mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
174 lines
3.4 KiB
174 lines
3.4 KiB
// SPDX-License-Identifier: GPL-2.0-or-later |
|
/* |
|
* MPC5121E ADS Device Tree Source |
|
* |
|
* Copyright 2007-2008 Freescale Semiconductor Inc. |
|
*/ |
|
|
|
#include "mpc5121.dtsi" |
|
|
|
/ { |
|
model = "mpc5121ads"; |
|
compatible = "fsl,mpc5121ads", "fsl,mpc5121"; |
|
|
|
nfc@40000000 { |
|
/* |
|
* ADS has two Hynix 512MB Nand flash chips in a single |
|
* stacked package. |
|
*/ |
|
chips = <2>; |
|
|
|
nand@0 { |
|
label = "nand"; |
|
reg = <0x00000000 0x40000000>; /* 512MB + 512MB */ |
|
}; |
|
}; |
|
|
|
localbus@80000020 { |
|
ranges = <0x0 0x0 0xfc000000 0x04000000 |
|
0x2 0x0 0x82000000 0x00008000>; |
|
|
|
flash@0,0 { |
|
compatible = "cfi-flash"; |
|
reg = <0 0x0 0x4000000>; |
|
#address-cells = <1>; |
|
#size-cells = <1>; |
|
bank-width = <4>; |
|
device-width = <2>; |
|
|
|
protected@0 { |
|
label = "protected"; |
|
reg = <0x00000000 0x00040000>; // first sector is protected |
|
read-only; |
|
}; |
|
filesystem@40000 { |
|
label = "filesystem"; |
|
reg = <0x00040000 0x03c00000>; // 60M for filesystem |
|
}; |
|
kernel@3c40000 { |
|
label = "kernel"; |
|
reg = <0x03c40000 0x00280000>; // 2.5M for kernel |
|
}; |
|
device-tree@3ec0000 { |
|
label = "device-tree"; |
|
reg = <0x03ec0000 0x00040000>; // one sector for device tree |
|
}; |
|
u-boot@3f00000 { |
|
label = "u-boot"; |
|
reg = <0x03f00000 0x00100000>; // 1M for u-boot |
|
read-only; |
|
}; |
|
}; |
|
|
|
board-control@2,0 { |
|
compatible = "fsl,mpc5121ads-cpld"; |
|
reg = <0x2 0x0 0x8000>; |
|
}; |
|
|
|
cpld_pic: pic@2,a { |
|
compatible = "fsl,mpc5121ads-cpld-pic"; |
|
interrupt-controller; |
|
#interrupt-cells = <2>; |
|
reg = <0x2 0xa 0x5>; |
|
/* irq routing: |
|
* all irqs but touch screen are routed to irq0 (ipic 48) |
|
* touch screen is statically routed to irq1 (ipic 17) |
|
* so don't use it here |
|
*/ |
|
interrupts = <48 0x8>; |
|
}; |
|
}; |
|
|
|
soc@80000000 { |
|
|
|
i2c@1700 { |
|
fsl,preserve-clocking; |
|
|
|
hwmon@4a { |
|
compatible = "adi,ad7414"; |
|
reg = <0x4a>; |
|
}; |
|
|
|
eeprom@50 { |
|
compatible = "atmel,24c32"; |
|
reg = <0x50>; |
|
}; |
|
|
|
rtc@68 { |
|
compatible = "st,m41t62"; |
|
reg = <0x68>; |
|
}; |
|
}; |
|
|
|
eth0: ethernet@2800 { |
|
phy-handle = <&phy0>; |
|
}; |
|
|
|
can@2300 { |
|
status = "disabled"; |
|
}; |
|
|
|
can@2380 { |
|
status = "disabled"; |
|
}; |
|
|
|
viu@2400 { |
|
status = "disabled"; |
|
}; |
|
|
|
mdio@2800 { |
|
phy0: ethernet-phy@0 { |
|
reg = <1>; |
|
}; |
|
}; |
|
|
|
/* mpc5121ads only uses USB0 */ |
|
usb@3000 { |
|
status = "disabled"; |
|
}; |
|
|
|
/* USB0 using internal UTMI PHY */ |
|
usb@4000 { |
|
dr_mode = "host"; |
|
fsl,invert-drvvbus; |
|
fsl,invert-pwr-fault; |
|
}; |
|
|
|
/* PSC3 serial port A aka ttyPSC0 */ |
|
psc@11300 { |
|
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; |
|
}; |
|
|
|
/* PSC4 serial port B aka ttyPSC1 */ |
|
psc@11400 { |
|
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; |
|
}; |
|
|
|
/* PSC5 in ac97 mode */ |
|
ac97: psc@11500 { |
|
compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc"; |
|
fsl,mode = "ac97-slave"; |
|
fsl,rx-fifo-size = <384>; |
|
fsl,tx-fifo-size = <384>; |
|
}; |
|
}; |
|
|
|
pci: pci@80008500 { |
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
|
interrupt-map = < |
|
/* IDSEL 0x15 - Slot 1 PCI */ |
|
0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8 |
|
0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8 |
|
0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8 |
|
0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8 |
|
|
|
/* IDSEL 0x16 - Slot 2 MiniPCI */ |
|
0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8 |
|
0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8 |
|
|
|
/* IDSEL 0x17 - Slot 3 MiniPCI */ |
|
0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8 |
|
0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8 |
|
>; |
|
}; |
|
};
|
|
|