mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
59 lines
2.0 KiB
59 lines
2.0 KiB
#define BOARD_NAME "STM32 Primer2" |
|
#define BOARD_ID 0x21e5798d |
|
|
|
#define MCU_STM32F1 1 |
|
/* High-density device */ |
|
|
|
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 |
|
#define STM32_PLLMUL_VALUE 6 |
|
#define STM32_HSECLK 12000000 |
|
|
|
#define GPIO_LED_BASE GPIOE_BASE |
|
#define GPIO_LED_SET_TO_EMIT 0 |
|
#define GPIO_USB_BASE GPIOD_BASE |
|
#define GPIO_USB_CLEAR_TO_ENABLE 3 |
|
#define GPIO_OTHER_BASE GPIOA_BASE |
|
|
|
/* |
|
* Port A setup. |
|
* PA0 - input with pull-up. AN0 |
|
* PA1 - input with pull-up. AN1 |
|
* PA8 - Input with pull-down (PBUTTON). |
|
* PA11 - Push Pull output 10MHz 0 default (until USB enabled) (USBDM) |
|
* PA12 - Push Pull output 10MHz 0 default (until USB enabled) (USBDP) |
|
* ------------------------ Default |
|
* PAx - input with pull-up |
|
*/ |
|
#define VAL_GPIO_OTHER_ODR 0xFFFFE6FF |
|
#define VAL_GPIO_OTHER_CRL 0x88888888 /* PA7...PA0 */ |
|
#define VAL_GPIO_OTHER_CRH 0x88811888 /* PA15...PA8 */ |
|
|
|
/* |
|
* Port D setup. |
|
* PD3 - Push pull output 50MHz (USB 1:ON 0:OFF) |
|
* ------------------------ Default |
|
* PDx - input with pull-up |
|
*/ |
|
#define VAL_GPIO_USB_ODR 0xFFFFFFFF |
|
#define VAL_GPIO_USB_CRL 0x88883888 /* PD7...PD0 */ |
|
#define VAL_GPIO_USB_CRH 0x88888888 /* PD15...PD8 */ |
|
|
|
/* |
|
* Port E setup. |
|
* PE0 - Push pull output (LED 1:ON 0:OFF) |
|
* PE1 - Push pull output (LED 1:ON 0:OFF) |
|
* PE3 - Input with pull-down (JOYSTICK L). |
|
* PE4 - Input with pull-down (JOYSTICK R). |
|
* PE5 - Input with pull-down (JOYSTICK U). |
|
* PE6 - Input with pull-down (JOYSTICK D). |
|
* ------------------------ Default |
|
* PEx - input with pull-up |
|
*/ |
|
#define VAL_GPIO_LED_ODR 0xFFFFFF87 |
|
#define VAL_GPIO_LED_CRL 0x88888833 /* PE7...PE0 */ |
|
#define VAL_GPIO_LED_CRH 0x88888888 /* PE15...PE8 */ |
|
|
|
#define RCC_ENR_IOP_EN \ |
|
(RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPDEN | RCC_APB2ENR_IOPEEN) |
|
#define RCC_RSTR_IOP_RST \ |
|
(RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPDRST | RCC_APB2RSTR_IOPERST)
|
|
|