mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
416 lines
7.6 KiB
416 lines
7.6 KiB
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
|
// Copyright (C) 2017 Icenowy Zheng <[email protected]> |
|
// Copyright (C) 2018 Vasily Khoruzhick <[email protected]> |
|
|
|
/dts-v1/; |
|
|
|
#include "sun50i-a64.dtsi" |
|
#include "sun50i-a64-cpu-opp.dtsi" |
|
|
|
#include <dt-bindings/gpio/gpio.h> |
|
#include <dt-bindings/input/gpio-keys.h> |
|
#include <dt-bindings/input/input.h> |
|
#include <dt-bindings/pwm/pwm.h> |
|
|
|
/ { |
|
model = "Pinebook"; |
|
compatible = "pine64,pinebook", "allwinner,sun50i-a64"; |
|
|
|
aliases { |
|
serial0 = &uart0; |
|
ethernet0 = &rtl8723cs; |
|
}; |
|
|
|
backlight: backlight { |
|
compatible = "pwm-backlight"; |
|
pwms = <&pwm 0 50000 0>; |
|
brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>; |
|
default-brightness-level = <2>; |
|
enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ |
|
power-supply = <®_vbklt>; |
|
}; |
|
|
|
chosen { |
|
stdout-path = "serial0:115200n8"; |
|
}; |
|
|
|
gpio_keys { |
|
compatible = "gpio-keys"; |
|
|
|
lid_switch { |
|
label = "Lid Switch"; |
|
gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */ |
|
linux,input-type = <EV_SW>; |
|
linux,code = <SW_LID>; |
|
linux,can-disable; |
|
wakeup-source; |
|
wakeup-event-action = <EV_ACT_DEASSERTED>; |
|
}; |
|
}; |
|
|
|
panel_edp: panel-edp { |
|
compatible = "neweast,wjfh116008a"; |
|
backlight = <&backlight>; |
|
power-supply = <®_dc1sw>; |
|
|
|
port { |
|
panel_edp_in: endpoint { |
|
remote-endpoint = <&anx6345_out_edp>; |
|
}; |
|
}; |
|
}; |
|
|
|
reg_vbklt: vbklt { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vbklt"; |
|
regulator-min-microvolt = <18000000>; |
|
regulator-max-microvolt = <18000000>; |
|
gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ |
|
enable-active-high; |
|
}; |
|
|
|
reg_vcc5v0: vcc5v0 { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcc5v0"; |
|
regulator-min-microvolt = <5000000>; |
|
regulator-max-microvolt = <5000000>; |
|
gpio = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; |
|
enable-active-high; |
|
}; |
|
|
|
wifi_pwrseq: wifi_pwrseq { |
|
compatible = "mmc-pwrseq-simple"; |
|
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ |
|
}; |
|
|
|
speaker_amp: audio-amplifier { |
|
compatible = "simple-audio-amplifier"; |
|
VCC-supply = <®_vcc5v0>; |
|
enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ |
|
sound-name-prefix = "Speaker Amp"; |
|
}; |
|
|
|
}; |
|
|
|
&codec { |
|
status = "okay"; |
|
}; |
|
|
|
&codec_analog { |
|
cpvdd-supply = <®_eldo1>; |
|
status = "okay"; |
|
}; |
|
|
|
&cpu0 { |
|
cpu-supply = <®_dcdc2>; |
|
}; |
|
|
|
&cpu1 { |
|
cpu-supply = <®_dcdc2>; |
|
}; |
|
|
|
&cpu2 { |
|
cpu-supply = <®_dcdc2>; |
|
}; |
|
|
|
&cpu3 { |
|
cpu-supply = <®_dcdc2>; |
|
}; |
|
|
|
&dai { |
|
status = "okay"; |
|
}; |
|
|
|
&de { |
|
status = "okay"; |
|
}; |
|
|
|
&ehci0 { |
|
status = "okay"; |
|
}; |
|
|
|
&ehci1 { |
|
status = "okay"; |
|
}; |
|
|
|
&mixer0 { |
|
status = "okay"; |
|
}; |
|
|
|
&mmc0 { |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&mmc0_pins>; |
|
vmmc-supply = <®_dcdc1>; |
|
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ |
|
disable-wp; |
|
bus-width = <4>; |
|
status = "okay"; |
|
}; |
|
|
|
&mmc1 { |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&mmc1_pins>; |
|
vmmc-supply = <®_dldo4>; |
|
vqmmc-supply = <®_eldo1>; |
|
mmc-pwrseq = <&wifi_pwrseq>; |
|
bus-width = <4>; |
|
non-removable; |
|
status = "okay"; |
|
|
|
rtl8723cs: wifi@1 { |
|
reg = <1>; |
|
}; |
|
}; |
|
|
|
&mmc2 { |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>; |
|
vmmc-supply = <®_dcdc1>; |
|
vqmmc-supply = <®_eldo1>; |
|
max-frequency = <200000000>; |
|
bus-width = <8>; |
|
non-removable; |
|
cap-mmc-hw-reset; |
|
mmc-hs200-1_8v; |
|
status = "okay"; |
|
}; |
|
|
|
&ohci0 { |
|
status = "okay"; |
|
}; |
|
|
|
&ohci1 { |
|
status = "okay"; |
|
}; |
|
|
|
&pio { |
|
vcc-pc-supply = <®_eldo1>; |
|
vcc-pd-supply = <®_dcdc1>; |
|
vcc-pe-supply = <®_aldo1>; |
|
vcc-pg-supply = <®_eldo1>; |
|
}; |
|
|
|
&pwm { |
|
status = "okay"; |
|
}; |
|
|
|
&r_i2c { |
|
clock-frequency = <100000>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&r_i2c_pl89_pins>; |
|
status = "okay"; |
|
|
|
anx6345: anx6345@38 { |
|
compatible = "analogix,anx6345"; |
|
reg = <0x38>; |
|
reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ |
|
dvdd25-supply = <®_dldo2>; |
|
dvdd12-supply = <®_fldo1>; |
|
|
|
ports { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
anx6345_in: port@0 { |
|
reg = <0>; |
|
anx6345_in_tcon0: endpoint { |
|
remote-endpoint = <&tcon0_out_anx6345>; |
|
}; |
|
}; |
|
|
|
anx6345_out: port@1 { |
|
reg = <1>; |
|
anx6345_out_edp: endpoint { |
|
remote-endpoint = <&panel_edp_in>; |
|
}; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
&r_pio { |
|
/* |
|
* FIXME: We can't add that supply for now since it would |
|
* create a circular dependency between pinctrl, the regulator |
|
* and the RSB Bus. |
|
* |
|
* vcc-pl-supply = <®_aldo2>; |
|
*/ |
|
}; |
|
|
|
&r_rsb { |
|
status = "okay"; |
|
|
|
axp803: pmic@3a3 { |
|
compatible = "x-powers,axp803"; |
|
reg = <0x3a3>; |
|
interrupt-parent = <&r_intc>; |
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
|
}; |
|
}; |
|
|
|
#include "axp803.dtsi" |
|
|
|
&ac_power_supply { |
|
status = "okay"; |
|
}; |
|
|
|
&battery_power_supply { |
|
status = "okay"; |
|
}; |
|
|
|
®_aldo1 { |
|
regulator-name = "vcc-pe"; |
|
}; |
|
|
|
®_aldo2 { |
|
regulator-always-on; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <3300000>; |
|
regulator-name = "vcc-pl"; |
|
}; |
|
|
|
®_aldo3 { |
|
regulator-always-on; |
|
regulator-min-microvolt = <2700000>; |
|
regulator-max-microvolt = <3300000>; |
|
regulator-name = "vcc-pll-avcc"; |
|
}; |
|
|
|
®_dc1sw { |
|
regulator-name = "vcc-lcd"; |
|
}; |
|
|
|
®_dcdc1 { |
|
regulator-always-on; |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
regulator-name = "vcc-3v3"; |
|
}; |
|
|
|
®_dcdc2 { |
|
regulator-always-on; |
|
regulator-min-microvolt = <1000000>; |
|
regulator-max-microvolt = <1300000>; |
|
regulator-name = "vdd-cpux"; |
|
}; |
|
|
|
/* DCDC3 is polyphased with DCDC2 */ |
|
|
|
®_dcdc5 { |
|
regulator-always-on; |
|
regulator-min-microvolt = <1200000>; |
|
regulator-max-microvolt = <1200000>; |
|
regulator-name = "vcc-dram"; |
|
}; |
|
|
|
®_dcdc6 { |
|
regulator-always-on; |
|
regulator-min-microvolt = <1100000>; |
|
regulator-max-microvolt = <1100000>; |
|
regulator-name = "vdd-sys"; |
|
}; |
|
|
|
®_dldo1 { |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
regulator-name = "vcc-hdmi"; |
|
}; |
|
|
|
®_dldo2 { |
|
regulator-min-microvolt = <2500000>; |
|
regulator-max-microvolt = <2500000>; |
|
regulator-name = "vcc-edp"; |
|
}; |
|
|
|
®_dldo4 { |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
regulator-name = "vcc-wifi"; |
|
}; |
|
|
|
®_eldo1 { |
|
regulator-always-on; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
regulator-name = "cpvdd"; |
|
}; |
|
|
|
®_fldo1 { |
|
regulator-min-microvolt = <1200000>; |
|
regulator-max-microvolt = <1200000>; |
|
regulator-name = "vcc-1v2-hsic"; |
|
}; |
|
|
|
®_fldo2 { |
|
regulator-always-on; |
|
regulator-min-microvolt = <1100000>; |
|
regulator-max-microvolt = <1100000>; |
|
regulator-name = "vdd-cpus"; |
|
}; |
|
|
|
®_rtc_ldo { |
|
regulator-name = "vcc-rtc"; |
|
}; |
|
|
|
&simplefb_lcd { |
|
panel-supply = <®_dc1sw>; |
|
dvdd25-supply = <®_dldo2>; |
|
dvdd12-supply = <®_fldo1>; |
|
}; |
|
|
|
&simplefb_hdmi { |
|
vcc-hdmi-supply = <®_dldo1>; |
|
}; |
|
|
|
&sound { |
|
status = "okay"; |
|
simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; |
|
simple-audio-card,widgets = "Microphone", "Internal Microphone Left", |
|
"Microphone", "Internal Microphone Right", |
|
"Headphone", "Headphone Jack", |
|
"Speaker", "Internal Speaker"; |
|
simple-audio-card,routing = |
|
"Left DAC", "DACL", |
|
"Right DAC", "DACR", |
|
"Speaker Amp INL", "LINEOUT", |
|
"Speaker Amp INR", "LINEOUT", |
|
"Internal Speaker", "Speaker Amp OUTL", |
|
"Internal Speaker", "Speaker Amp OUTR", |
|
"Headphone Jack", "HP", |
|
"ADCL", "Left ADC", |
|
"ADCR", "Right ADC", |
|
"Internal Microphone Left", "MBIAS", |
|
"MIC1", "Internal Microphone Left", |
|
"Internal Microphone Right", "HBIAS", |
|
"MIC2", "Internal Microphone Right"; |
|
}; |
|
|
|
&tcon0 { |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&lcd_rgb666_pins>; |
|
|
|
status = "okay"; |
|
}; |
|
|
|
&tcon0_out { |
|
tcon0_out_anx6345: endpoint { |
|
remote-endpoint = <&anx6345_in_tcon0>; |
|
}; |
|
}; |
|
|
|
&uart0 { |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&uart0_pb_pins>; |
|
status = "okay"; |
|
}; |
|
|
|
&usb_otg { |
|
dr_mode = "host"; |
|
}; |
|
|
|
&usbphy { |
|
usb0_vbus-supply = <®_vcc5v0>; |
|
usb1_vbus-supply = <®_vcc5v0>; |
|
status = "okay"; |
|
};
|
|
|