mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
42 lines
1.5 KiB
42 lines
1.5 KiB
#define BOARD_NAME "Maple Mini" |
|
#define BOARD_ID 0x7a445272 |
|
|
|
#define MCU_STM32F1 1 |
|
#define STM32F10X_MD /* Medium-density device */ |
|
|
|
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 |
|
#define STM32_PLLMUL_VALUE 9 |
|
#define STM32_HSECLK 8000000 |
|
|
|
#define GPIO_LED_BASE GPIOB_BASE |
|
#define GPIO_LED_SET_TO_EMIT 1 |
|
#define GPIO_USB_BASE GPIOB_BASE |
|
#define GPIO_USB_CLEAR_TO_ENABLE 9 |
|
#define GPIO_OTHER_BASE GPIOA_BASE |
|
|
|
/* |
|
* Port A setup. |
|
* PA0 - input with pull-up. AN0 |
|
* PA1 - input with pull-up. AN1 |
|
* PA11 - Push Pull output 10MHz 0 default (until USB enabled) (USBDM) |
|
* PA12 - Push Pull output 10MHz 0 default (until USB enabled) (USBDP) |
|
* ------------------------ Default |
|
* PAx - input with pull-up |
|
*/ |
|
#define VAL_GPIO_OTHER_ODR 0xFFFFE7FF |
|
#define VAL_GPIO_OTHER_CRL 0x88888888 /* PA7...PA0 */ |
|
#define VAL_GPIO_OTHER_CRH 0x88811888 /* PA15...PA8 */ |
|
|
|
/* |
|
* Port B setup. |
|
* PB1 - Push pull output 50MHz (LED 1:ON 0:OFF) |
|
* PB9 - Push pull output 50MHz (USB 1:ON 0:OFF) |
|
* ------------------------ Default |
|
* PBx - input with pull-up |
|
*/ |
|
#define VAL_GPIO_LED_ODR 0xFFFFFFFF |
|
#define VAL_GPIO_LED_CRL 0x88888838 /* PB7...PB0 */ |
|
#define VAL_GPIO_LED_CRH 0x88888838 /* PB15...PB8 */ |
|
|
|
#define RCC_ENR_IOP_EN (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN) |
|
#define RCC_RSTR_IOP_RST (RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPBRST)
|
|
|