mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
113 lines
4.0 KiB
113 lines
4.0 KiB
* Altera Triple-Speed Ethernet MAC driver (TSE) |
|
|
|
Required properties: |
|
- compatible: Should be "altr,tse-1.0" for legacy SGDMA based TSE, and should |
|
be "altr,tse-msgdma-1.0" for the preferred MSGDMA based TSE. |
|
ALTR is supported for legacy device trees, but is deprecated. |
|
altr should be used for all new designs. |
|
- reg: Address and length of the register set for the device. It contains |
|
the information of registers in the same order as described by reg-names |
|
- reg-names: Should contain the reg names |
|
"control_port": MAC configuration space region |
|
"tx_csr": xDMA Tx dispatcher control and status space region |
|
"tx_desc": MSGDMA Tx dispatcher descriptor space region |
|
"rx_csr" : xDMA Rx dispatcher control and status space region |
|
"rx_desc": MSGDMA Rx dispatcher descriptor space region |
|
"rx_resp": MSGDMA Rx dispatcher response space region |
|
"s1": SGDMA descriptor memory |
|
- interrupts: Should contain the TSE interrupts and it's mode. |
|
- interrupt-names: Should contain the interrupt names |
|
"rx_irq": xDMA Rx dispatcher interrupt |
|
"tx_irq": xDMA Tx dispatcher interrupt |
|
- rx-fifo-depth: MAC receive FIFO buffer depth in bytes |
|
- tx-fifo-depth: MAC transmit FIFO buffer depth in bytes |
|
- phy-mode: See ethernet.txt in the same directory. |
|
- phy-handle: See ethernet.txt in the same directory. |
|
- phy-addr: See ethernet.txt in the same directory. A configuration should |
|
include phy-handle or phy-addr. |
|
- altr,has-supplementary-unicast: |
|
If present, TSE supports additional unicast addresses. |
|
Otherwise additional unicast addresses are not supported. |
|
- altr,has-hash-multicast-filter: |
|
If present, TSE supports a hash based multicast filter. |
|
Otherwise, hash-based multicast filtering is not supported. |
|
|
|
- mdio device tree subnode: When the TSE has a phy connected to its local |
|
mdio, there must be device tree subnode with the following |
|
required properties: |
|
|
|
- compatible: Must be "altr,tse-mdio". |
|
- #address-cells: Must be <1>. |
|
- #size-cells: Must be <0>. |
|
|
|
For each phy on the mdio bus, there must be a node with the following |
|
fields: |
|
|
|
- reg: phy id used to communicate to phy. |
|
- device_type: Must be "ethernet-phy". |
|
|
|
The MAC address will be determined using the optional properties defined in |
|
ethernet.txt. |
|
|
|
Example: |
|
|
|
tse_sub_0_eth_tse_0: ethernet@1,00000000 { |
|
compatible = "altr,tse-msgdma-1.0"; |
|
reg = <0x00000001 0x00000000 0x00000400>, |
|
<0x00000001 0x00000460 0x00000020>, |
|
<0x00000001 0x00000480 0x00000020>, |
|
<0x00000001 0x000004A0 0x00000008>, |
|
<0x00000001 0x00000400 0x00000020>, |
|
<0x00000001 0x00000420 0x00000020>; |
|
reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc"; |
|
interrupt-parent = <&hps_0_arm_gic_0>; |
|
interrupts = <0 41 4>, <0 40 4>; |
|
interrupt-names = "rx_irq", "tx_irq"; |
|
rx-fifo-depth = <2048>; |
|
tx-fifo-depth = <2048>; |
|
address-bits = <48>; |
|
max-frame-size = <1500>; |
|
local-mac-address = [ 00 00 00 00 00 00 ]; |
|
phy-mode = "gmii"; |
|
altr,has-supplementary-unicast; |
|
altr,has-hash-multicast-filter; |
|
phy-handle = <&phy0>; |
|
mdio { |
|
compatible = "altr,tse-mdio"; |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
phy0: ethernet-phy@0 { |
|
reg = <0x0>; |
|
device_type = "ethernet-phy"; |
|
}; |
|
|
|
phy1: ethernet-phy@1 { |
|
reg = <0x1>; |
|
device_type = "ethernet-phy"; |
|
}; |
|
|
|
}; |
|
}; |
|
|
|
tse_sub_1_eth_tse_0: ethernet@1,00001000 { |
|
compatible = "altr,tse-msgdma-1.0"; |
|
reg = <0x00000001 0x00001000 0x00000400>, |
|
<0x00000001 0x00001460 0x00000020>, |
|
<0x00000001 0x00001480 0x00000020>, |
|
<0x00000001 0x000014A0 0x00000008>, |
|
<0x00000001 0x00001400 0x00000020>, |
|
<0x00000001 0x00001420 0x00000020>; |
|
reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc"; |
|
interrupt-parent = <&hps_0_arm_gic_0>; |
|
interrupts = <0 43 4>, <0 42 4>; |
|
interrupt-names = "rx_irq", "tx_irq"; |
|
rx-fifo-depth = <2048>; |
|
tx-fifo-depth = <2048>; |
|
address-bits = <48>; |
|
max-frame-size = <1500>; |
|
local-mac-address = [ 00 00 00 00 00 00 ]; |
|
phy-mode = "gmii"; |
|
altr,has-supplementary-unicast; |
|
altr,has-hash-multicast-filter; |
|
phy-handle = <&phy1>; |
|
};
|
|
|