mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1040 lines
32 KiB
1040 lines
32 KiB
# SPDX-License-Identifier: GPL-2.0-only |
|
# |
|
# SPI driver configuration |
|
# |
|
menuconfig SPI |
|
bool "SPI support" |
|
depends on HAS_IOMEM |
|
help |
|
The "Serial Peripheral Interface" is a low level synchronous |
|
protocol. Chips that support SPI can have data transfer rates |
|
up to several tens of Mbit/sec. Chips are addressed with a |
|
controller and a chipselect. Most SPI slaves don't support |
|
dynamic device discovery; some are even write-only or read-only. |
|
|
|
SPI is widely used by microcontrollers to talk with sensors, |
|
eeprom and flash memory, codecs and various other controller |
|
chips, analog to digital (and d-to-a) converters, and more. |
|
MMC and SD cards can be accessed using SPI protocol; and for |
|
DataFlash cards used in MMC sockets, SPI must always be used. |
|
|
|
SPI is one of a family of similar protocols using a four wire |
|
interface (select, clock, data in, data out) including Microwire |
|
(half duplex), SSP, SSI, and PSP. This driver framework should |
|
work with most such devices and controllers. |
|
|
|
if SPI |
|
|
|
config SPI_DEBUG |
|
bool "Debug support for SPI drivers" |
|
depends on DEBUG_KERNEL |
|
help |
|
Say "yes" to enable debug messaging (like dev_dbg and pr_debug), |
|
sysfs, and debugfs support in SPI controller and protocol drivers. |
|
|
|
# |
|
# MASTER side ... talking to discrete SPI slave chips including microcontrollers |
|
# |
|
|
|
config SPI_MASTER |
|
# bool "SPI Master Support" |
|
bool |
|
default SPI |
|
help |
|
If your system has an master-capable SPI controller (which |
|
provides the clock and chipselect), you can enable that |
|
controller and the protocol drivers for the SPI slave chips |
|
that are connected. |
|
|
|
if SPI_MASTER |
|
|
|
config SPI_MEM |
|
bool "SPI memory extension" |
|
help |
|
Enable this option if you want to enable the SPI memory extension. |
|
This extension is meant to simplify interaction with SPI memories |
|
by providing a high-level interface to send memory-like commands. |
|
|
|
comment "SPI Master Controller Drivers" |
|
|
|
config SPI_ALTERA |
|
tristate "Altera SPI Controller" |
|
select REGMAP_MMIO |
|
help |
|
This is the driver for the Altera SPI Controller. |
|
|
|
config SPI_AR934X |
|
tristate "Qualcomm Atheros AR934X/QCA95XX SPI controller driver" |
|
depends on ATH79 || COMPILE_TEST |
|
help |
|
This enables support for the SPI controller present on the |
|
Qualcomm Atheros AR934X/QCA95XX SoCs. |
|
|
|
config SPI_ATH79 |
|
tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver" |
|
depends on ATH79 || COMPILE_TEST |
|
select SPI_BITBANG |
|
help |
|
This enables support for the SPI controller present on the |
|
Atheros AR71XX/AR724X/AR913X SoCs. |
|
|
|
config SPI_ARMADA_3700 |
|
tristate "Marvell Armada 3700 SPI Controller" |
|
depends on (ARCH_MVEBU && OF) || COMPILE_TEST |
|
help |
|
This enables support for the SPI controller present on the |
|
Marvell Armada 3700 SoCs. |
|
|
|
config SPI_ATMEL |
|
tristate "Atmel SPI Controller" |
|
depends on ARCH_AT91 || COMPILE_TEST |
|
depends on OF |
|
help |
|
This selects a driver for the Atmel SPI Controller, present on |
|
many AT91 ARM chips. |
|
|
|
config SPI_AT91_USART |
|
tristate "Atmel USART Controller SPI driver" |
|
depends on (ARCH_AT91 || COMPILE_TEST) |
|
depends on MFD_AT91_USART |
|
help |
|
This selects a driver for the AT91 USART Controller as SPI Master, |
|
present on AT91 and SAMA5 SoC series. |
|
|
|
config SPI_ATMEL_QUADSPI |
|
tristate "Atmel Quad SPI Controller" |
|
depends on ARCH_AT91 || COMPILE_TEST |
|
depends on OF && HAS_IOMEM |
|
help |
|
This enables support for the Quad SPI controller in master mode. |
|
This driver does not support generic SPI. The implementation only |
|
supports spi-mem interface. |
|
|
|
config SPI_AU1550 |
|
tristate "Au1550/Au1200/Au1300 SPI Controller" |
|
depends on MIPS_ALCHEMY |
|
select SPI_BITBANG |
|
help |
|
If you say yes to this option, support will be included for the |
|
PSC SPI controller found on Au1550, Au1200 and Au1300 series. |
|
|
|
config SPI_AXI_SPI_ENGINE |
|
tristate "Analog Devices AXI SPI Engine controller" |
|
depends on HAS_IOMEM |
|
help |
|
This enables support for the Analog Devices AXI SPI Engine SPI controller. |
|
It is part of the SPI Engine framework that is used in some Analog Devices |
|
reference designs for FPGAs. |
|
|
|
config SPI_BCM2835 |
|
tristate "BCM2835 SPI controller" |
|
depends on GPIOLIB |
|
depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST |
|
help |
|
This selects a driver for the Broadcom BCM2835 SPI master. |
|
|
|
The BCM2835 contains two types of SPI master controller; the |
|
"universal SPI master", and the regular SPI controller. This driver |
|
is for the regular SPI controller. Slave mode operation is not also |
|
not supported. |
|
|
|
config SPI_BCM2835AUX |
|
tristate "BCM2835 SPI auxiliary controller" |
|
depends on ((ARCH_BCM2835 || ARCH_BRCMSTB) && GPIOLIB) || COMPILE_TEST |
|
help |
|
This selects a driver for the Broadcom BCM2835 SPI aux master. |
|
|
|
The BCM2835 contains two types of SPI master controller; the |
|
"universal SPI master", and the regular SPI controller. |
|
This driver is for the universal/auxiliary SPI controller. |
|
|
|
config SPI_BCM63XX |
|
tristate "Broadcom BCM63xx SPI controller" |
|
depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST |
|
help |
|
Enable support for the SPI controller on the Broadcom BCM63xx SoCs. |
|
|
|
config SPI_BCM63XX_HSSPI |
|
tristate "Broadcom BCM63XX HS SPI controller driver" |
|
depends on BCM63XX || BMIPS_GENERIC || ARCH_BCM_63XX || COMPILE_TEST |
|
help |
|
This enables support for the High Speed SPI controller present on |
|
newer Broadcom BCM63XX SoCs. |
|
|
|
config SPI_BCM_QSPI |
|
tristate "Broadcom BSPI and MSPI controller support" |
|
depends on ARCH_BRCMSTB || ARCH_BCM || ARCH_BCM_IPROC || \ |
|
BMIPS_GENERIC || COMPILE_TEST |
|
default ARCH_BCM_IPROC |
|
help |
|
Enables support for the Broadcom SPI flash and MSPI controller. |
|
Select this option for any one of BRCMSTB, iProc NSP and NS2 SoCs |
|
based platforms. This driver works for both SPI master for SPI NOR |
|
flash device as well as MSPI device. |
|
|
|
config SPI_BITBANG |
|
tristate "Utilities for Bitbanging SPI masters" |
|
help |
|
With a few GPIO pins, your system can bitbang the SPI protocol. |
|
Select this to get SPI support through I/O pins (GPIO, parallel |
|
port, etc). Or, some systems' SPI master controller drivers use |
|
this code to manage the per-word or per-transfer accesses to the |
|
hardware shift registers. |
|
|
|
This is library code, and is automatically selected by drivers that |
|
need it. You only need to select this explicitly to support driver |
|
modules that aren't part of this kernel tree. |
|
|
|
config SPI_BUTTERFLY |
|
tristate "Parallel port adapter for AVR Butterfly (DEVELOPMENT)" |
|
depends on PARPORT |
|
select SPI_BITBANG |
|
help |
|
This uses a custom parallel port cable to connect to an AVR |
|
Butterfly <http://www.atmel.com/products/avr/butterfly>, an |
|
inexpensive battery powered microcontroller evaluation board. |
|
This same cable can be used to flash new firmware. |
|
|
|
config SPI_CADENCE |
|
tristate "Cadence SPI controller" |
|
help |
|
This selects the Cadence SPI controller master driver |
|
used by Xilinx Zynq and ZynqMP. |
|
|
|
config SPI_CADENCE_QUADSPI |
|
tristate "Cadence Quad SPI controller" |
|
depends on OF && (ARM || ARM64 || X86 || COMPILE_TEST) |
|
help |
|
Enable support for the Cadence Quad SPI Flash controller. |
|
|
|
Cadence QSPI is a specialized controller for connecting an SPI |
|
Flash over 1/2/4-bit wide bus. Enable this option if you have a |
|
device with a Cadence QSPI controller and want to access the |
|
Flash as an MTD device. |
|
|
|
config SPI_CLPS711X |
|
tristate "CLPS711X host SPI controller" |
|
depends on ARCH_CLPS711X || COMPILE_TEST |
|
help |
|
This enables dedicated general purpose SPI/Microwire1-compatible |
|
master mode interface (SSI1) for CLPS711X-based CPUs. |
|
|
|
config SPI_COLDFIRE_QSPI |
|
tristate "Freescale Coldfire QSPI controller" |
|
depends on (M520x || M523x || M5249 || M525x || M527x || M528x || M532x) |
|
help |
|
This enables support for the Coldfire QSPI controller in master |
|
mode. |
|
|
|
config SPI_DAVINCI |
|
tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller" |
|
depends on ARCH_DAVINCI || ARCH_KEYSTONE |
|
select SPI_BITBANG |
|
help |
|
SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules. |
|
|
|
config SPI_DESIGNWARE |
|
tristate "DesignWare SPI controller core support" |
|
imply SPI_MEM |
|
help |
|
general driver for SPI controller core from DesignWare |
|
|
|
if SPI_DESIGNWARE |
|
|
|
config SPI_DW_DMA |
|
bool "DMA support for DW SPI controller" |
|
|
|
config SPI_DW_PCI |
|
tristate "PCI interface driver for DW SPI core" |
|
depends on PCI |
|
|
|
config SPI_DW_MMIO |
|
tristate "Memory-mapped io interface driver for DW SPI core" |
|
depends on HAS_IOMEM |
|
|
|
config SPI_DW_BT1 |
|
tristate "Baikal-T1 SPI driver for DW SPI core" |
|
depends on MIPS_BAIKAL_T1 || COMPILE_TEST |
|
select MULTIPLEXER |
|
select MUX_MMIO |
|
help |
|
Baikal-T1 SoC is equipped with three DW APB SSI-based MMIO SPI |
|
controllers. Two of them are pretty much normal: with IRQ, DMA, |
|
FIFOs of 64 words depth, 4x CSs, but the third one as being a |
|
part of the Baikal-T1 System Boot Controller has got a very |
|
limited resources: no IRQ, no DMA, only a single native |
|
chip-select and Tx/Rx FIFO with just 8 words depth available. |
|
The later one is normally connected to an external SPI-nor flash |
|
of 128Mb (in general can be of bigger size). |
|
|
|
config SPI_DW_BT1_DIRMAP |
|
bool "Directly mapped Baikal-T1 Boot SPI flash support" |
|
depends on SPI_DW_BT1 |
|
help |
|
Directly mapped SPI flash memory is an interface specific to the |
|
Baikal-T1 System Boot Controller. It is a 16MB MMIO region, which |
|
can be used to access a peripheral memory device just by |
|
reading/writing data from/to it. Note that the system APB bus |
|
will stall during each IO from/to the dirmap region until the |
|
operation is finished. So try not to use it concurrently with |
|
time-critical tasks (like the SPI memory operations implemented |
|
in this driver). |
|
|
|
endif |
|
|
|
config SPI_DLN2 |
|
tristate "Diolan DLN-2 USB SPI adapter" |
|
depends on MFD_DLN2 |
|
help |
|
If you say yes to this option, support will be included for Diolan |
|
DLN2, a USB to SPI interface. |
|
|
|
This driver can also be built as a module. If so, the module |
|
will be called spi-dln2. |
|
|
|
config SPI_EP93XX |
|
tristate "Cirrus Logic EP93xx SPI controller" |
|
depends on ARCH_EP93XX || COMPILE_TEST |
|
help |
|
This enables using the Cirrus EP93xx SPI controller in master |
|
mode. |
|
|
|
config SPI_FALCON |
|
bool "Falcon SPI controller support" |
|
depends on SOC_FALCON |
|
help |
|
The external bus unit (EBU) found on the FALC-ON SoC has SPI |
|
emulation that is designed for serial flash access. This driver |
|
has only been tested with m25p80 type chips. The hardware has no |
|
support for other types of SPI peripherals. |
|
|
|
config SPI_FSI |
|
tristate "FSI SPI driver" |
|
depends on FSI |
|
help |
|
This enables support for the driver for FSI bus attached SPI |
|
controllers. |
|
|
|
config SPI_FSL_LPSPI |
|
tristate "Freescale i.MX LPSPI controller" |
|
depends on ARCH_MXC || COMPILE_TEST |
|
help |
|
This enables Freescale i.MX LPSPI controllers in master mode. |
|
|
|
config SPI_FSL_QUADSPI |
|
tristate "Freescale QSPI controller" |
|
depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST |
|
depends on HAS_IOMEM |
|
help |
|
This enables support for the Quad SPI controller in master mode. |
|
Up to four flash chips can be connected on two buses with two |
|
chipselects each. |
|
This controller does not support generic SPI messages. It only |
|
supports the high-level SPI memory interface. |
|
|
|
config SPI_HISI_SFC_V3XX |
|
tristate "HiSilicon SPI NOR Flash Controller for Hi16XX chipsets" |
|
depends on (ARM64 && ACPI) || COMPILE_TEST |
|
depends on HAS_IOMEM |
|
help |
|
This enables support for HiSilicon v3xx SPI NOR flash controller |
|
found in hi16xx chipsets. |
|
|
|
config SPI_NXP_FLEXSPI |
|
tristate "NXP Flex SPI controller" |
|
depends on ARCH_LAYERSCAPE || HAS_IOMEM |
|
help |
|
This enables support for the Flex SPI controller in master mode. |
|
Up to four slave devices can be connected on two buses with two |
|
chipselects each. |
|
This controller does not support generic SPI messages and only |
|
supports the high-level SPI memory interface. |
|
|
|
config SPI_GPIO |
|
tristate "GPIO-based bitbanging SPI Master" |
|
depends on GPIOLIB || COMPILE_TEST |
|
select SPI_BITBANG |
|
help |
|
This simple GPIO bitbanging SPI master uses the arch-neutral GPIO |
|
interface to manage MOSI, MISO, SCK, and chipselect signals. SPI |
|
slaves connected to a bus using this driver are configured as usual, |
|
except that the spi_board_info.controller_data holds the GPIO number |
|
for the chipselect used by this controller driver. |
|
|
|
Note that this driver often won't achieve even 1 Mbit/sec speeds, |
|
making it unusually slow for SPI. If your platform can inline |
|
GPIO operations, you should be able to leverage that for better |
|
speed with a custom version of this driver; see the source code. |
|
|
|
config SPI_IMG_SPFI |
|
tristate "IMG SPFI controller" |
|
depends on MIPS || COMPILE_TEST |
|
help |
|
This enables support for the SPFI master controller found on |
|
IMG SoCs. |
|
|
|
config SPI_IMX |
|
tristate "Freescale i.MX SPI controllers" |
|
depends on ARCH_MXC || COMPILE_TEST |
|
select SPI_BITBANG |
|
help |
|
This enables support for the Freescale i.MX SPI controllers. |
|
|
|
config SPI_JCORE |
|
tristate "J-Core SPI Master" |
|
depends on OF && (SUPERH || COMPILE_TEST) |
|
help |
|
This enables support for the SPI master controller in the J-Core |
|
synthesizable, open source SoC. |
|
|
|
config SPI_LM70_LLP |
|
tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)" |
|
depends on PARPORT |
|
select SPI_BITBANG |
|
help |
|
This driver supports the NS LM70 LLP Evaluation Board, |
|
which interfaces to an LM70 temperature sensor using |
|
a parallel port. |
|
|
|
config SPI_LP8841_RTC |
|
tristate "ICP DAS LP-8841 SPI Controller for RTC" |
|
depends on MACH_PXA27X_DT || COMPILE_TEST |
|
help |
|
This driver provides an SPI master device to drive Maxim |
|
DS-1302 real time clock. |
|
|
|
Say N here unless you plan to run the kernel on an ICP DAS |
|
LP-8x4x industrial computer. |
|
|
|
config SPI_MPC52xx |
|
tristate "Freescale MPC52xx SPI (non-PSC) controller support" |
|
depends on PPC_MPC52xx |
|
help |
|
This drivers supports the MPC52xx SPI controller in master SPI |
|
mode. |
|
|
|
config SPI_MPC52xx_PSC |
|
tristate "Freescale MPC52xx PSC SPI controller" |
|
depends on PPC_MPC52xx |
|
help |
|
This enables using the Freescale MPC52xx Programmable Serial |
|
Controller in master SPI mode. |
|
|
|
config SPI_MPC512x_PSC |
|
tristate "Freescale MPC512x PSC SPI controller" |
|
depends on PPC_MPC512x |
|
help |
|
This enables using the Freescale MPC5121 Programmable Serial |
|
Controller in SPI master mode. |
|
|
|
config SPI_FSL_LIB |
|
tristate |
|
depends on OF |
|
|
|
config SPI_FSL_CPM |
|
tristate |
|
depends on FSL_SOC |
|
|
|
config SPI_FSL_SPI |
|
tristate "Freescale SPI controller and Aeroflex Gaisler GRLIB SPI controller" |
|
depends on OF |
|
select SPI_FSL_LIB |
|
select SPI_FSL_CPM if FSL_SOC |
|
help |
|
This enables using the Freescale SPI controllers in master mode. |
|
MPC83xx platform uses the controller in cpu mode or CPM/QE mode. |
|
MPC8569 uses the controller in QE mode, MPC8610 in cpu mode. |
|
This also enables using the Aeroflex Gaisler GRLIB SPI controller in |
|
master mode. |
|
|
|
config SPI_FSL_DSPI |
|
tristate "Freescale DSPI controller" |
|
select REGMAP_MMIO |
|
depends on SOC_VF610 || SOC_LS1021A || ARCH_LAYERSCAPE || M5441x || COMPILE_TEST |
|
help |
|
This enables support for the Freescale DSPI controller in master |
|
mode. VF610, LS1021A and ColdFire platforms uses the controller. |
|
|
|
config SPI_FSL_ESPI |
|
tristate "Freescale eSPI controller" |
|
depends on FSL_SOC |
|
help |
|
This enables using the Freescale eSPI controllers in master mode. |
|
From MPC8536, 85xx platform uses the controller, and all P10xx, |
|
P20xx, P30xx,P40xx, P50xx uses this controller. |
|
|
|
config SPI_MESON_SPICC |
|
tristate "Amlogic Meson SPICC controller" |
|
depends on COMMON_CLK |
|
depends on ARCH_MESON || COMPILE_TEST |
|
help |
|
This enables master mode support for the SPICC (SPI communication |
|
controller) available in Amlogic Meson SoCs. |
|
|
|
config SPI_MESON_SPIFC |
|
tristate "Amlogic Meson SPIFC controller" |
|
depends on ARCH_MESON || COMPILE_TEST |
|
select REGMAP_MMIO |
|
help |
|
This enables master mode support for the SPIFC (SPI flash |
|
controller) available in Amlogic Meson SoCs. |
|
|
|
config SPI_MT65XX |
|
tristate "MediaTek SPI controller" |
|
depends on ARCH_MEDIATEK || COMPILE_TEST |
|
help |
|
This selects the MediaTek(R) SPI bus driver. |
|
If you want to use MediaTek(R) SPI interface, |
|
say Y or M here.If you are not sure, say N. |
|
SPI drivers for Mediatek MT65XX and MT81XX series ARM SoCs. |
|
|
|
config SPI_MT7621 |
|
tristate "MediaTek MT7621 SPI Controller" |
|
depends on RALINK || COMPILE_TEST |
|
help |
|
This selects a driver for the MediaTek MT7621 SPI Controller. |
|
|
|
config SPI_MTK_NOR |
|
tristate "MediaTek SPI NOR controller" |
|
depends on ARCH_MEDIATEK || COMPILE_TEST |
|
help |
|
This enables support for SPI NOR controller found on MediaTek |
|
ARM SoCs. This is a controller specifically for SPI NOR flash. |
|
It can perform generic SPI transfers up to 6 bytes via generic |
|
SPI interface as well as several SPI NOR specific instructions |
|
via SPI MEM interface. |
|
|
|
config SPI_NPCM_FIU |
|
tristate "Nuvoton NPCM FLASH Interface Unit" |
|
depends on ARCH_NPCM || COMPILE_TEST |
|
depends on OF && HAS_IOMEM |
|
help |
|
This enables support for the Flash Interface Unit SPI controller |
|
in master mode. |
|
This driver does not support generic SPI. The implementation only |
|
supports spi-mem interface. |
|
|
|
config SPI_NPCM_PSPI |
|
tristate "Nuvoton NPCM PSPI Controller" |
|
depends on ARCH_NPCM || COMPILE_TEST |
|
help |
|
This driver provides support for Nuvoton NPCM BMC |
|
Peripheral SPI controller in master mode. |
|
|
|
config SPI_LANTIQ_SSC |
|
tristate "Lantiq SSC SPI controller" |
|
depends on LANTIQ || X86 || COMPILE_TEST |
|
help |
|
This driver supports the Lantiq SSC SPI controller in master |
|
mode. This controller is found on Intel (former Lantiq) SoCs like |
|
the Danube, Falcon, xRX200, xRX300, Lightning Mountain. |
|
|
|
config SPI_OC_TINY |
|
tristate "OpenCores tiny SPI" |
|
depends on GPIOLIB || COMPILE_TEST |
|
select SPI_BITBANG |
|
help |
|
This is the driver for OpenCores tiny SPI master controller. |
|
|
|
config SPI_OCTEON |
|
tristate "Cavium OCTEON SPI controller" |
|
depends on CAVIUM_OCTEON_SOC |
|
help |
|
SPI host driver for the hardware found on some Cavium OCTEON |
|
SOCs. |
|
|
|
config SPI_OMAP_UWIRE |
|
tristate "OMAP1 MicroWire" |
|
depends on ARCH_OMAP1 |
|
select SPI_BITBANG |
|
help |
|
This hooks up to the MicroWire controller on OMAP1 chips. |
|
|
|
config SPI_OMAP24XX |
|
tristate "McSPI driver for OMAP" |
|
depends on ARCH_OMAP2PLUS || ARCH_K3 || COMPILE_TEST |
|
select SG_SPLIT |
|
help |
|
SPI master controller for OMAP24XX and later Multichannel SPI |
|
(McSPI) modules. |
|
|
|
config SPI_TI_QSPI |
|
tristate "DRA7xxx QSPI controller support" |
|
depends on ARCH_OMAP2PLUS || COMPILE_TEST |
|
help |
|
QSPI master controller for DRA7xxx used for flash devices. |
|
This device supports single, dual and quad read support, while |
|
it only supports single write mode. |
|
|
|
config SPI_OMAP_100K |
|
tristate "OMAP SPI 100K" |
|
depends on ARCH_OMAP850 || ARCH_OMAP730 || COMPILE_TEST |
|
help |
|
OMAP SPI 100K master controller for omap7xx boards. |
|
|
|
config SPI_ORION |
|
tristate "Orion SPI master" |
|
depends on PLAT_ORION || ARCH_MVEBU || COMPILE_TEST |
|
help |
|
This enables using the SPI master controller on the Orion |
|
and MVEBU chips. |
|
|
|
config SPI_PIC32 |
|
tristate "Microchip PIC32 series SPI" |
|
depends on MACH_PIC32 || COMPILE_TEST |
|
help |
|
SPI driver for Microchip PIC32 SPI master controller. |
|
|
|
config SPI_PIC32_SQI |
|
tristate "Microchip PIC32 Quad SPI driver" |
|
depends on MACH_PIC32 || COMPILE_TEST |
|
help |
|
SPI driver for PIC32 Quad SPI controller. |
|
|
|
config SPI_PL022 |
|
tristate "ARM AMBA PL022 SSP controller" |
|
depends on ARM_AMBA |
|
default y if ARCH_REALVIEW |
|
default y if INTEGRATOR_IMPD1 |
|
default y if ARCH_VERSATILE |
|
help |
|
This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP |
|
controller. If you have an embedded system with an AMBA(R) |
|
bus and a PL022 controller, say Y or M here. |
|
|
|
config SPI_PPC4xx |
|
tristate "PPC4xx SPI Controller" |
|
depends on PPC32 && 4xx |
|
select SPI_BITBANG |
|
help |
|
This selects a driver for the PPC4xx SPI Controller. |
|
|
|
config SPI_PXA2XX |
|
tristate "PXA2xx SSP SPI master" |
|
depends on ARCH_PXA || ARCH_MMP || PCI || ACPI || COMPILE_TEST |
|
select PXA_SSP if ARCH_PXA || ARCH_MMP |
|
help |
|
This enables using a PXA2xx or Sodaville SSP port as a SPI master |
|
controller. The driver can be configured to use any SSP port and |
|
additional documentation can be found a Documentation/spi/pxa2xx.rst. |
|
|
|
config SPI_PXA2XX_PCI |
|
def_tristate SPI_PXA2XX && PCI && COMMON_CLK |
|
|
|
config SPI_ROCKCHIP |
|
tristate "Rockchip SPI controller driver" |
|
help |
|
This selects a driver for Rockchip SPI controller. |
|
|
|
If you say yes to this option, support will be included for |
|
RK3066, RK3188 and RK3288 families of SPI controller. |
|
Rockchip SPI controller support DMA transport and PIO mode. |
|
The main usecase of this controller is to use spi flash as boot |
|
device. |
|
|
|
config SPI_RB4XX |
|
tristate "Mikrotik RB4XX SPI master" |
|
depends on SPI_MASTER && ATH79 |
|
help |
|
SPI controller driver for the Mikrotik RB4xx series boards. |
|
|
|
config SPI_RPCIF |
|
tristate "Renesas RPC-IF SPI driver" |
|
depends on RENESAS_RPCIF |
|
help |
|
SPI driver for Renesas R-Car Gen3 or RZ/G2 RPC-IF. |
|
|
|
config SPI_RSPI |
|
tristate "Renesas RSPI/QSPI controller" |
|
depends on SUPERH || ARCH_RENESAS || COMPILE_TEST |
|
help |
|
SPI driver for Renesas RSPI and QSPI blocks. |
|
|
|
config SPI_QCOM_QSPI |
|
tristate "QTI QSPI controller" |
|
depends on ARCH_QCOM |
|
help |
|
QSPI(Quad SPI) driver for Qualcomm QSPI controller. |
|
|
|
config SPI_QUP |
|
tristate "Qualcomm SPI controller with QUP interface" |
|
depends on ARCH_QCOM || COMPILE_TEST |
|
help |
|
Qualcomm Universal Peripheral (QUP) core is an AHB slave that |
|
provides a common data path (an output FIFO and an input FIFO) |
|
for serial peripheral interface (SPI) mini-core. SPI in master |
|
mode supports up to 50MHz, up to four chip selects, programmable |
|
data path from 4 bits to 32 bits and numerous protocol variants. |
|
|
|
This driver can also be built as a module. If so, the module |
|
will be called spi_qup. |
|
|
|
config SPI_QCOM_GENI |
|
tristate "Qualcomm GENI based SPI controller" |
|
depends on QCOM_GENI_SE |
|
help |
|
This driver supports GENI serial engine based SPI controller in |
|
master mode on the Qualcomm Technologies Inc.'s SoCs. If you say |
|
yes to this option, support will be included for the built-in SPI |
|
interface on the Qualcomm Technologies Inc.'s SoCs. |
|
|
|
This driver can also be built as a module. If so, the module |
|
will be called spi-geni-qcom. |
|
|
|
config SPI_S3C24XX |
|
tristate "Samsung S3C24XX series SPI" |
|
depends on ARCH_S3C24XX |
|
select SPI_BITBANG |
|
help |
|
SPI driver for Samsung S3C24XX series ARM SoCs |
|
|
|
config SPI_S3C24XX_FIQ |
|
bool "S3C24XX driver with FIQ pseudo-DMA" |
|
depends on SPI_S3C24XX |
|
select FIQ |
|
help |
|
Enable FIQ support for the S3C24XX SPI driver to provide pseudo |
|
DMA by using the fast-interrupt request framework, This allows |
|
the driver to get DMA-like performance when there are either |
|
no free DMA channels, or when doing transfers that required both |
|
TX and RX data paths. |
|
|
|
config SPI_S3C64XX |
|
tristate "Samsung S3C64XX series type SPI" |
|
depends on (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST) |
|
help |
|
SPI driver for Samsung S3C64XX and newer SoCs. |
|
|
|
config SPI_SC18IS602 |
|
tristate "NXP SC18IS602/602B/603 I2C to SPI bridge" |
|
depends on I2C |
|
help |
|
SPI driver for NXP SC18IS602/602B/603 I2C to SPI bridge. |
|
|
|
config SPI_SH_MSIOF |
|
tristate "SuperH MSIOF SPI controller" |
|
depends on HAVE_CLK |
|
depends on ARCH_SHMOBILE || ARCH_RENESAS || COMPILE_TEST |
|
help |
|
SPI driver for SuperH and SH Mobile MSIOF blocks. |
|
|
|
config SPI_SH |
|
tristate "SuperH SPI controller" |
|
depends on SUPERH || COMPILE_TEST |
|
help |
|
SPI driver for SuperH SPI blocks. |
|
|
|
config SPI_SH_SCI |
|
tristate "SuperH SCI SPI controller" |
|
depends on SUPERH |
|
select SPI_BITBANG |
|
help |
|
SPI driver for SuperH SCI blocks. |
|
|
|
config SPI_SH_HSPI |
|
tristate "SuperH HSPI controller" |
|
depends on ARCH_RENESAS || COMPILE_TEST |
|
help |
|
SPI driver for SuperH HSPI blocks. |
|
|
|
config SPI_SIFIVE |
|
tristate "SiFive SPI controller" |
|
depends on HAS_IOMEM |
|
help |
|
This exposes the SPI controller IP from SiFive. |
|
|
|
config SPI_SLAVE_MT27XX |
|
tristate "MediaTek SPI slave device" |
|
depends on ARCH_MEDIATEK || COMPILE_TEST |
|
depends on SPI_SLAVE |
|
help |
|
This selects the MediaTek(R) SPI slave device driver. |
|
If you want to use MediaTek(R) SPI slave interface, |
|
say Y or M here.If you are not sure, say N. |
|
SPI slave drivers for Mediatek MT27XX series ARM SoCs. |
|
|
|
config SPI_SPRD |
|
tristate "Spreadtrum SPI controller" |
|
depends on ARCH_SPRD || COMPILE_TEST |
|
help |
|
SPI driver for Spreadtrum SoCs. |
|
|
|
config SPI_SPRD_ADI |
|
tristate "Spreadtrum ADI controller" |
|
depends on ARCH_SPRD || COMPILE_TEST |
|
depends on HWSPINLOCK || (COMPILE_TEST && !HWSPINLOCK) |
|
help |
|
ADI driver based on SPI for Spreadtrum SoCs. |
|
|
|
config SPI_STM32 |
|
tristate "STMicroelectronics STM32 SPI controller" |
|
depends on ARCH_STM32 || COMPILE_TEST |
|
help |
|
SPI driver for STMicroelectronics STM32 SoCs. |
|
|
|
STM32 SPI controller supports DMA and PIO modes. When DMA |
|
is not available, the driver automatically falls back to |
|
PIO mode. |
|
|
|
config SPI_STM32_QSPI |
|
tristate "STMicroelectronics STM32 QUAD SPI controller" |
|
depends on ARCH_STM32 || COMPILE_TEST |
|
depends on OF |
|
help |
|
This enables support for the Quad SPI controller in master mode. |
|
This driver does not support generic SPI. The implementation only |
|
supports spi-mem interface. |
|
|
|
config SPI_ST_SSC4 |
|
tristate "STMicroelectronics SPI SSC-based driver" |
|
depends on ARCH_STI || COMPILE_TEST |
|
help |
|
STMicroelectronics SoCs support for SPI. If you say yes to |
|
this option, support will be included for the SSC driven SPI. |
|
|
|
config SPI_SUN4I |
|
tristate "Allwinner A10 SoCs SPI controller" |
|
depends on ARCH_SUNXI || COMPILE_TEST |
|
help |
|
SPI driver for Allwinner sun4i, sun5i and sun7i SoCs |
|
|
|
config SPI_SUN6I |
|
tristate "Allwinner A31 SPI controller" |
|
depends on ARCH_SUNXI || COMPILE_TEST |
|
depends on RESET_CONTROLLER |
|
help |
|
This enables using the SPI controller on the Allwinner A31 SoCs. |
|
|
|
config SPI_SYNQUACER |
|
tristate "Socionext's SynQuacer HighSpeed SPI controller" |
|
depends on ARCH_SYNQUACER || COMPILE_TEST |
|
help |
|
SPI driver for Socionext's High speed SPI controller which provides |
|
various operating modes for interfacing to serial peripheral devices |
|
that use the de-facto standard SPI protocol. |
|
|
|
It also supports the new dual-bit and quad-bit SPI protocol. |
|
|
|
config SPI_MXIC |
|
tristate "Macronix MX25F0A SPI controller" |
|
depends on SPI_MASTER |
|
help |
|
This selects the Macronix MX25F0A SPI controller driver. |
|
|
|
config SPI_MXS |
|
tristate "Freescale MXS SPI controller" |
|
depends on ARCH_MXS |
|
select STMP_DEVICE |
|
help |
|
SPI driver for Freescale MXS devices. |
|
|
|
config SPI_TEGRA210_QUAD |
|
tristate "NVIDIA Tegra QSPI Controller" |
|
depends on ARCH_TEGRA || COMPILE_TEST |
|
depends on RESET_CONTROLLER |
|
help |
|
QSPI driver for NVIDIA Tegra QSPI Controller interface. This |
|
controller is different from the SPI controller and is available |
|
on Tegra SoCs starting from Tegra210. |
|
|
|
config SPI_TEGRA114 |
|
tristate "NVIDIA Tegra114 SPI Controller" |
|
depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST |
|
depends on RESET_CONTROLLER |
|
help |
|
SPI driver for NVIDIA Tegra114 SPI Controller interface. This controller |
|
is different than the older SoCs SPI controller and also register interface |
|
get changed with this controller. |
|
|
|
config SPI_TEGRA20_SFLASH |
|
tristate "Nvidia Tegra20 Serial flash Controller" |
|
depends on ARCH_TEGRA || COMPILE_TEST |
|
depends on RESET_CONTROLLER |
|
help |
|
SPI driver for Nvidia Tegra20 Serial flash Controller interface. |
|
The main usecase of this controller is to use spi flash as boot |
|
device. |
|
|
|
config SPI_TEGRA20_SLINK |
|
tristate "Nvidia Tegra20/Tegra30 SLINK Controller" |
|
depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST |
|
depends on RESET_CONTROLLER |
|
help |
|
SPI driver for Nvidia Tegra20/Tegra30 SLINK Controller interface. |
|
|
|
config SPI_THUNDERX |
|
tristate "Cavium ThunderX SPI controller" |
|
depends on PCI && 64BIT && (ARM64 || COMPILE_TEST) |
|
help |
|
SPI host driver for the hardware found on Cavium ThunderX |
|
SOCs. |
|
|
|
config SPI_TOPCLIFF_PCH |
|
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) SPI" |
|
depends on PCI && (X86_32 || MIPS || COMPILE_TEST) |
|
help |
|
SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus |
|
used in some x86 embedded processors. |
|
|
|
This driver also supports the ML7213/ML7223/ML7831, a companion chip |
|
for the Atom E6xx series and compatible with the Intel EG20T PCH. |
|
|
|
config SPI_UNIPHIER |
|
tristate "Socionext UniPhier SPI Controller" |
|
depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF |
|
depends on HAS_IOMEM |
|
help |
|
This enables a driver for the Socionext UniPhier SoC SCSSI SPI controller. |
|
|
|
UniPhier SoCs have SCSSI and MCSSI SPI controllers. |
|
Every UniPhier SoC has SCSSI which supports single channel. |
|
Older UniPhier Pro4/Pro5 also has MCSSI which support multiple channels. |
|
This driver supports SCSSI only. |
|
|
|
If your SoC supports SCSSI, say Y here. |
|
|
|
config SPI_XCOMM |
|
tristate "Analog Devices AD-FMCOMMS1-EBZ SPI-I2C-bridge driver" |
|
depends on I2C |
|
help |
|
Support for the SPI-I2C bridge found on the Analog Devices |
|
AD-FMCOMMS1-EBZ board. |
|
|
|
config SPI_XILINX |
|
tristate "Xilinx SPI controller common module" |
|
depends on HAS_IOMEM |
|
select SPI_BITBANG |
|
help |
|
This exposes the SPI controller IP from the Xilinx EDK. |
|
|
|
See the "OPB Serial Peripheral Interface (SPI) (v1.00e)" |
|
Product Specification document (DS464) for hardware details. |
|
|
|
Or for the DS570, see "XPS Serial Peripheral Interface (SPI) (v2.00b)" |
|
|
|
config SPI_XLP |
|
tristate "Netlogic XLP SPI controller driver" |
|
depends on CPU_XLP || ARCH_THUNDER2 || COMPILE_TEST |
|
help |
|
Enable support for the SPI controller on the Netlogic XLP SoCs. |
|
Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX, XLP9XX |
|
and XLP5XX. |
|
|
|
If you have a Netlogic XLP platform say Y here. |
|
If unsure, say N. |
|
|
|
config SPI_XTENSA_XTFPGA |
|
tristate "Xtensa SPI controller for xtfpga" |
|
depends on (XTENSA && XTENSA_PLATFORM_XTFPGA) || COMPILE_TEST |
|
select SPI_BITBANG |
|
help |
|
SPI driver for xtfpga SPI master controller. |
|
|
|
This simple SPI master controller is built into xtfpga bitstreams |
|
and is used to control daughterboard audio codec. It always transfers |
|
16 bit words in SPI mode 0, automatically asserting CS on transfer |
|
start and deasserting on end. |
|
|
|
config SPI_ZYNQ_QSPI |
|
tristate "Xilinx Zynq QSPI controller" |
|
depends on ARCH_ZYNQ || COMPILE_TEST |
|
help |
|
This enables support for the Zynq Quad SPI controller |
|
in master mode. |
|
This controller only supports SPI memory interface. |
|
|
|
config SPI_ZYNQMP_GQSPI |
|
tristate "Xilinx ZynqMP GQSPI controller" |
|
depends on (SPI_MASTER && HAS_DMA) || COMPILE_TEST |
|
help |
|
Enables Xilinx GQSPI controller driver for Zynq UltraScale+ MPSoC. |
|
|
|
config SPI_AMD |
|
tristate "AMD SPI controller" |
|
depends on SPI_MASTER || COMPILE_TEST |
|
help |
|
Enables SPI controller driver for AMD SoC. |
|
|
|
# |
|
# Add new SPI master controllers in alphabetical order above this line |
|
# |
|
|
|
comment "SPI Multiplexer support" |
|
|
|
config SPI_MUX |
|
tristate "SPI multiplexer support" |
|
select MULTIPLEXER |
|
help |
|
This adds support for SPI multiplexers. Each SPI mux will be |
|
accessible as a SPI controller, the devices behind the mux will appear |
|
to be chip selects on this controller. It is still necessary to |
|
select one or more specific mux-controller drivers. |
|
|
|
# |
|
# There are lots of SPI device types, with sensors and memory |
|
# being probably the most widely used ones. |
|
# |
|
comment "SPI Protocol Masters" |
|
|
|
config SPI_SPIDEV |
|
tristate "User mode SPI device driver support" |
|
help |
|
This supports user mode SPI protocol drivers. |
|
|
|
Note that this application programming interface is EXPERIMENTAL |
|
and hence SUBJECT TO CHANGE WITHOUT NOTICE while it stabilizes. |
|
|
|
config SPI_LOOPBACK_TEST |
|
tristate "spi loopback test framework support" |
|
depends on m |
|
help |
|
This enables the SPI loopback testing framework driver |
|
|
|
primarily used for development of spi_master drivers |
|
and to detect regressions |
|
|
|
config SPI_TLE62X0 |
|
tristate "Infineon TLE62X0 (for power switching)" |
|
depends on SYSFS |
|
help |
|
SPI driver for Infineon TLE62X0 series line driver chips, |
|
such as the TLE6220, TLE6230 and TLE6240. This provides a |
|
sysfs interface, with each line presented as a kind of GPIO |
|
exposing both switch control and diagnostic feedback. |
|
|
|
# |
|
# Add new SPI protocol masters in alphabetical order above this line |
|
# |
|
|
|
endif # SPI_MASTER |
|
|
|
# |
|
# SLAVE side ... listening to other SPI masters |
|
# |
|
|
|
config SPI_SLAVE |
|
bool "SPI slave protocol handlers" |
|
help |
|
If your system has a slave-capable SPI controller, you can enable |
|
slave protocol handlers. |
|
|
|
if SPI_SLAVE |
|
|
|
config SPI_SLAVE_TIME |
|
tristate "SPI slave handler reporting boot up time" |
|
help |
|
SPI slave handler responding with the time of reception of the last |
|
SPI message. |
|
|
|
config SPI_SLAVE_SYSTEM_CONTROL |
|
tristate "SPI slave handler controlling system state" |
|
help |
|
SPI slave handler to allow remote control of system reboot, power |
|
off, halt, and suspend. |
|
|
|
endif # SPI_SLAVE |
|
|
|
config SPI_DYNAMIC |
|
def_bool ACPI || OF_DYNAMIC || SPI_SLAVE |
|
|
|
endif # SPI
|
|
|