|
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. |
|
* Copyright (c) 2018 Akash Gajjar <[email protected]> |
|
*/ |
|
|
|
#include <dt-bindings/input/linux-event-codes.h> |
|
#include <dt-bindings/pwm/pwm.h> |
|
#include "rk3399.dtsi" |
|
#include "rk3399-opp.dtsi" |
|
|
|
/ { |
|
chosen { |
|
stdout-path = "serial2:1500000n8"; |
|
}; |
|
|
|
clkin_gmac: external-gmac-clock { |
|
compatible = "fixed-clock"; |
|
clock-frequency = <125000000>; |
|
clock-output-names = "clkin_gmac"; |
|
#clock-cells = <0>; |
|
}; |
|
|
|
gpio-keys { |
|
compatible = "gpio-keys"; |
|
autorepeat; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&pwrbtn>; |
|
|
|
power { |
|
debounce-interval = <100>; |
|
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; |
|
label = "GPIO Key Power"; |
|
linux,code = <KEY_POWER>; |
|
wakeup-source; |
|
}; |
|
}; |
|
|
|
leds { |
|
compatible = "gpio-leds"; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&work_led_pin>, <&diy_led_pin>; |
|
|
|
work_led: led-0 { |
|
label = "work"; |
|
default-state = "on"; |
|
gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; |
|
}; |
|
|
|
diy_led: led-1 { |
|
label = "diy"; |
|
default-state = "off"; |
|
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; |
|
}; |
|
}; |
|
|
|
fan: pwm-fan { |
|
compatible = "pwm-fan"; |
|
#cooling-cells = <2>; |
|
fan-supply = <&vcc12v_dcin>; |
|
pwms = <&pwm1 0 50000 0>; |
|
}; |
|
|
|
sdio_pwrseq: sdio-pwrseq { |
|
compatible = "mmc-pwrseq-simple"; |
|
clocks = <&rk808 1>; |
|
clock-names = "ext_clock"; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&wifi_enable_h>; |
|
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; |
|
}; |
|
|
|
sound { |
|
compatible = "audio-graph-card"; |
|
label = "Analog"; |
|
dais = <&i2s1_p0>; |
|
}; |
|
|
|
sound-dit { |
|
compatible = "audio-graph-card"; |
|
label = "SPDIF"; |
|
dais = <&spdif_p0>; |
|
}; |
|
|
|
spdif-dit { |
|
compatible = "linux,spdif-dit"; |
|
#sound-dai-cells = <0>; |
|
|
|
port { |
|
dit_p0_0: endpoint { |
|
remote-endpoint = <&spdif_p0_0>; |
|
}; |
|
}; |
|
}; |
|
|
|
vcc12v_dcin: vcc12v-dcin { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcc12v_dcin"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <12000000>; |
|
regulator-max-microvolt = <12000000>; |
|
}; |
|
|
|
/* switched by pmic_sleep */ |
|
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcc1v8_s3"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
vin-supply = <&vcc_1v8>; |
|
}; |
|
|
|
/* micro SD card power */ |
|
vcc3v0_sd: vcc3v0-sd { |
|
compatible = "regulator-fixed"; |
|
enable-active-high; |
|
gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&sdmmc0_pwr_h>; |
|
regulator-name = "vcc3v0_sd"; |
|
regulator-always-on; |
|
regulator-min-microvolt = <3000000>; |
|
regulator-max-microvolt = <3000000>; |
|
vin-supply = <&vcc3v3_sys>; |
|
|
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vcc3v3_pcie: vcc3v3-pcie-regulator { |
|
compatible = "regulator-fixed"; |
|
enable-active-high; |
|
gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&pcie_pwr_en>; |
|
regulator-name = "vcc3v3_pcie"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
vin-supply = <&vcc12v_dcin>; |
|
}; |
|
|
|
vcc3v3_sys: vcc3v3-sys { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcc3v3_sys"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
vin-supply = <&vcc5v0_sys>; |
|
}; |
|
|
|
/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ |
|
vcc5v0_host: vcc5v0-host-regulator { |
|
compatible = "regulator-fixed"; |
|
enable-active-high; |
|
gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&vcc5v0_host_en>; |
|
regulator-name = "vcc5v0_host"; |
|
regulator-always-on; |
|
vin-supply = <&vcc5v0_usb>; |
|
}; |
|
|
|
vcc5v0_typec: vcc5v0-typec-regulator { |
|
compatible = "regulator-fixed"; |
|
enable-active-high; |
|
gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&vcc5v0_typec_en>; |
|
regulator-name = "vcc5v0_typec"; |
|
regulator-always-on; |
|
vin-supply = <&vcc5v0_usb>; |
|
}; |
|
|
|
vcc5v0_sys: vcc5v0-sys { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcc5v0_sys"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <5000000>; |
|
regulator-max-microvolt = <5000000>; |
|
vin-supply = <&vcc12v_dcin>; |
|
}; |
|
|
|
vcc5v0_usb: vcc5v0-usb { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcc5v0_usb"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <5000000>; |
|
regulator-max-microvolt = <5000000>; |
|
vin-supply = <&vcc12v_dcin>; |
|
}; |
|
|
|
vdd_log: vdd-log { |
|
compatible = "pwm-regulator"; |
|
pwms = <&pwm2 0 25000 1>; |
|
regulator-name = "vdd_log"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <800000>; |
|
regulator-max-microvolt = <1700000>; |
|
vin-supply = <&vcc5v0_sys>; |
|
}; |
|
}; |
|
|
|
&cpu_l0 { |
|
cpu-supply = <&vdd_cpu_l>; |
|
}; |
|
|
|
&cpu_l1 { |
|
cpu-supply = <&vdd_cpu_l>; |
|
}; |
|
|
|
&cpu_l2 { |
|
cpu-supply = <&vdd_cpu_l>; |
|
}; |
|
|
|
&cpu_l3 { |
|
cpu-supply = <&vdd_cpu_l>; |
|
}; |
|
|
|
&cpu_b0 { |
|
cpu-supply = <&vdd_cpu_b>; |
|
}; |
|
|
|
&cpu_b1 { |
|
cpu-supply = <&vdd_cpu_b>; |
|
}; |
|
|
|
&emmc_phy { |
|
status = "okay"; |
|
}; |
|
|
|
&gmac { |
|
assigned-clocks = <&cru SCLK_RMII_SRC>; |
|
assigned-clock-parents = <&clkin_gmac>; |
|
clock_in_out = "input"; |
|
phy-supply = <&vcc_lan>; |
|
phy-mode = "rgmii"; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&rgmii_pins>; |
|
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; |
|
snps,reset-active-low; |
|
snps,reset-delays-us = <0 10000 50000>; |
|
tx_delay = <0x28>; |
|
rx_delay = <0x11>; |
|
status = "okay"; |
|
}; |
|
|
|
&hdmi { |
|
ddc-i2c-bus = <&i2c3>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&hdmi_cec>; |
|
status = "okay"; |
|
}; |
|
|
|
&hdmi_sound { |
|
status = "okay"; |
|
}; |
|
|
|
&gpu { |
|
mali-supply = <&vdd_gpu>; |
|
status = "okay"; |
|
}; |
|
|
|
&i2c0 { |
|
clock-frequency = <400000>; |
|
i2c-scl-rising-time-ns = <168>; |
|
i2c-scl-falling-time-ns = <4>; |
|
status = "okay"; |
|
|
|
rk808: pmic@1b { |
|
compatible = "rockchip,rk808"; |
|
reg = <0x1b>; |
|
interrupt-parent = <&gpio3>; |
|
interrupts = <10 IRQ_TYPE_LEVEL_LOW>; |
|
#clock-cells = <1>; |
|
clock-output-names = "xin32k", "rk808-clkout2"; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&pmic_int_l>; |
|
rockchip,system-power-controller; |
|
wakeup-source; |
|
|
|
vcc1-supply = <&vcc5v0_sys>; |
|
vcc2-supply = <&vcc5v0_sys>; |
|
vcc3-supply = <&vcc5v0_sys>; |
|
vcc4-supply = <&vcc5v0_sys>; |
|
vcc6-supply = <&vcc5v0_sys>; |
|
vcc7-supply = <&vcc5v0_sys>; |
|
vcc8-supply = <&vcc3v3_sys>; |
|
vcc9-supply = <&vcc5v0_sys>; |
|
vcc10-supply = <&vcc5v0_sys>; |
|
vcc11-supply = <&vcc5v0_sys>; |
|
vcc12-supply = <&vcc3v3_sys>; |
|
vddio-supply = <&vcca_1v8>; |
|
|
|
regulators { |
|
vdd_center: DCDC_REG1 { |
|
regulator-name = "vdd_center"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <750000>; |
|
regulator-max-microvolt = <1350000>; |
|
regulator-ramp-delay = <6001>; |
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vdd_cpu_l: DCDC_REG2 { |
|
regulator-name = "vdd_cpu_l"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <750000>; |
|
regulator-max-microvolt = <1350000>; |
|
regulator-ramp-delay = <6001>; |
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vcc_ddr: DCDC_REG3 { |
|
regulator-name = "vcc_ddr"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
}; |
|
}; |
|
|
|
vcc_1v8: DCDC_REG4 { |
|
regulator-name = "vcc_1v8"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
regulator-suspend-microvolt = <1800000>; |
|
}; |
|
}; |
|
|
|
vcc1v8_dvp: LDO_REG1 { |
|
regulator-name = "vcc1v8_dvp"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vcc3v0_touch: LDO_REG2 { |
|
regulator-name = "vcc3v0_touch"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <3000000>; |
|
regulator-max-microvolt = <3000000>; |
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vcca_1v8: LDO_REG3 { |
|
regulator-name = "vcca_1v8"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
regulator-suspend-microvolt = <1800000>; |
|
}; |
|
}; |
|
|
|
vcc_sdio: LDO_REG4 { |
|
regulator-name = "vcc_sdio"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <3000000>; |
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
regulator-suspend-microvolt = <3000000>; |
|
}; |
|
}; |
|
|
|
vcca3v0_codec: LDO_REG5 { |
|
regulator-name = "vcca3v0_codec"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <3000000>; |
|
regulator-max-microvolt = <3000000>; |
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vcc_1v5: LDO_REG6 { |
|
regulator-name = "vcc_1v5"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <1500000>; |
|
regulator-max-microvolt = <1500000>; |
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
regulator-suspend-microvolt = <1500000>; |
|
}; |
|
}; |
|
|
|
vcca1v8_codec: LDO_REG7 { |
|
regulator-name = "vcca1v8_codec"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vcc_3v0: LDO_REG8 { |
|
regulator-name = "vcc_3v0"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <3000000>; |
|
regulator-max-microvolt = <3000000>; |
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
regulator-suspend-microvolt = <3000000>; |
|
}; |
|
}; |
|
|
|
vcc3v3_s3: vcc_lan: SWITCH_REG1 { |
|
regulator-name = "vcc3v3_s3"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vcc3v3_s0: SWITCH_REG2 { |
|
regulator-name = "vcc3v3_s0"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
vdd_cpu_b: regulator@40 { |
|
compatible = "silergy,syr827"; |
|
reg = <0x40>; |
|
fcs,suspend-voltage-selector = <1>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&vsel1_pin>; |
|
regulator-name = "vdd_cpu_b"; |
|
regulator-min-microvolt = <712500>; |
|
regulator-max-microvolt = <1500000>; |
|
regulator-ramp-delay = <1000>; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
vin-supply = <&vcc5v0_sys>; |
|
|
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vdd_gpu: regulator@41 { |
|
compatible = "silergy,syr828"; |
|
reg = <0x41>; |
|
fcs,suspend-voltage-selector = <1>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&vsel2_pin>; |
|
regulator-name = "vdd_gpu"; |
|
regulator-min-microvolt = <712500>; |
|
regulator-max-microvolt = <1500000>; |
|
regulator-ramp-delay = <1000>; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
vin-supply = <&vcc5v0_sys>; |
|
|
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
}; |
|
|
|
&i2c1 { |
|
i2c-scl-rising-time-ns = <300>; |
|
i2c-scl-falling-time-ns = <15>; |
|
status = "okay"; |
|
}; |
|
|
|
&i2c3 { |
|
i2c-scl-rising-time-ns = <450>; |
|
i2c-scl-falling-time-ns = <15>; |
|
status = "okay"; |
|
}; |
|
|
|
&i2c4 { |
|
i2c-scl-rising-time-ns = <600>; |
|
i2c-scl-falling-time-ns = <20>; |
|
status = "okay"; |
|
|
|
fusb0: typec-portc@22 { |
|
compatible = "fcs,fusb302"; |
|
reg = <0x22>; |
|
interrupt-parent = <&gpio1>; |
|
interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&fusb0_int>; |
|
vbus-supply = <&vcc5v0_typec>; |
|
status = "okay"; |
|
}; |
|
}; |
|
|
|
&i2s0 { |
|
rockchip,playback-channels = <8>; |
|
rockchip,capture-channels = <8>; |
|
status = "okay"; |
|
}; |
|
|
|
&i2s1 { |
|
rockchip,playback-channels = <2>; |
|
rockchip,capture-channels = <2>; |
|
status = "okay"; |
|
|
|
i2s1_p0: port { |
|
i2s1_p0_0: endpoint { |
|
dai-format = "i2s"; |
|
mclk-fs = <256>; |
|
remote-endpoint = <&es8316_p0_0>; |
|
}; |
|
}; |
|
}; |
|
|
|
&i2s2 { |
|
status = "okay"; |
|
}; |
|
|
|
&io_domains { |
|
status = "okay"; |
|
|
|
bt656-supply = <&vcc1v8_dvp>; |
|
audio-supply = <&vcc_3v0>; |
|
sdmmc-supply = <&vcc_sdio>; |
|
gpio1830-supply = <&vcc_3v0>; |
|
}; |
|
|
|
&pcie0 { |
|
ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; |
|
num-lanes = <4>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&pcie_perst>; |
|
vpcie12v-supply = <&vcc12v_dcin>; |
|
vpcie3v3-supply = <&vcc3v3_pcie>; |
|
status = "okay"; |
|
}; |
|
|
|
&pcie_phy { |
|
status = "okay"; |
|
}; |
|
|
|
&pmu_io_domains { |
|
pmu1830-supply = <&vcc_3v0>; |
|
status = "okay"; |
|
}; |
|
|
|
&pinctrl { |
|
bt { |
|
bt_enable_h: bt-enable-h { |
|
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
|
|
bt_host_wake_l: bt-host-wake-l { |
|
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; |
|
}; |
|
|
|
bt_wake_l: bt-wake-l { |
|
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
}; |
|
|
|
buttons { |
|
pwrbtn: pwrbtn { |
|
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; |
|
}; |
|
}; |
|
|
|
fusb302x { |
|
fusb0_int: fusb0-int { |
|
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; |
|
}; |
|
}; |
|
|
|
leds { |
|
work_led_pin: work-led-pin { |
|
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
|
|
diy_led_pin: diy-led-pin { |
|
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
}; |
|
|
|
pcie { |
|
pcie_perst: pcie-perst { |
|
rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
|
|
pcie_pwr_en: pcie-pwr-en { |
|
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
}; |
|
|
|
pmic { |
|
pmic_int_l: pmic-int-l { |
|
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; |
|
}; |
|
|
|
vsel1_pin: vsel1-pin { |
|
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; |
|
}; |
|
|
|
vsel2_pin: vsel2-pin { |
|
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; |
|
}; |
|
}; |
|
|
|
sdcard { |
|
sdmmc0_pwr_h: sdmmc0-pwr-h { |
|
rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
|
|
}; |
|
|
|
sdio-pwrseq { |
|
wifi_enable_h: wifi-enable-h { |
|
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
}; |
|
|
|
usb-typec { |
|
vcc5v0_typec_en: vcc5v0_typec_en { |
|
rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; |
|
}; |
|
}; |
|
|
|
usb2 { |
|
vcc5v0_host_en: vcc5v0-host-en { |
|
rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
}; |
|
}; |
|
|
|
&pwm0 { |
|
status = "okay"; |
|
}; |
|
|
|
&pwm1 { |
|
status = "okay"; |
|
}; |
|
|
|
&pwm2 { |
|
status = "okay"; |
|
}; |
|
|
|
&saradc { |
|
vref-supply = <&vcca1v8_s3>; |
|
status = "okay"; |
|
}; |
|
|
|
&sdio0 { |
|
bus-width = <4>; |
|
cap-sd-highspeed; |
|
cap-sdio-irq; |
|
disable-wp; |
|
keep-power-in-suspend; |
|
mmc-pwrseq = <&sdio_pwrseq>; |
|
non-removable; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; |
|
sd-uhs-sdr104; |
|
status = "okay"; |
|
}; |
|
|
|
&sdmmc { |
|
bus-width = <4>; |
|
cap-sd-highspeed; |
|
cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; |
|
disable-wp; |
|
max-frequency = <150000000>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; |
|
vmmc-supply = <&vcc3v0_sd>; |
|
vqmmc-supply = <&vcc_sdio>; |
|
status = "okay"; |
|
}; |
|
|
|
&sdhci { |
|
bus-width = <8>; |
|
mmc-hs200-1_8v; |
|
non-removable; |
|
status = "okay"; |
|
}; |
|
|
|
&spdif { |
|
pinctrl-0 = <&spdif_bus_1>; |
|
|
|
spdif_p0: port { |
|
spdif_p0_0: endpoint { |
|
remote-endpoint = <&dit_p0_0>; |
|
}; |
|
}; |
|
}; |
|
|
|
&spi1 { |
|
status = "okay"; |
|
|
|
flash@0 { |
|
compatible = "jedec,spi-nor"; |
|
reg = <0>; |
|
spi-max-frequency = <10000000>; |
|
}; |
|
}; |
|
|
|
&tcphy0 { |
|
status = "okay"; |
|
}; |
|
|
|
&tcphy1 { |
|
status = "okay"; |
|
}; |
|
|
|
&tsadc { |
|
/* tshut mode 0:CRU 1:GPIO */ |
|
rockchip,hw-tshut-mode = <1>; |
|
/* tshut polarity 0:LOW 1:HIGH */ |
|
rockchip,hw-tshut-polarity = <1>; |
|
status = "okay"; |
|
}; |
|
|
|
&u2phy0 { |
|
status = "okay"; |
|
|
|
u2phy0_otg: otg-port { |
|
status = "okay"; |
|
}; |
|
|
|
u2phy0_host: host-port { |
|
phy-supply = <&vcc5v0_host>; |
|
status = "okay"; |
|
}; |
|
}; |
|
|
|
&u2phy1 { |
|
status = "okay"; |
|
|
|
u2phy1_otg: otg-port { |
|
status = "okay"; |
|
}; |
|
|
|
u2phy1_host: host-port { |
|
phy-supply = <&vcc5v0_host>; |
|
status = "okay"; |
|
}; |
|
}; |
|
|
|
&uart0 { |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; |
|
status = "okay"; |
|
|
|
bluetooth { |
|
compatible = "brcm,bcm43438-bt"; |
|
clocks = <&rk808 1>; |
|
clock-names = "lpo"; |
|
device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; |
|
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; |
|
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; |
|
vbat-supply = <&vcc3v3_sys>; |
|
vddio-supply = <&vcc_1v8>; |
|
}; |
|
}; |
|
|
|
&uart2 { |
|
status = "okay"; |
|
}; |
|
|
|
&usb_host0_ehci { |
|
status = "okay"; |
|
}; |
|
|
|
&usb_host0_ohci { |
|
status = "okay"; |
|
}; |
|
|
|
&usb_host1_ehci { |
|
status = "okay"; |
|
}; |
|
|
|
&usb_host1_ohci { |
|
status = "okay"; |
|
}; |
|
|
|
&usbdrd3_0 { |
|
status = "okay"; |
|
}; |
|
|
|
&usbdrd_dwc3_0 { |
|
status = "okay"; |
|
dr_mode = "host"; |
|
}; |
|
|
|
&usbdrd3_1 { |
|
status = "okay"; |
|
}; |
|
|
|
&usbdrd_dwc3_1 { |
|
status = "okay"; |
|
dr_mode = "host"; |
|
}; |
|
|
|
&vopb { |
|
status = "okay"; |
|
}; |
|
|
|
&vopb_mmu { |
|
status = "okay"; |
|
}; |
|
|
|
&vopl { |
|
status = "okay"; |
|
}; |
|
|
|
&vopl_mmu { |
|
status = "okay"; |
|
};
|
|
|