mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
385 lines
6.8 KiB
385 lines
6.8 KiB
// SPDX-License-Identifier: GPL-2.0-only |
|
|
|
/dts-v1/; |
|
|
|
#include "msm8916-pm8916.dtsi" |
|
#include <dt-bindings/gpio/gpio.h> |
|
#include <dt-bindings/input/input.h> |
|
#include <dt-bindings/interrupt-controller/irq.h> |
|
#include <dt-bindings/leds/common.h> |
|
|
|
/ { |
|
model = "Longcheer L8150"; |
|
compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916"; |
|
|
|
aliases { |
|
serial0 = &blsp1_uart2; |
|
}; |
|
|
|
chosen { |
|
stdout-path = "serial0"; |
|
}; |
|
|
|
reserved-memory { |
|
// wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 |
|
/delete-node/ wcnss@89300000; |
|
|
|
wcnss_mem: wcnss@8b600000 { |
|
reg = <0x0 0x8b600000 0x0 0x600000>; |
|
no-map; |
|
}; |
|
}; |
|
|
|
// FIXME: Use extcon device provided by charger driver when available |
|
usb_vbus: usb-vbus { |
|
compatible = "linux,extcon-usb-gpio"; |
|
vbus-gpio = <&msmgpio 62 GPIO_ACTIVE_HIGH>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&usb_vbus_default>; |
|
}; |
|
|
|
gpio-keys { |
|
compatible = "gpio-keys"; |
|
|
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&gpio_keys_default>; |
|
|
|
label = "GPIO Buttons"; |
|
|
|
volume-up { |
|
label = "Volume Up"; |
|
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; |
|
linux,code = <KEY_VOLUMEUP>; |
|
}; |
|
}; |
|
|
|
reg_ctp: regulator-ctp { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "ctp"; |
|
|
|
regulator-min-microvolt = <2800000>; |
|
regulator-max-microvolt = <2800000>; |
|
|
|
gpio = <&msmgpio 17 GPIO_ACTIVE_HIGH>; |
|
enable-active-high; |
|
|
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&ctp_pwr_en_default>; |
|
}; |
|
|
|
flash-led-controller { |
|
compatible = "sgmicro,sgm3140"; |
|
flash-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>; |
|
enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; |
|
|
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&camera_flash_default>; |
|
|
|
flash_led: led { |
|
function = LED_FUNCTION_FLASH; |
|
color = <LED_COLOR_ID_WHITE>; |
|
flash-max-timeout-us = <250000>; |
|
}; |
|
}; |
|
}; |
|
|
|
&blsp_i2c1 { |
|
status = "okay"; |
|
|
|
led-controller@45 { |
|
compatible = "awinic,aw2013"; |
|
reg = <0x45>; |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
vcc-supply = <&pm8916_l17>; |
|
|
|
led@0 { |
|
reg = <0>; |
|
led-max-microamp = <5000>; |
|
function = LED_FUNCTION_INDICATOR; |
|
color = <LED_COLOR_ID_RED>; |
|
}; |
|
|
|
led@1 { |
|
reg = <1>; |
|
led-max-microamp = <5000>; |
|
function = LED_FUNCTION_INDICATOR; |
|
color = <LED_COLOR_ID_GREEN>; |
|
}; |
|
|
|
led@2 { |
|
reg = <2>; |
|
led-max-microamp = <5000>; |
|
function = LED_FUNCTION_INDICATOR; |
|
color = <LED_COLOR_ID_BLUE>; |
|
}; |
|
}; |
|
}; |
|
|
|
&blsp_i2c2 { |
|
status = "okay"; |
|
|
|
accelerometer@10 { |
|
compatible = "bosch,bmc150_accel"; |
|
reg = <0x10>; |
|
|
|
vdd-supply = <&pm8916_l17>; |
|
vddio-supply = <&pm8916_l6>; |
|
|
|
mount-matrix = "0", "1", "0", |
|
"-1", "0", "0", |
|
"0", "0", "1"; |
|
}; |
|
|
|
magnetometer@12 { |
|
compatible = "bosch,bmc150_magn"; |
|
reg = <0x12>; |
|
|
|
vdd-supply = <&pm8916_l17>; |
|
vddio-supply = <&pm8916_l6>; |
|
}; |
|
|
|
gyroscope@68 { |
|
compatible = "bosch,bmg160"; |
|
reg = <0x68>; |
|
|
|
interrupt-parent = <&msmgpio>; |
|
interrupts = <23 IRQ_TYPE_EDGE_RISING>; |
|
|
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&gyro_int_default>; |
|
|
|
vdd-supply = <&pm8916_l17>; |
|
vddio-supply = <&pm8916_l6>; |
|
}; |
|
}; |
|
|
|
&blsp_i2c5 { |
|
status = "okay"; |
|
|
|
rmi4@20 { |
|
compatible = "syna,rmi4-i2c"; |
|
reg = <0x20>; |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
interrupt-parent = <&msmgpio>; |
|
interrupts = <13 IRQ_TYPE_EDGE_FALLING>; |
|
|
|
vdd-supply = <®_ctp>; |
|
vio-supply = <&pm8916_l6>; |
|
|
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&tp_int_default>; |
|
|
|
syna,startup-delay-ms = <10>; |
|
|
|
rmi4-f01@1 { |
|
reg = <0x1>; |
|
syna,nosleep-mode = <1>; // Allow sleeping |
|
}; |
|
|
|
rmi4-f12@12 { |
|
reg = <0x12>; |
|
syna,sensor-type = <1>; // Touchscreen |
|
}; |
|
}; |
|
}; |
|
|
|
&blsp1_uart2 { |
|
status = "okay"; |
|
}; |
|
|
|
&pm8916_resin { |
|
status = "okay"; |
|
linux,code = <KEY_VOLUMEDOWN>; |
|
}; |
|
|
|
&pm8916_vib { |
|
status = "okay"; |
|
}; |
|
|
|
&pronto { |
|
status = "okay"; |
|
}; |
|
|
|
&sdhc_1 { |
|
status = "okay"; |
|
|
|
pinctrl-names = "default", "sleep"; |
|
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; |
|
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; |
|
}; |
|
|
|
&sdhc_2 { |
|
status = "okay"; |
|
|
|
pinctrl-names = "default", "sleep"; |
|
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; |
|
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; |
|
|
|
non-removable; |
|
}; |
|
|
|
&usb { |
|
status = "okay"; |
|
dr_mode = "peripheral"; |
|
extcon = <&usb_vbus>; |
|
}; |
|
|
|
&usb_hs_phy { |
|
extcon = <&usb_vbus>; |
|
}; |
|
|
|
&smd_rpm_regulators { |
|
vdd_l1_l2_l3-supply = <&pm8916_s3>; |
|
vdd_l4_l5_l6-supply = <&pm8916_s4>; |
|
vdd_l7-supply = <&pm8916_s4>; |
|
|
|
s3 { |
|
regulator-min-microvolt = <1200000>; |
|
regulator-max-microvolt = <1300000>; |
|
}; |
|
|
|
s4 { |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <2100000>; |
|
}; |
|
|
|
l1 { |
|
regulator-min-microvolt = <1225000>; |
|
regulator-max-microvolt = <1225000>; |
|
}; |
|
|
|
l2 { |
|
regulator-min-microvolt = <1200000>; |
|
regulator-max-microvolt = <1200000>; |
|
}; |
|
|
|
l4 { |
|
regulator-min-microvolt = <2050000>; |
|
regulator-max-microvolt = <2050000>; |
|
}; |
|
|
|
l5 { |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
}; |
|
|
|
l6 { |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
}; |
|
|
|
l7 { |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
}; |
|
|
|
l8 { |
|
regulator-min-microvolt = <2850000>; |
|
regulator-max-microvolt = <2900000>; |
|
}; |
|
|
|
l9 { |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
}; |
|
|
|
l10 { |
|
regulator-min-microvolt = <2700000>; |
|
regulator-max-microvolt = <2800000>; |
|
}; |
|
|
|
l11 { |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <2950000>; |
|
regulator-allow-set-load; |
|
regulator-system-load = <200000>; |
|
}; |
|
|
|
l12 { |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <2950000>; |
|
}; |
|
|
|
l13 { |
|
regulator-min-microvolt = <3075000>; |
|
regulator-max-microvolt = <3075000>; |
|
}; |
|
|
|
l14 { |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <3300000>; |
|
}; |
|
|
|
l15 { |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <3300000>; |
|
}; |
|
|
|
l16 { |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <3300000>; |
|
}; |
|
|
|
l17 { |
|
regulator-min-microvolt = <2850000>; |
|
regulator-max-microvolt = <2850000>; |
|
}; |
|
|
|
l18 { |
|
regulator-min-microvolt = <2700000>; |
|
regulator-max-microvolt = <2700000>; |
|
}; |
|
}; |
|
|
|
&msmgpio { |
|
camera_flash_default: camera-flash-default { |
|
pins = "gpio31", "gpio32"; |
|
function = "gpio"; |
|
|
|
drive-strength = <2>; |
|
bias-disable; |
|
}; |
|
|
|
ctp_pwr_en_default: ctp-pwr-en-default { |
|
pins = "gpio17"; |
|
function = "gpio"; |
|
|
|
drive-strength = <2>; |
|
bias-disable; |
|
}; |
|
|
|
gpio_keys_default: gpio-keys-default { |
|
pins = "gpio107"; |
|
function = "gpio"; |
|
|
|
drive-strength = <2>; |
|
bias-pull-up; |
|
}; |
|
|
|
gyro_int_default: gyro-int-default { |
|
pins = "gpio23"; |
|
function = "gpio"; |
|
|
|
drive-strength = <2>; |
|
bias-disable; |
|
}; |
|
|
|
tp_int_default: tp-int-default { |
|
pins = "gpio13"; |
|
function = "gpio"; |
|
|
|
drive-strength = <2>; |
|
bias-disable; |
|
}; |
|
|
|
usb_vbus_default: usb-vbus-default { |
|
pins = "gpio62"; |
|
function = "gpio"; |
|
|
|
bias-pull-up; |
|
}; |
|
};
|
|
|