mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
78 lines
2.7 KiB
78 lines
2.7 KiB
sii902x HDMI bridge bindings |
|
|
|
Required properties: |
|
- compatible: "sil,sii9022" |
|
- reg: i2c address of the bridge |
|
|
|
Optional properties: |
|
- interrupts: describe the interrupt line used to inform the host |
|
about hotplug events. |
|
- reset-gpios: OF device-tree gpio specification for RST_N pin. |
|
- iovcc-supply: I/O Supply Voltage (1.8V or 3.3V) |
|
- cvcc12-supply: Digital Core Supply Voltage (1.2V) |
|
|
|
HDMI audio properties: |
|
- #sound-dai-cells: <0> or <1>. <0> if only i2s or spdif pin |
|
is wired, <1> if the both are wired. HDMI audio is |
|
configured only if this property is found. |
|
- sil,i2s-data-lanes: Array of up to 4 integers with values of 0-3 |
|
Each integer indicates which i2s pin is connected to which |
|
audio fifo. The first integer selects i2s audio pin for the |
|
first audio fifo#0 (HDMI channels 1&2), second for fifo#1 |
|
(HDMI channels 3&4), and so on. There is 4 fifos and 4 i2s |
|
pins (SD0 - SD3). Any i2s pin can be connected to any fifo, |
|
but there can be no gaps. E.g. an i2s pin must be mapped to |
|
fifo#0 and fifo#1 before mapping a channel to fifo#2. Default |
|
value is <0>, describing SD0 pin beiging routed to hdmi audio |
|
fifo #0. |
|
- clocks: phandle and clock specifier for each clock listed in |
|
the clock-names property |
|
- clock-names: "mclk" |
|
Describes SII902x MCLK input. MCLK can be used to produce |
|
HDMI audio CTS values. This property follows |
|
Documentation/devicetree/bindings/clock/clock-bindings.txt |
|
consumer binding. |
|
|
|
If HDMI audio is configured the sii902x device becomes an I2S |
|
and/or spdif audio codec component (e.g a digital audio sink), |
|
that can be used in configuring a full audio devices with |
|
simple-card or audio-graph-card binding. See their binding |
|
documents on how to describe the way the sii902x device is |
|
connected to the rest of the audio system: |
|
Documentation/devicetree/bindings/sound/simple-card.yaml |
|
Documentation/devicetree/bindings/sound/audio-graph-card.yaml |
|
Note: In case of the audio-graph-card binding the used port |
|
index should be 3. |
|
|
|
Optional subnodes: |
|
- video input: this subnode can contain a video input port node |
|
to connect the bridge to a display controller output (See this |
|
documentation [1]). |
|
|
|
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt |
|
|
|
Example: |
|
hdmi-bridge@39 { |
|
compatible = "sil,sii9022"; |
|
reg = <0x39>; |
|
reset-gpios = <&pioA 1 0>; |
|
iovcc-supply = <&v3v3_hdmi>; |
|
cvcc12-supply = <&v1v2_hdmi>; |
|
|
|
#sound-dai-cells = <0>; |
|
sil,i2s-data-lanes = < 0 1 2 >; |
|
clocks = <&mclk>; |
|
clock-names = "mclk"; |
|
|
|
ports { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
port@0 { |
|
reg = <0>; |
|
bridge_in: endpoint { |
|
remote-endpoint = <&dc_out>; |
|
}; |
|
}; |
|
}; |
|
};
|
|
|