mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
41 lines
1.3 KiB
41 lines
1.3 KiB
======================== |
|
Kernel driver w1_ds28e04 |
|
======================== |
|
|
|
Supported chips: |
|
|
|
* Maxim DS28E04-100 4096-Bit Addressable 1-Wire EEPROM with PIO |
|
|
|
supported family codes: |
|
|
|
================= ==== |
|
W1_FAMILY_DS28E04 0x1C |
|
================= ==== |
|
|
|
Author: Markus Franke, <[email protected]> <[email protected]> |
|
|
|
Description |
|
----------- |
|
|
|
Support is provided through the sysfs files "eeprom" and "pio". CRC checking |
|
during memory accesses can optionally be enabled/disabled via the device |
|
attribute "crccheck". The strong pull-up can optionally be enabled/disabled |
|
via the module parameter "w1_strong_pullup". |
|
|
|
Memory Access |
|
|
|
A read operation on the "eeprom" file reads the given amount of bytes |
|
from the EEPROM of the DS28E04. |
|
|
|
A write operation on the "eeprom" file writes the given byte sequence |
|
to the EEPROM of the DS28E04. If CRC checking mode is enabled only |
|
fully aligned blocks of 32 bytes with valid CRC16 values (in bytes 30 |
|
and 31) are allowed to be written. |
|
|
|
PIO Access |
|
|
|
The 2 PIOs of the DS28E04-100 are accessible via the "pio" sysfs file. |
|
|
|
The current status of the PIO's is returned as an 8 bit value. Bit 0/1 |
|
represent the state of PIO_0/PIO_1. Bits 2..7 do not care. The PIO's are |
|
driven low-active, i.e. the driver delivers/expects low-active values.
|
|
|