mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
51 lines
1.7 KiB
51 lines
1.7 KiB
* Amlogic Meson8, Meson8b and Meson8m2 Clock and Reset Unit |
|
|
|
The Amlogic Meson8 / Meson8b / Meson8m2 clock controller generates and |
|
supplies clock to various controllers within the SoC. |
|
|
|
Required Properties: |
|
|
|
- compatible: must be one of: |
|
- "amlogic,meson8-clkc" for Meson8 (S802) SoCs |
|
- "amlogic,meson8b-clkc" for Meson8 (S805) SoCs |
|
- "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs |
|
- #clock-cells: should be 1. |
|
- #reset-cells: should be 1. |
|
- clocks: list of clock phandles, one for each entry in clock-names |
|
- clock-names: should contain the following: |
|
* "xtal": the 24MHz system oscillator |
|
* "ddr_pll": the DDR PLL clock |
|
* "clk_32k": (if present) the 32kHz clock signal from GPIOAO_6 (CLK_32K_IN) |
|
|
|
Parent node should have the following properties : |
|
- compatible: "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon" |
|
- reg: base address and size of the HHI system control register space. |
|
|
|
Each clock is assigned an identifier and client nodes can use this identifier |
|
to specify the clock which they consume. All available clocks are defined as |
|
preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be |
|
used in device tree sources. |
|
|
|
Similarly a preprocessor macro for each reset line is defined in |
|
dt-bindings/reset/amlogic,meson8b-clkc-reset.h (which can be used from the |
|
device tree sources). |
|
|
|
|
|
Example: Clock controller node: |
|
|
|
clkc: clock-controller { |
|
compatible = "amlogic,meson8b-clkc"; |
|
#clock-cells = <1>; |
|
#reset-cells = <1>; |
|
}; |
|
|
|
|
|
Example: UART controller node that consumes the clock generated by the clock |
|
controller: |
|
|
|
uart_AO: serial@c81004c0 { |
|
compatible = "amlogic,meson-uart"; |
|
reg = <0xc81004c0 0x14>; |
|
interrupts = <0 90 1>; |
|
clocks = <&clkc CLKID_CLK81>; |
|
};
|
|
|