mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
286 lines
5.3 KiB
286 lines
5.3 KiB
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
|
/* |
|
* Copyright (c) 2016 Andreas Färber |
|
* Copyright (c) 2016 BayLibre, Inc. |
|
* Author: Kevin Hilman <[email protected]> |
|
*/ |
|
|
|
#include "meson-gxbb.dtsi" |
|
|
|
/ { |
|
aliases { |
|
serial0 = &uart_AO; |
|
ethernet0 = ðmac; |
|
}; |
|
|
|
chosen { |
|
stdout-path = "serial0:115200n8"; |
|
}; |
|
|
|
memory@0 { |
|
device_type = "memory"; |
|
reg = <0x0 0x0 0x0 0x40000000>; |
|
}; |
|
|
|
leds { |
|
compatible = "gpio-leds"; |
|
|
|
led-system { |
|
label = "wetek-play:system-status"; |
|
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>; |
|
default-state = "on"; |
|
panic-indicator; |
|
}; |
|
}; |
|
|
|
usb_pwr: regulator-usb-pwrs { |
|
compatible = "regulator-fixed"; |
|
|
|
regulator-name = "USB_PWR"; |
|
|
|
regulator-min-microvolt = <5000000>; |
|
regulator-max-microvolt = <5000000>; |
|
|
|
gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; |
|
enable-active-high; |
|
}; |
|
|
|
vddio_boot: regulator-vddio_boot { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "VDDIO_BOOT"; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
}; |
|
|
|
vddao_3v3: regulator-vddao_3v3 { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "VDDAO_3V3"; |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
}; |
|
|
|
vddio_ao18: regulator-vddio_ao18 { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "VDDIO_AO18"; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
}; |
|
|
|
vcc_3v3: regulator-vcc_3v3 { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "VCC_3V3"; |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
}; |
|
|
|
emmc_pwrseq: emmc-pwrseq { |
|
compatible = "mmc-pwrseq-emmc"; |
|
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; |
|
}; |
|
|
|
wifi32k: wifi32k { |
|
compatible = "pwm-clock"; |
|
#clock-cells = <0>; |
|
clock-frequency = <32768>; |
|
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ |
|
}; |
|
|
|
sdio_pwrseq: sdio-pwrseq { |
|
compatible = "mmc-pwrseq-simple"; |
|
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; |
|
clocks = <&wifi32k>; |
|
clock-names = "ext_clock"; |
|
}; |
|
|
|
cvbs-connector { |
|
compatible = "composite-video-connector"; |
|
|
|
port { |
|
cvbs_connector_in: endpoint { |
|
remote-endpoint = <&cvbs_vdac_out>; |
|
}; |
|
}; |
|
}; |
|
|
|
hdmi-connector { |
|
compatible = "hdmi-connector"; |
|
type = "a"; |
|
|
|
port { |
|
hdmi_connector_in: endpoint { |
|
remote-endpoint = <&hdmi_tx_tmds_out>; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
&cec_AO { |
|
status = "okay"; |
|
pinctrl-0 = <&ao_cec_pins>; |
|
pinctrl-names = "default"; |
|
hdmi-phandle = <&hdmi_tx>; |
|
}; |
|
|
|
&cvbs_vdac_port { |
|
cvbs_vdac_out: endpoint { |
|
remote-endpoint = <&cvbs_connector_in>; |
|
}; |
|
}; |
|
|
|
ðmac { |
|
status = "okay"; |
|
pinctrl-0 = <ð_rgmii_pins>; |
|
pinctrl-names = "default"; |
|
|
|
phy-handle = <ð_phy0>; |
|
phy-mode = "rgmii"; |
|
|
|
amlogic,tx-delay-ns = <2>; |
|
|
|
mdio { |
|
compatible = "snps,dwmac-mdio"; |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
eth_phy0: ethernet-phy@0 { |
|
/* Realtek RTL8211F (0x001cc916) */ |
|
reg = <0>; |
|
|
|
reset-assert-us = <10000>; |
|
reset-deassert-us = <80000>; |
|
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; |
|
|
|
interrupt-parent = <&gpio_intc>; |
|
/* MAC_INTR on GPIOZ_15 */ |
|
interrupts = <29 IRQ_TYPE_LEVEL_LOW>; |
|
}; |
|
}; |
|
}; |
|
|
|
&hdmi_tx { |
|
status = "okay"; |
|
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; |
|
pinctrl-names = "default"; |
|
}; |
|
|
|
&hdmi_tx_tmds_port { |
|
hdmi_tx_tmds_out: endpoint { |
|
remote-endpoint = <&hdmi_connector_in>; |
|
}; |
|
}; |
|
|
|
&ir { |
|
status = "okay"; |
|
pinctrl-0 = <&remote_input_ao_pins>; |
|
pinctrl-names = "default"; |
|
}; |
|
|
|
&pwm_ef { |
|
status = "okay"; |
|
pinctrl-0 = <&pwm_e_pins>; |
|
pinctrl-names = "default"; |
|
clocks = <&clkc CLKID_FCLK_DIV4>; |
|
clock-names = "clkin0"; |
|
}; |
|
|
|
&saradc { |
|
status = "okay"; |
|
vref-supply = <&vddio_ao18>; |
|
}; |
|
|
|
/* Wireless SDIO Module */ |
|
&sd_emmc_a { |
|
status = "okay"; |
|
pinctrl-0 = <&sdio_pins>; |
|
pinctrl-1 = <&sdio_clk_gate_pins>; |
|
pinctrl-names = "default", "clk-gate"; |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
bus-width = <4>; |
|
cap-sd-highspeed; |
|
max-frequency = <50000000>; |
|
|
|
non-removable; |
|
disable-wp; |
|
|
|
/* WiFi firmware requires power to be kept while in suspend */ |
|
keep-power-in-suspend; |
|
|
|
mmc-pwrseq = <&sdio_pwrseq>; |
|
|
|
vmmc-supply = <&vddao_3v3>; |
|
vqmmc-supply = <&vddio_boot>; |
|
|
|
brcmf: wifi@1 { |
|
reg = <1>; |
|
compatible = "brcm,bcm4329-fmac"; |
|
}; |
|
}; |
|
|
|
/* SD card */ |
|
&sd_emmc_b { |
|
status = "okay"; |
|
pinctrl-0 = <&sdcard_pins>; |
|
pinctrl-1 = <&sdcard_clk_gate_pins>; |
|
pinctrl-names = "default", "clk-gate"; |
|
|
|
bus-width = <4>; |
|
cap-sd-highspeed; |
|
max-frequency = <50000000>; |
|
disable-wp; |
|
|
|
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; |
|
|
|
vmmc-supply = <&vddao_3v3>; |
|
vqmmc-supply = <&vcc_3v3>; |
|
}; |
|
|
|
/* eMMC */ |
|
&sd_emmc_c { |
|
status = "okay"; |
|
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; |
|
pinctrl-1 = <&emmc_clk_gate_pins>; |
|
pinctrl-names = "default", "clk-gate"; |
|
|
|
bus-width = <8>; |
|
cap-mmc-highspeed; |
|
max-frequency = <200000000>; |
|
non-removable; |
|
disable-wp; |
|
mmc-ddr-1_8v; |
|
mmc-hs200-1_8v; |
|
|
|
mmc-pwrseq = <&emmc_pwrseq>; |
|
vmmc-supply = <&vcc_3v3>; |
|
vqmmc-supply = <&vddio_boot>; |
|
}; |
|
|
|
/* This is connected to the Bluetooth module: */ |
|
&uart_A { |
|
status = "okay"; |
|
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; |
|
pinctrl-names = "default"; |
|
uart-has-rtscts; |
|
|
|
bluetooth { |
|
compatible = "brcm,bcm43438-bt"; |
|
shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; |
|
}; |
|
}; |
|
|
|
/* This UART is brought out to the DB9 connector */ |
|
&uart_AO { |
|
status = "okay"; |
|
pinctrl-0 = <&uart_ao_a_pins>; |
|
pinctrl-names = "default"; |
|
}; |
|
|
|
&usb0_phy { |
|
status = "okay"; |
|
phy-supply = <&usb_pwr>; |
|
}; |
|
|
|
&usb0 { |
|
status = "okay"; |
|
};
|
|
|