mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
49 lines
1.7 KiB
49 lines
1.7 KiB
* GPIO driven matrix keypad device tree bindings |
|
|
|
GPIO driven matrix keypad is used to interface a SoC with a matrix keypad. |
|
The matrix keypad supports multiple row and column lines, a key can be |
|
placed at each intersection of a unique row and a unique column. The matrix |
|
keypad can sense a key-press and key-release by means of GPIO lines and |
|
report the event using GPIO interrupts to the cpu. |
|
|
|
Required Properties: |
|
- compatible: Should be "gpio-matrix-keypad" |
|
- row-gpios: List of gpios used as row lines. The gpio specifier |
|
for this property depends on the gpio controller to |
|
which these row lines are connected. |
|
- col-gpios: List of gpios used as column lines. The gpio specifier |
|
for this property depends on the gpio controller to |
|
which these column lines are connected. |
|
- linux,keymap: The definition can be found at |
|
bindings/input/matrix-keymap.txt |
|
|
|
Optional Properties: |
|
- linux,no-autorepeat: do no enable autorepeat feature. |
|
- wakeup-source: use any event on keypad as wakeup event. |
|
(Legacy property supported: "linux,wakeup") |
|
- debounce-delay-ms: debounce interval in milliseconds |
|
- col-scan-delay-us: delay, measured in microseconds, that is needed |
|
before we can scan keypad after activating column gpio |
|
- drive-inactive-cols: drive inactive columns during scan, |
|
default is to turn inactive columns into inputs. |
|
|
|
Example: |
|
matrix-keypad { |
|
compatible = "gpio-matrix-keypad"; |
|
debounce-delay-ms = <5>; |
|
col-scan-delay-us = <2>; |
|
|
|
row-gpios = <&gpio2 25 0 |
|
&gpio2 26 0 |
|
&gpio2 27 0>; |
|
|
|
col-gpios = <&gpio2 21 0 |
|
&gpio2 22 0>; |
|
|
|
linux,keymap = <0x0000008B |
|
0x0100009E |
|
0x02000069 |
|
0x0001006A |
|
0x0101001C |
|
0x0201006C>; |
|
};
|
|
|