mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
95 lines
2.2 KiB
95 lines
2.2 KiB
# SPDX-License-Identifier: GPL-2.0 |
|
%YAML 1.2 |
|
--- |
|
$id: http://devicetree.org/schemas/phy/allwinner,sun5i-a13-usb-phy.yaml# |
|
$schema: http://devicetree.org/meta-schemas/core.yaml# |
|
|
|
title: Allwinner A13 USB PHY Device Tree Bindings |
|
|
|
maintainers: |
|
- Chen-Yu Tsai <[email protected]> |
|
- Maxime Ripard <[email protected]> |
|
|
|
properties: |
|
"#phy-cells": |
|
const: 1 |
|
|
|
compatible: |
|
const: allwinner,sun5i-a13-usb-phy |
|
|
|
reg: |
|
items: |
|
- description: PHY Control registers |
|
- description: PHY PMU1 registers |
|
|
|
reg-names: |
|
items: |
|
- const: phy_ctrl |
|
- const: pmu1 |
|
|
|
clocks: |
|
maxItems: 1 |
|
description: USB OTG PHY bus clock |
|
|
|
clock-names: |
|
const: usb_phy |
|
|
|
resets: |
|
items: |
|
- description: USB OTG reset |
|
- description: USB Host 1 Controller reset |
|
|
|
reset-names: |
|
items: |
|
- const: usb0_reset |
|
- const: usb1_reset |
|
|
|
usb0_id_det-gpios: |
|
maxItems: 1 |
|
description: GPIO to the USB OTG ID pin |
|
|
|
usb0_vbus_det-gpios: |
|
maxItems: 1 |
|
description: GPIO to the USB OTG VBUS detect pin |
|
|
|
usb0_vbus_power-supply: |
|
description: Power supply to detect the USB OTG VBUS |
|
|
|
usb0_vbus-supply: |
|
description: Regulator controlling USB OTG VBUS |
|
|
|
usb1_vbus-supply: |
|
description: Regulator controlling USB1 Host controller |
|
|
|
required: |
|
- "#phy-cells" |
|
- compatible |
|
- clocks |
|
- clock-names |
|
- reg |
|
- reg-names |
|
- resets |
|
- reset-names |
|
|
|
additionalProperties: false |
|
|
|
examples: |
|
- | |
|
#include <dt-bindings/gpio/gpio.h> |
|
#include <dt-bindings/clock/sun5i-ccu.h> |
|
#include <dt-bindings/reset/sun5i-ccu.h> |
|
|
|
phy@1c13400 { |
|
#phy-cells = <1>; |
|
compatible = "allwinner,sun5i-a13-usb-phy"; |
|
reg = <0x01c13400 0x10>, <0x01c14800 0x4>; |
|
reg-names = "phy_ctrl", "pmu1"; |
|
clocks = <&ccu CLK_USB_PHY0>; |
|
clock-names = "usb_phy"; |
|
resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>; |
|
reset-names = "usb0_reset", "usb1_reset"; |
|
usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ |
|
usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */ |
|
usb0_vbus-supply = <®_usb0_vbus>; |
|
usb1_vbus-supply = <®_usb1_vbus>; |
|
};
|
|
|