mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
38 lines
1.0 KiB
38 lines
1.0 KiB
* Marvell PXA168 Ethernet Controller |
|
|
|
Required properties: |
|
- compatible: should be "marvell,pxa168-eth". |
|
- reg: address and length of the register set for the device. |
|
- interrupts: interrupt for the device. |
|
- clocks: pointer to the clock for the device. |
|
|
|
Optional properties: |
|
- port-id: Ethernet port number. Should be '0','1' or '2'. |
|
- #address-cells: must be 1 when using sub-nodes. |
|
- #size-cells: must be 0 when using sub-nodes. |
|
- phy-handle: see ethernet.txt file in the same directory. |
|
|
|
The MAC address will be determined using the optional properties |
|
defined in ethernet.txt. |
|
|
|
Sub-nodes: |
|
Each PHY can be represented as a sub-node. This is not mandatory. |
|
|
|
Sub-nodes required properties: |
|
- reg: the MDIO address of the PHY. |
|
|
|
Example: |
|
|
|
eth0: ethernet@f7b90000 { |
|
compatible = "marvell,pxa168-eth"; |
|
reg = <0xf7b90000 0x10000>; |
|
clocks = <&chip CLKID_GETH0>; |
|
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
phy-handle = <ðphy0>; |
|
|
|
ethphy0: ethernet-phy@0 { |
|
reg = <0>; |
|
}; |
|
};
|
|
|