mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
307 lines
8.9 KiB
307 lines
8.9 KiB
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ |
|
/* |
|
* This file holds Hub protocol constants and data structures that are |
|
* defined in chapter 11 (Hub Specification) of the USB 2.0 specification. |
|
* |
|
* It is used/shared between the USB core, the HCDs and couple of other USB |
|
* drivers. |
|
*/ |
|
|
|
#ifndef __LINUX_CH11_H |
|
#define __LINUX_CH11_H |
|
|
|
#include <linux/types.h> /* __u8 etc */ |
|
|
|
/* This is arbitrary. |
|
* From USB 2.0 spec Table 11-13, offset 7, a hub can |
|
* have up to 255 ports. The most yet reported is 10. |
|
* |
|
* Current Wireless USB host hardware (Intel i1480 for example) allows |
|
* up to 22 devices to connect. Upcoming hardware might raise that |
|
* limit. Because the arrays need to add a bit for hub status data, we |
|
* use 31, so plus one evens out to four bytes. |
|
*/ |
|
#define USB_MAXCHILDREN 31 |
|
|
|
/* See USB 3.1 spec Table 10-5 */ |
|
#define USB_SS_MAXPORTS 15 |
|
|
|
/* |
|
* Hub request types |
|
*/ |
|
|
|
#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE) |
|
#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER) |
|
|
|
/* |
|
* Port status type for GetPortStatus requests added in USB 3.1 |
|
* See USB 3.1 spec Table 10-12 |
|
*/ |
|
#define HUB_PORT_STATUS 0 |
|
#define HUB_PORT_PD_STATUS 1 |
|
#define HUB_EXT_PORT_STATUS 2 |
|
|
|
/* |
|
* Hub class requests |
|
* See USB 2.0 spec Table 11-16 |
|
*/ |
|
#define HUB_CLEAR_TT_BUFFER 8 |
|
#define HUB_RESET_TT 9 |
|
#define HUB_GET_TT_STATE 10 |
|
#define HUB_STOP_TT 11 |
|
|
|
/* |
|
* Hub class additional requests defined by USB 3.0 spec |
|
* See USB 3.0 spec Table 10-6 |
|
*/ |
|
#define HUB_SET_DEPTH 12 |
|
#define HUB_GET_PORT_ERR_COUNT 13 |
|
|
|
/* |
|
* Hub Class feature numbers |
|
* See USB 2.0 spec Table 11-17 |
|
*/ |
|
#define C_HUB_LOCAL_POWER 0 |
|
#define C_HUB_OVER_CURRENT 1 |
|
|
|
/* |
|
* Port feature numbers |
|
* See USB 2.0 spec Table 11-17 |
|
*/ |
|
#define USB_PORT_FEAT_CONNECTION 0 |
|
#define USB_PORT_FEAT_ENABLE 1 |
|
#define USB_PORT_FEAT_SUSPEND 2 /* L2 suspend */ |
|
#define USB_PORT_FEAT_OVER_CURRENT 3 |
|
#define USB_PORT_FEAT_RESET 4 |
|
#define USB_PORT_FEAT_L1 5 /* L1 suspend */ |
|
#define USB_PORT_FEAT_POWER 8 |
|
#define USB_PORT_FEAT_LOWSPEED 9 /* Should never be used */ |
|
#define USB_PORT_FEAT_C_CONNECTION 16 |
|
#define USB_PORT_FEAT_C_ENABLE 17 |
|
#define USB_PORT_FEAT_C_SUSPEND 18 |
|
#define USB_PORT_FEAT_C_OVER_CURRENT 19 |
|
#define USB_PORT_FEAT_C_RESET 20 |
|
#define USB_PORT_FEAT_TEST 21 |
|
#define USB_PORT_FEAT_INDICATOR 22 |
|
#define USB_PORT_FEAT_C_PORT_L1 23 |
|
|
|
/* |
|
* Port feature selectors added by USB 3.0 spec. |
|
* See USB 3.0 spec Table 10-7 |
|
*/ |
|
#define USB_PORT_FEAT_LINK_STATE 5 |
|
#define USB_PORT_FEAT_U1_TIMEOUT 23 |
|
#define USB_PORT_FEAT_U2_TIMEOUT 24 |
|
#define USB_PORT_FEAT_C_PORT_LINK_STATE 25 |
|
#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26 |
|
#define USB_PORT_FEAT_REMOTE_WAKE_MASK 27 |
|
#define USB_PORT_FEAT_BH_PORT_RESET 28 |
|
#define USB_PORT_FEAT_C_BH_PORT_RESET 29 |
|
#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30 |
|
|
|
#define USB_PORT_LPM_TIMEOUT(p) (((p) & 0xff) << 8) |
|
|
|
/* USB 3.0 hub remote wake mask bits, see table 10-14 */ |
|
#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8) |
|
#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9) |
|
#define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT (1 << 10) |
|
|
|
/* |
|
* Hub Status and Hub Change results |
|
* See USB 2.0 spec Table 11-19 and Table 11-20 |
|
* USB 3.1 extends the port status request and may return 4 additional bytes. |
|
* See USB 3.1 spec section 10.16.2.6 Table 10-12 and 10-15 |
|
*/ |
|
struct usb_port_status { |
|
__le16 wPortStatus; |
|
__le16 wPortChange; |
|
__le32 dwExtPortStatus; |
|
} __attribute__ ((packed)); |
|
|
|
/* |
|
* wPortStatus bit field |
|
* See USB 2.0 spec Table 11-21 |
|
*/ |
|
#define USB_PORT_STAT_CONNECTION 0x0001 |
|
#define USB_PORT_STAT_ENABLE 0x0002 |
|
#define USB_PORT_STAT_SUSPEND 0x0004 |
|
#define USB_PORT_STAT_OVERCURRENT 0x0008 |
|
#define USB_PORT_STAT_RESET 0x0010 |
|
#define USB_PORT_STAT_L1 0x0020 |
|
/* bits 6 to 7 are reserved */ |
|
#define USB_PORT_STAT_POWER 0x0100 |
|
#define USB_PORT_STAT_LOW_SPEED 0x0200 |
|
#define USB_PORT_STAT_HIGH_SPEED 0x0400 |
|
#define USB_PORT_STAT_TEST 0x0800 |
|
#define USB_PORT_STAT_INDICATOR 0x1000 |
|
/* bits 13 to 15 are reserved */ |
|
|
|
/* |
|
* Additions to wPortStatus bit field from USB 3.0 |
|
* See USB 3.0 spec Table 10-10 |
|
*/ |
|
#define USB_PORT_STAT_LINK_STATE 0x01e0 |
|
#define USB_SS_PORT_STAT_POWER 0x0200 |
|
#define USB_SS_PORT_STAT_SPEED 0x1c00 |
|
#define USB_PORT_STAT_SPEED_5GBPS 0x0000 |
|
/* Valid only if port is enabled */ |
|
/* Bits that are the same from USB 2.0 */ |
|
#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION | \ |
|
USB_PORT_STAT_ENABLE | \ |
|
USB_PORT_STAT_OVERCURRENT | \ |
|
USB_PORT_STAT_RESET) |
|
|
|
/* |
|
* Definitions for PORT_LINK_STATE values |
|
* (bits 5-8) in wPortStatus |
|
*/ |
|
#define USB_SS_PORT_LS_U0 0x0000 |
|
#define USB_SS_PORT_LS_U1 0x0020 |
|
#define USB_SS_PORT_LS_U2 0x0040 |
|
#define USB_SS_PORT_LS_U3 0x0060 |
|
#define USB_SS_PORT_LS_SS_DISABLED 0x0080 |
|
#define USB_SS_PORT_LS_RX_DETECT 0x00a0 |
|
#define USB_SS_PORT_LS_SS_INACTIVE 0x00c0 |
|
#define USB_SS_PORT_LS_POLLING 0x00e0 |
|
#define USB_SS_PORT_LS_RECOVERY 0x0100 |
|
#define USB_SS_PORT_LS_HOT_RESET 0x0120 |
|
#define USB_SS_PORT_LS_COMP_MOD 0x0140 |
|
#define USB_SS_PORT_LS_LOOPBACK 0x0160 |
|
|
|
/* |
|
* wPortChange bit field |
|
* See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10 |
|
* Bits 0 to 5 shown, bits 6 to 15 are reserved |
|
*/ |
|
#define USB_PORT_STAT_C_CONNECTION 0x0001 |
|
#define USB_PORT_STAT_C_ENABLE 0x0002 |
|
#define USB_PORT_STAT_C_SUSPEND 0x0004 |
|
#define USB_PORT_STAT_C_OVERCURRENT 0x0008 |
|
#define USB_PORT_STAT_C_RESET 0x0010 |
|
#define USB_PORT_STAT_C_L1 0x0020 |
|
/* |
|
* USB 3.0 wPortChange bit fields |
|
* See USB 3.0 spec Table 10-11 |
|
*/ |
|
#define USB_PORT_STAT_C_BH_RESET 0x0020 |
|
#define USB_PORT_STAT_C_LINK_STATE 0x0040 |
|
#define USB_PORT_STAT_C_CONFIG_ERROR 0x0080 |
|
|
|
/* |
|
* USB 3.1 dwExtPortStatus field masks |
|
* See USB 3.1 spec 10.16.2.6.3 Table 10-15 |
|
*/ |
|
|
|
#define USB_EXT_PORT_STAT_RX_SPEED_ID 0x0000000f |
|
#define USB_EXT_PORT_STAT_TX_SPEED_ID 0x000000f0 |
|
#define USB_EXT_PORT_STAT_RX_LANES 0x00000f00 |
|
#define USB_EXT_PORT_STAT_TX_LANES 0x0000f000 |
|
|
|
#define USB_EXT_PORT_RX_LANES(p) \ |
|
(((p) & USB_EXT_PORT_STAT_RX_LANES) >> 8) |
|
#define USB_EXT_PORT_TX_LANES(p) \ |
|
(((p) & USB_EXT_PORT_STAT_TX_LANES) >> 12) |
|
|
|
/* |
|
* wHubCharacteristics (masks) |
|
* See USB 2.0 spec Table 11-13, offset 3 |
|
*/ |
|
#define HUB_CHAR_LPSM 0x0003 /* Logical Power Switching Mode mask */ |
|
#define HUB_CHAR_COMMON_LPSM 0x0000 /* All ports power control at once */ |
|
#define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */ |
|
#define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */ |
|
|
|
#define HUB_CHAR_COMPOUND 0x0004 /* hub is part of a compound device */ |
|
|
|
#define HUB_CHAR_OCPM 0x0018 /* Over-Current Protection Mode mask */ |
|
#define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */ |
|
#define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */ |
|
#define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */ |
|
|
|
#define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */ |
|
#define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */ |
|
|
|
struct usb_hub_status { |
|
__le16 wHubStatus; |
|
__le16 wHubChange; |
|
} __attribute__ ((packed)); |
|
|
|
/* |
|
* Hub Status & Hub Change bit masks |
|
* See USB 2.0 spec Table 11-19 and Table 11-20 |
|
* Bits 0 and 1 for wHubStatus and wHubChange |
|
* Bits 2 to 15 are reserved for both |
|
*/ |
|
#define HUB_STATUS_LOCAL_POWER 0x0001 |
|
#define HUB_STATUS_OVERCURRENT 0x0002 |
|
#define HUB_CHANGE_LOCAL_POWER 0x0001 |
|
#define HUB_CHANGE_OVERCURRENT 0x0002 |
|
|
|
|
|
/* |
|
* Hub descriptor |
|
* See USB 2.0 spec Table 11-13 |
|
*/ |
|
|
|
#define USB_DT_HUB (USB_TYPE_CLASS | 0x09) |
|
#define USB_DT_SS_HUB (USB_TYPE_CLASS | 0x0a) |
|
#define USB_DT_HUB_NONVAR_SIZE 7 |
|
#define USB_DT_SS_HUB_SIZE 12 |
|
|
|
/* |
|
* Hub Device descriptor |
|
* USB Hub class device protocols |
|
*/ |
|
|
|
#define USB_HUB_PR_FS 0 /* Full speed hub */ |
|
#define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */ |
|
#define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */ |
|
#define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */ |
|
#define USB_HUB_PR_SS 3 /* Super speed hub */ |
|
|
|
struct usb_hub_descriptor { |
|
__u8 bDescLength; |
|
__u8 bDescriptorType; |
|
__u8 bNbrPorts; |
|
__le16 wHubCharacteristics; |
|
__u8 bPwrOn2PwrGood; |
|
__u8 bHubContrCurrent; |
|
|
|
/* 2.0 and 3.0 hubs differ here */ |
|
union { |
|
struct { |
|
/* add 1 bit for hub status change; round to bytes */ |
|
__u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8]; |
|
__u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8]; |
|
} __attribute__ ((packed)) hs; |
|
|
|
struct { |
|
__u8 bHubHdrDecLat; |
|
__le16 wHubDelay; |
|
__le16 DeviceRemovable; |
|
} __attribute__ ((packed)) ss; |
|
} u; |
|
} __attribute__ ((packed)); |
|
|
|
/* port indicator status selectors, tables 11-7 and 11-25 */ |
|
#define HUB_LED_AUTO 0 |
|
#define HUB_LED_AMBER 1 |
|
#define HUB_LED_GREEN 2 |
|
#define HUB_LED_OFF 3 |
|
|
|
enum hub_led_mode { |
|
INDICATOR_AUTO = 0, |
|
INDICATOR_CYCLE, |
|
/* software blinks for attention: software, hardware, reserved */ |
|
INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF, |
|
INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF, |
|
INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF |
|
} __attribute__ ((packed)); |
|
|
|
/* Transaction Translator Think Times, in bits */ |
|
#define HUB_TTTT_8_BITS 0x00 |
|
#define HUB_TTTT_16_BITS 0x20 |
|
#define HUB_TTTT_24_BITS 0x40 |
|
#define HUB_TTTT_32_BITS 0x60 |
|
|
|
#endif /* __LINUX_CH11_H */
|
|
|