mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
86 lines
3.2 KiB
86 lines
3.2 KiB
#define BOARD_NAME "FST-01G" |
|
#define BOARD_ID 0x8801277f |
|
/* echo -n "FST-01G" | sha256sum | sed -e 's/^.*\(........\) -$/\1/' */ |
|
|
|
#define MCU_STM32F1 1 |
|
#define STM32F10X_MD /* Medium-density device */ |
|
|
|
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 |
|
#define STM32_PLLMUL_VALUE 6 |
|
#define STM32_HSECLK 12000000 |
|
|
|
#define GPIO_LED_BASE GPIOB_BASE |
|
#define GPIO_LED_SET_TO_EMIT 0 |
|
#define GPIO_USB_BASE GPIOA_BASE |
|
#undef GPIO_OTHER_BASE |
|
|
|
/* |
|
* Port A setup. |
|
* PA0 - input with pull-up (TIM2_CH1): AN0 for NeuG |
|
* PA1 - input with pull-down (TIM2_CH2) |
|
* PA2 - input with pull-up (TIM2_CH3) connected to CIR module |
|
* PA3 - input with pull-up: external pin available to user |
|
* PA4 - Push pull output (SPI1_NSS) |
|
* PA5 - Alternate Push pull output (SPI1_SCK) |
|
* PA6 - Alternate Push pull output (SPI1_MISO) |
|
* PA7 - Alternate Push pull output (SPI1_MOSI) |
|
* PA10 - Push pull output 1 default |
|
* (so that binary for FST-01G also works on FST-01) |
|
* PA11 - Push Pull output 10MHz 0 default (until USB enabled) (USBDM) |
|
* PA12 - Push Pull output 10MHz 0 default (until USB enabled) (USBDP) |
|
* ------------------------ Default |
|
* PA8 - input with pull-up. |
|
* PA9 - input with pull-up. |
|
* PA13 - input with pull-up. |
|
* PA14 - input with pull-up. |
|
* PA15 - input with pull-up. |
|
*/ |
|
#define VAL_GPIO_USB_ODR 0xFFFFE7FD |
|
#define VAL_GPIO_USB_CRL 0xBBB38888 /* PA7...PA0 */ |
|
#define VAL_GPIO_USB_CRH 0x88811388 /* PA15...PA8 */ |
|
|
|
/* |
|
* Port B setup. |
|
* PB0 - Push pull output (LED 1:ON 0:OFF) |
|
* PB1 - input with pull-up: AN9 for NeuG |
|
* ------------------------ Default |
|
* PBx - input with pull-up. |
|
*/ |
|
#define VAL_GPIO_LED_ODR 0xFFFFFFFF |
|
#define VAL_GPIO_LED_CRL 0x88888883 /* PA7...PA0 */ |
|
#define VAL_GPIO_LED_CRH 0x88888888 /* PA15...PA8 */ |
|
|
|
#define RCC_ENR_IOP_EN (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN) |
|
#define RCC_RSTR_IOP_RST (RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPBRST) |
|
|
|
/* |
|
* Board specific information other than clock and GPIO initial |
|
* setting should not be in board-*.h, but each driver should include |
|
* information by itself. |
|
* |
|
* Please see NeuG's ADC driver how board specific handling is done. |
|
* |
|
* Given the situation of Chopstx's boards support, which is not that |
|
* huge, this works well. If scalability and flexibility will matter, |
|
* we will need something like device tree in which boot process can |
|
* pass information to application program. |
|
* |
|
* Following constants are here, because experimental CIR driver is |
|
* written before this design decision of Chopstx. |
|
* |
|
* Those will be removed soon, once such an driver will be improved |
|
* in new style. |
|
*/ |
|
#if defined(PINPAD_CIR_SUPPORT) |
|
#define TIMx TIM2 |
|
#define INTR_REQ_TIM TIM2_IRQ |
|
#define AFIO_EXTICR_INDEX 0 |
|
#define AFIO_EXTICR1_EXTIx_Py AFIO_EXTICR1_EXTI2_PA |
|
#define EXTI_PR EXTI_PR_PR2 |
|
#define EXTI_IMR EXTI_IMR_MR2 |
|
#define EXTI_FTSR_TR EXTI_FTSR_TR2 |
|
#define INTR_REQ_EXTI EXTI2_IRQ |
|
#define ENABLE_RCC_APB1 |
|
#define RCC_APBnENR_TIMxEN RCC_APB1ENR_TIM2EN |
|
#define RCC_APBnRSTR_TIMxRST RCC_APB1RSTR_TIM2RST |
|
#endif
|
|
|