mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
41 lines
1.2 KiB
41 lines
1.2 KiB
* Spreadtrum DMA controller |
|
|
|
This binding follows the generic DMA bindings defined in dma.txt. |
|
|
|
Required properties: |
|
- compatible: Should be "sprd,sc9860-dma". |
|
- reg: Should contain DMA registers location and length. |
|
- interrupts: Should contain one interrupt shared by all channel. |
|
- #dma-cells: must be <1>. Used to represent the number of integer |
|
cells in the dmas property of client device. |
|
- #dma-channels : Number of DMA channels supported. Should be 32. |
|
- clock-names: Should contain the clock of the DMA controller. |
|
- clocks: Should contain a clock specifier for each entry in clock-names. |
|
|
|
Example: |
|
|
|
Controller: |
|
apdma: dma-controller@20100000 { |
|
compatible = "sprd,sc9860-dma"; |
|
reg = <0x20100000 0x4000>; |
|
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
|
#dma-cells = <1>; |
|
#dma-channels = <32>; |
|
clock-names = "enable"; |
|
clocks = <&clk_ap_ahb_gates 5>; |
|
}; |
|
|
|
|
|
Client: |
|
DMA clients connected to the Spreadtrum DMA controller must use the format |
|
described in the dma.txt file, using a two-cell specifier for each channel. |
|
The two cells in order are: |
|
1. A phandle pointing to the DMA controller. |
|
2. The slave id. |
|
|
|
spi0: spi@70a00000{ |
|
... |
|
dma-names = "rx_chn", "tx_chn"; |
|
dmas = <&apdma 11>, <&apdma 12>; |
|
... |
|
};
|
|
|