mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
820 lines
28 KiB
820 lines
28 KiB
/* SPDX-License-Identifier: GPL-2.0-or-later */ |
|
/* |
|
* linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver |
|
* |
|
* Header file for Host Controller registers and I/O accessors. |
|
* |
|
* Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved. |
|
*/ |
|
#ifndef __SDHCI_HW_H |
|
#define __SDHCI_HW_H |
|
|
|
#include <linux/bits.h> |
|
#include <linux/scatterlist.h> |
|
#include <linux/compiler.h> |
|
#include <linux/types.h> |
|
#include <linux/io.h> |
|
#include <linux/leds.h> |
|
#include <linux/interrupt.h> |
|
|
|
#include <linux/mmc/host.h> |
|
|
|
/* |
|
* Controller registers |
|
*/ |
|
|
|
#define SDHCI_DMA_ADDRESS 0x00 |
|
#define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS |
|
#define SDHCI_32BIT_BLK_CNT SDHCI_DMA_ADDRESS |
|
|
|
#define SDHCI_BLOCK_SIZE 0x04 |
|
#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF)) |
|
|
|
#define SDHCI_BLOCK_COUNT 0x06 |
|
|
|
#define SDHCI_ARGUMENT 0x08 |
|
|
|
#define SDHCI_TRANSFER_MODE 0x0C |
|
#define SDHCI_TRNS_DMA 0x01 |
|
#define SDHCI_TRNS_BLK_CNT_EN 0x02 |
|
#define SDHCI_TRNS_AUTO_CMD12 0x04 |
|
#define SDHCI_TRNS_AUTO_CMD23 0x08 |
|
#define SDHCI_TRNS_AUTO_SEL 0x0C |
|
#define SDHCI_TRNS_READ 0x10 |
|
#define SDHCI_TRNS_MULTI 0x20 |
|
|
|
#define SDHCI_COMMAND 0x0E |
|
#define SDHCI_CMD_RESP_MASK 0x03 |
|
#define SDHCI_CMD_CRC 0x08 |
|
#define SDHCI_CMD_INDEX 0x10 |
|
#define SDHCI_CMD_DATA 0x20 |
|
#define SDHCI_CMD_ABORTCMD 0xC0 |
|
|
|
#define SDHCI_CMD_RESP_NONE 0x00 |
|
#define SDHCI_CMD_RESP_LONG 0x01 |
|
#define SDHCI_CMD_RESP_SHORT 0x02 |
|
#define SDHCI_CMD_RESP_SHORT_BUSY 0x03 |
|
|
|
#define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff)) |
|
#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f) |
|
|
|
#define SDHCI_RESPONSE 0x10 |
|
|
|
#define SDHCI_BUFFER 0x20 |
|
|
|
#define SDHCI_PRESENT_STATE 0x24 |
|
#define SDHCI_CMD_INHIBIT 0x00000001 |
|
#define SDHCI_DATA_INHIBIT 0x00000002 |
|
#define SDHCI_DOING_WRITE 0x00000100 |
|
#define SDHCI_DOING_READ 0x00000200 |
|
#define SDHCI_SPACE_AVAILABLE 0x00000400 |
|
#define SDHCI_DATA_AVAILABLE 0x00000800 |
|
#define SDHCI_CARD_PRESENT 0x00010000 |
|
#define SDHCI_CARD_PRES_SHIFT 16 |
|
#define SDHCI_CD_STABLE 0x00020000 |
|
#define SDHCI_CD_LVL 0x00040000 |
|
#define SDHCI_CD_LVL_SHIFT 18 |
|
#define SDHCI_WRITE_PROTECT 0x00080000 |
|
#define SDHCI_DATA_LVL_MASK 0x00F00000 |
|
#define SDHCI_DATA_LVL_SHIFT 20 |
|
#define SDHCI_DATA_0_LVL_MASK 0x00100000 |
|
#define SDHCI_CMD_LVL 0x01000000 |
|
|
|
#define SDHCI_HOST_CONTROL 0x28 |
|
#define SDHCI_CTRL_LED 0x01 |
|
#define SDHCI_CTRL_4BITBUS 0x02 |
|
#define SDHCI_CTRL_HISPD 0x04 |
|
#define SDHCI_CTRL_DMA_MASK 0x18 |
|
#define SDHCI_CTRL_SDMA 0x00 |
|
#define SDHCI_CTRL_ADMA1 0x08 |
|
#define SDHCI_CTRL_ADMA32 0x10 |
|
#define SDHCI_CTRL_ADMA64 0x18 |
|
#define SDHCI_CTRL_ADMA3 0x18 |
|
#define SDHCI_CTRL_8BITBUS 0x20 |
|
#define SDHCI_CTRL_CDTEST_INS 0x40 |
|
#define SDHCI_CTRL_CDTEST_EN 0x80 |
|
|
|
#define SDHCI_POWER_CONTROL 0x29 |
|
#define SDHCI_POWER_ON 0x01 |
|
#define SDHCI_POWER_180 0x0A |
|
#define SDHCI_POWER_300 0x0C |
|
#define SDHCI_POWER_330 0x0E |
|
|
|
#define SDHCI_BLOCK_GAP_CONTROL 0x2A |
|
|
|
#define SDHCI_WAKE_UP_CONTROL 0x2B |
|
#define SDHCI_WAKE_ON_INT 0x01 |
|
#define SDHCI_WAKE_ON_INSERT 0x02 |
|
#define SDHCI_WAKE_ON_REMOVE 0x04 |
|
|
|
#define SDHCI_CLOCK_CONTROL 0x2C |
|
#define SDHCI_DIVIDER_SHIFT 8 |
|
#define SDHCI_DIVIDER_HI_SHIFT 6 |
|
#define SDHCI_DIV_MASK 0xFF |
|
#define SDHCI_DIV_MASK_LEN 8 |
|
#define SDHCI_DIV_HI_MASK 0x300 |
|
#define SDHCI_PROG_CLOCK_MODE 0x0020 |
|
#define SDHCI_CLOCK_CARD_EN 0x0004 |
|
#define SDHCI_CLOCK_PLL_EN 0x0008 |
|
#define SDHCI_CLOCK_INT_STABLE 0x0002 |
|
#define SDHCI_CLOCK_INT_EN 0x0001 |
|
|
|
#define SDHCI_TIMEOUT_CONTROL 0x2E |
|
|
|
#define SDHCI_SOFTWARE_RESET 0x2F |
|
#define SDHCI_RESET_ALL 0x01 |
|
#define SDHCI_RESET_CMD 0x02 |
|
#define SDHCI_RESET_DATA 0x04 |
|
|
|
#define SDHCI_INT_STATUS 0x30 |
|
#define SDHCI_INT_ENABLE 0x34 |
|
#define SDHCI_SIGNAL_ENABLE 0x38 |
|
#define SDHCI_INT_RESPONSE 0x00000001 |
|
#define SDHCI_INT_DATA_END 0x00000002 |
|
#define SDHCI_INT_BLK_GAP 0x00000004 |
|
#define SDHCI_INT_DMA_END 0x00000008 |
|
#define SDHCI_INT_SPACE_AVAIL 0x00000010 |
|
#define SDHCI_INT_DATA_AVAIL 0x00000020 |
|
#define SDHCI_INT_CARD_INSERT 0x00000040 |
|
#define SDHCI_INT_CARD_REMOVE 0x00000080 |
|
#define SDHCI_INT_CARD_INT 0x00000100 |
|
#define SDHCI_INT_RETUNE 0x00001000 |
|
#define SDHCI_INT_CQE 0x00004000 |
|
#define SDHCI_INT_ERROR 0x00008000 |
|
#define SDHCI_INT_TIMEOUT 0x00010000 |
|
#define SDHCI_INT_CRC 0x00020000 |
|
#define SDHCI_INT_END_BIT 0x00040000 |
|
#define SDHCI_INT_INDEX 0x00080000 |
|
#define SDHCI_INT_DATA_TIMEOUT 0x00100000 |
|
#define SDHCI_INT_DATA_CRC 0x00200000 |
|
#define SDHCI_INT_DATA_END_BIT 0x00400000 |
|
#define SDHCI_INT_BUS_POWER 0x00800000 |
|
#define SDHCI_INT_AUTO_CMD_ERR 0x01000000 |
|
#define SDHCI_INT_ADMA_ERROR 0x02000000 |
|
|
|
#define SDHCI_INT_NORMAL_MASK 0x00007FFF |
|
#define SDHCI_INT_ERROR_MASK 0xFFFF8000 |
|
|
|
#define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \ |
|
SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX | \ |
|
SDHCI_INT_AUTO_CMD_ERR) |
|
#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \ |
|
SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \ |
|
SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \ |
|
SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \ |
|
SDHCI_INT_BLK_GAP) |
|
#define SDHCI_INT_ALL_MASK ((unsigned int)-1) |
|
|
|
#define SDHCI_CQE_INT_ERR_MASK ( \ |
|
SDHCI_INT_ADMA_ERROR | SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | \ |
|
SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX | \ |
|
SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT) |
|
|
|
#define SDHCI_CQE_INT_MASK (SDHCI_CQE_INT_ERR_MASK | SDHCI_INT_CQE) |
|
|
|
#define SDHCI_AUTO_CMD_STATUS 0x3C |
|
#define SDHCI_AUTO_CMD_TIMEOUT 0x00000002 |
|
#define SDHCI_AUTO_CMD_CRC 0x00000004 |
|
#define SDHCI_AUTO_CMD_END_BIT 0x00000008 |
|
#define SDHCI_AUTO_CMD_INDEX 0x00000010 |
|
|
|
#define SDHCI_HOST_CONTROL2 0x3E |
|
#define SDHCI_CTRL_UHS_MASK 0x0007 |
|
#define SDHCI_CTRL_UHS_SDR12 0x0000 |
|
#define SDHCI_CTRL_UHS_SDR25 0x0001 |
|
#define SDHCI_CTRL_UHS_SDR50 0x0002 |
|
#define SDHCI_CTRL_UHS_SDR104 0x0003 |
|
#define SDHCI_CTRL_UHS_DDR50 0x0004 |
|
#define SDHCI_CTRL_HS400 0x0005 /* Non-standard */ |
|
#define SDHCI_CTRL_VDD_180 0x0008 |
|
#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030 |
|
#define SDHCI_CTRL_DRV_TYPE_B 0x0000 |
|
#define SDHCI_CTRL_DRV_TYPE_A 0x0010 |
|
#define SDHCI_CTRL_DRV_TYPE_C 0x0020 |
|
#define SDHCI_CTRL_DRV_TYPE_D 0x0030 |
|
#define SDHCI_CTRL_EXEC_TUNING 0x0040 |
|
#define SDHCI_CTRL_TUNED_CLK 0x0080 |
|
#define SDHCI_CMD23_ENABLE 0x0800 |
|
#define SDHCI_CTRL_V4_MODE 0x1000 |
|
#define SDHCI_CTRL_64BIT_ADDR 0x2000 |
|
#define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000 |
|
|
|
#define SDHCI_CAPABILITIES 0x40 |
|
#define SDHCI_TIMEOUT_CLK_MASK GENMASK(5, 0) |
|
#define SDHCI_TIMEOUT_CLK_SHIFT 0 |
|
#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080 |
|
#define SDHCI_CLOCK_BASE_MASK GENMASK(13, 8) |
|
#define SDHCI_CLOCK_BASE_SHIFT 8 |
|
#define SDHCI_CLOCK_V3_BASE_MASK GENMASK(15, 8) |
|
#define SDHCI_MAX_BLOCK_MASK 0x00030000 |
|
#define SDHCI_MAX_BLOCK_SHIFT 16 |
|
#define SDHCI_CAN_DO_8BIT 0x00040000 |
|
#define SDHCI_CAN_DO_ADMA2 0x00080000 |
|
#define SDHCI_CAN_DO_ADMA1 0x00100000 |
|
#define SDHCI_CAN_DO_HISPD 0x00200000 |
|
#define SDHCI_CAN_DO_SDMA 0x00400000 |
|
#define SDHCI_CAN_DO_SUSPEND 0x00800000 |
|
#define SDHCI_CAN_VDD_330 0x01000000 |
|
#define SDHCI_CAN_VDD_300 0x02000000 |
|
#define SDHCI_CAN_VDD_180 0x04000000 |
|
#define SDHCI_CAN_64BIT_V4 0x08000000 |
|
#define SDHCI_CAN_64BIT 0x10000000 |
|
|
|
#define SDHCI_CAPABILITIES_1 0x44 |
|
#define SDHCI_SUPPORT_SDR50 0x00000001 |
|
#define SDHCI_SUPPORT_SDR104 0x00000002 |
|
#define SDHCI_SUPPORT_DDR50 0x00000004 |
|
#define SDHCI_DRIVER_TYPE_A 0x00000010 |
|
#define SDHCI_DRIVER_TYPE_C 0x00000020 |
|
#define SDHCI_DRIVER_TYPE_D 0x00000040 |
|
#define SDHCI_RETUNING_TIMER_COUNT_MASK GENMASK(11, 8) |
|
#define SDHCI_USE_SDR50_TUNING 0x00002000 |
|
#define SDHCI_RETUNING_MODE_MASK GENMASK(15, 14) |
|
#define SDHCI_CLOCK_MUL_MASK GENMASK(23, 16) |
|
#define SDHCI_CAN_DO_ADMA3 0x08000000 |
|
#define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */ |
|
|
|
#define SDHCI_MAX_CURRENT 0x48 |
|
#define SDHCI_MAX_CURRENT_LIMIT GENMASK(7, 0) |
|
#define SDHCI_MAX_CURRENT_330_MASK GENMASK(7, 0) |
|
#define SDHCI_MAX_CURRENT_300_MASK GENMASK(15, 8) |
|
#define SDHCI_MAX_CURRENT_180_MASK GENMASK(23, 16) |
|
#define SDHCI_MAX_CURRENT_MULTIPLIER 4 |
|
|
|
/* 4C-4F reserved for more max current */ |
|
|
|
#define SDHCI_SET_ACMD12_ERROR 0x50 |
|
#define SDHCI_SET_INT_ERROR 0x52 |
|
|
|
#define SDHCI_ADMA_ERROR 0x54 |
|
|
|
/* 55-57 reserved */ |
|
|
|
#define SDHCI_ADMA_ADDRESS 0x58 |
|
#define SDHCI_ADMA_ADDRESS_HI 0x5C |
|
|
|
/* 60-FB reserved */ |
|
|
|
#define SDHCI_PRESET_FOR_HIGH_SPEED 0x64 |
|
#define SDHCI_PRESET_FOR_SDR12 0x66 |
|
#define SDHCI_PRESET_FOR_SDR25 0x68 |
|
#define SDHCI_PRESET_FOR_SDR50 0x6A |
|
#define SDHCI_PRESET_FOR_SDR104 0x6C |
|
#define SDHCI_PRESET_FOR_DDR50 0x6E |
|
#define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */ |
|
#define SDHCI_PRESET_DRV_MASK GENMASK(15, 14) |
|
#define SDHCI_PRESET_CLKGEN_SEL BIT(10) |
|
#define SDHCI_PRESET_SDCLK_FREQ_MASK GENMASK(9, 0) |
|
|
|
#define SDHCI_SLOT_INT_STATUS 0xFC |
|
|
|
#define SDHCI_HOST_VERSION 0xFE |
|
#define SDHCI_VENDOR_VER_MASK 0xFF00 |
|
#define SDHCI_VENDOR_VER_SHIFT 8 |
|
#define SDHCI_SPEC_VER_MASK 0x00FF |
|
#define SDHCI_SPEC_VER_SHIFT 0 |
|
#define SDHCI_SPEC_100 0 |
|
#define SDHCI_SPEC_200 1 |
|
#define SDHCI_SPEC_300 2 |
|
#define SDHCI_SPEC_400 3 |
|
#define SDHCI_SPEC_410 4 |
|
#define SDHCI_SPEC_420 5 |
|
|
|
/* |
|
* End of controller registers. |
|
*/ |
|
|
|
#define SDHCI_MAX_DIV_SPEC_200 256 |
|
#define SDHCI_MAX_DIV_SPEC_300 2046 |
|
|
|
/* |
|
* Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2. |
|
*/ |
|
#define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024) |
|
#define SDHCI_DEFAULT_BOUNDARY_ARG (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12) |
|
|
|
/* ADMA2 32-bit DMA descriptor size */ |
|
#define SDHCI_ADMA2_32_DESC_SZ 8 |
|
|
|
/* ADMA2 32-bit descriptor */ |
|
struct sdhci_adma2_32_desc { |
|
__le16 cmd; |
|
__le16 len; |
|
__le32 addr; |
|
} __packed __aligned(4); |
|
|
|
/* ADMA2 data alignment */ |
|
#define SDHCI_ADMA2_ALIGN 4 |
|
#define SDHCI_ADMA2_MASK (SDHCI_ADMA2_ALIGN - 1) |
|
|
|
/* |
|
* ADMA2 descriptor alignment. Some controllers (e.g. Intel) require 8 byte |
|
* alignment for the descriptor table even in 32-bit DMA mode. Memory |
|
* allocation is at least 8 byte aligned anyway, so just stipulate 8 always. |
|
*/ |
|
#define SDHCI_ADMA2_DESC_ALIGN 8 |
|
|
|
/* |
|
* ADMA2 64-bit DMA descriptor size |
|
* According to SD Host Controller spec v4.10, there are two kinds of |
|
* descriptors for 64-bit addressing mode: 96-bit Descriptor and 128-bit |
|
* Descriptor, if Host Version 4 Enable is set in the Host Control 2 |
|
* register, 128-bit Descriptor will be selected. |
|
*/ |
|
#define SDHCI_ADMA2_64_DESC_SZ(host) ((host)->v4_mode ? 16 : 12) |
|
|
|
/* |
|
* ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte |
|
* aligned. |
|
*/ |
|
struct sdhci_adma2_64_desc { |
|
__le16 cmd; |
|
__le16 len; |
|
__le32 addr_lo; |
|
__le32 addr_hi; |
|
} __packed __aligned(4); |
|
|
|
#define ADMA2_TRAN_VALID 0x21 |
|
#define ADMA2_NOP_END_VALID 0x3 |
|
#define ADMA2_END 0x2 |
|
|
|
/* |
|
* Maximum segments assuming a 512KiB maximum requisition size and a minimum |
|
* 4KiB page size. Note this also allows enough for multiple descriptors in |
|
* case of PAGE_SIZE >= 64KiB. |
|
*/ |
|
#define SDHCI_MAX_SEGS 128 |
|
|
|
/* Allow for a a command request and a data request at the same time */ |
|
#define SDHCI_MAX_MRQS 2 |
|
|
|
/* |
|
* 48bit command and 136 bit response in 100KHz clock could take upto 2.48ms. |
|
* However since the start time of the command, the time between |
|
* command and response, and the time between response and start of data is |
|
* not known, set the command transfer time to 10ms. |
|
*/ |
|
#define MMC_CMD_TRANSFER_TIME (10 * NSEC_PER_MSEC) /* max 10 ms */ |
|
|
|
#define sdhci_err_stats_inc(host, err_name) \ |
|
mmc_debugfs_err_stats_inc((host)->mmc, MMC_ERR_##err_name) |
|
|
|
enum sdhci_cookie { |
|
COOKIE_UNMAPPED, |
|
COOKIE_PRE_MAPPED, /* mapped by sdhci_pre_req() */ |
|
COOKIE_MAPPED, /* mapped by sdhci_prepare_data() */ |
|
}; |
|
|
|
struct sdhci_host { |
|
/* Data set by hardware interface driver */ |
|
const char *hw_name; /* Hardware bus name */ |
|
|
|
unsigned int quirks; /* Deviations from spec. */ |
|
|
|
/* Controller doesn't honor resets unless we touch the clock register */ |
|
#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0) |
|
/* Controller has bad caps bits, but really supports DMA */ |
|
#define SDHCI_QUIRK_FORCE_DMA (1<<1) |
|
/* Controller doesn't like to be reset when there is no card inserted. */ |
|
#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2) |
|
/* Controller doesn't like clearing the power reg before a change */ |
|
#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3) |
|
/* Controller has an unusable DMA engine */ |
|
#define SDHCI_QUIRK_BROKEN_DMA (1<<5) |
|
/* Controller has an unusable ADMA engine */ |
|
#define SDHCI_QUIRK_BROKEN_ADMA (1<<6) |
|
/* Controller can only DMA from 32-bit aligned addresses */ |
|
#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7) |
|
/* Controller can only DMA chunk sizes that are a multiple of 32 bits */ |
|
#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8) |
|
/* Controller can only ADMA chunks that are a multiple of 32 bits */ |
|
#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9) |
|
/* Controller needs to be reset after each request to stay stable */ |
|
#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10) |
|
/* Controller needs voltage and power writes to happen separately */ |
|
#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11) |
|
/* Controller provides an incorrect timeout value for transfers */ |
|
#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12) |
|
/* Controller has an issue with buffer bits for small transfers */ |
|
#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13) |
|
/* Controller does not provide transfer-complete interrupt when not busy */ |
|
#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14) |
|
/* Controller has unreliable card detection */ |
|
#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15) |
|
/* Controller reports inverted write-protect state */ |
|
#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16) |
|
/* Controller has unusable command queue engine */ |
|
#define SDHCI_QUIRK_BROKEN_CQE (1<<17) |
|
/* Controller does not like fast PIO transfers */ |
|
#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18) |
|
/* Controller does not have a LED */ |
|
#define SDHCI_QUIRK_NO_LED (1<<19) |
|
/* Controller has to be forced to use block size of 2048 bytes */ |
|
#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20) |
|
/* Controller cannot do multi-block transfers */ |
|
#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21) |
|
/* Controller can only handle 1-bit data transfers */ |
|
#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22) |
|
/* Controller needs 10ms delay between applying power and clock */ |
|
#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23) |
|
/* Controller uses SDCLK instead of TMCLK for data timeouts */ |
|
#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24) |
|
/* Controller reports wrong base clock capability */ |
|
#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25) |
|
/* Controller cannot support End Attribute in NOP ADMA descriptor */ |
|
#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26) |
|
/* Controller is missing device caps. Use caps provided by host */ |
|
#define SDHCI_QUIRK_MISSING_CAPS (1<<27) |
|
/* Controller uses Auto CMD12 command to stop the transfer */ |
|
#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28) |
|
/* Controller doesn't have HISPD bit field in HI-SPEED SD card */ |
|
#define SDHCI_QUIRK_NO_HISPD_BIT (1<<29) |
|
/* Controller treats ADMA descriptors with length 0000h incorrectly */ |
|
#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<30) |
|
/* The read-only detection via SDHCI_PRESENT_STATE register is unstable */ |
|
#define SDHCI_QUIRK_UNSTABLE_RO_DETECT (1<<31) |
|
|
|
unsigned int quirks2; /* More deviations from spec. */ |
|
|
|
#define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0) |
|
#define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1) |
|
/* The system physically doesn't support 1.8v, even if the host does */ |
|
#define SDHCI_QUIRK2_NO_1_8_V (1<<2) |
|
#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3) |
|
#define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON (1<<4) |
|
/* Controller has a non-standard host control register */ |
|
#define SDHCI_QUIRK2_BROKEN_HOST_CONTROL (1<<5) |
|
/* Controller does not support HS200 */ |
|
#define SDHCI_QUIRK2_BROKEN_HS200 (1<<6) |
|
/* Controller does not support DDR50 */ |
|
#define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7) |
|
/* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */ |
|
#define SDHCI_QUIRK2_STOP_WITH_TC (1<<8) |
|
/* Controller does not support 64-bit DMA */ |
|
#define SDHCI_QUIRK2_BROKEN_64_BIT_DMA (1<<9) |
|
/* need clear transfer mode register before send cmd */ |
|
#define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD (1<<10) |
|
/* Capability register bit-63 indicates HS400 support */ |
|
#define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 (1<<11) |
|
/* forced tuned clock */ |
|
#define SDHCI_QUIRK2_TUNING_WORK_AROUND (1<<12) |
|
/* disable the block count for single block transactions */ |
|
#define SDHCI_QUIRK2_SUPPORT_SINGLE (1<<13) |
|
/* Controller broken with using ACMD23 */ |
|
#define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14) |
|
/* Broken Clock divider zero in controller */ |
|
#define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15) |
|
/* Controller has CRC in 136 bit Command Response */ |
|
#define SDHCI_QUIRK2_RSP_136_HAS_CRC (1<<16) |
|
/* |
|
* Disable HW timeout if the requested timeout is more than the maximum |
|
* obtainable timeout. |
|
*/ |
|
#define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT (1<<17) |
|
/* |
|
* 32-bit block count may not support eMMC where upper bits of CMD23 are used |
|
* for other purposes. Consequently we support 16-bit block count by default. |
|
* Otherwise, SDHCI_QUIRK2_USE_32BIT_BLK_CNT can be selected to use 32-bit |
|
* block count. |
|
*/ |
|
#define SDHCI_QUIRK2_USE_32BIT_BLK_CNT (1<<18) |
|
|
|
int irq; /* Device IRQ */ |
|
void __iomem *ioaddr; /* Mapped address */ |
|
phys_addr_t mapbase; /* physical address base */ |
|
char *bounce_buffer; /* For packing SDMA reads/writes */ |
|
dma_addr_t bounce_addr; |
|
unsigned int bounce_buffer_size; |
|
|
|
const struct sdhci_ops *ops; /* Low level hw interface */ |
|
|
|
/* Internal data */ |
|
struct mmc_host *mmc; /* MMC structure */ |
|
struct mmc_host_ops mmc_host_ops; /* MMC host ops */ |
|
u64 dma_mask; /* custom DMA mask */ |
|
|
|
#if IS_ENABLED(CONFIG_LEDS_CLASS) |
|
struct led_classdev led; /* LED control */ |
|
char led_name[32]; |
|
#endif |
|
|
|
spinlock_t lock; /* Mutex */ |
|
|
|
int flags; /* Host attributes */ |
|
#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */ |
|
#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */ |
|
#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */ |
|
#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */ |
|
#define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */ |
|
#define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */ |
|
#define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */ |
|
#define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */ |
|
#define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */ |
|
#define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */ |
|
#define SDHCI_SIGNALING_330 (1<<14) /* Host is capable of 3.3V signaling */ |
|
#define SDHCI_SIGNALING_180 (1<<15) /* Host is capable of 1.8V signaling */ |
|
#define SDHCI_SIGNALING_120 (1<<16) /* Host is capable of 1.2V signaling */ |
|
|
|
unsigned int version; /* SDHCI spec. version */ |
|
|
|
unsigned int max_clk; /* Max possible freq (MHz) */ |
|
unsigned int timeout_clk; /* Timeout freq (KHz) */ |
|
u8 max_timeout_count; /* Vendor specific max timeout count */ |
|
unsigned int clk_mul; /* Clock Muliplier value */ |
|
|
|
unsigned int clock; /* Current clock (MHz) */ |
|
u8 pwr; /* Current voltage */ |
|
u8 drv_type; /* Current UHS-I driver type */ |
|
bool reinit_uhs; /* Force UHS-related re-initialization */ |
|
|
|
bool runtime_suspended; /* Host is runtime suspended */ |
|
bool bus_on; /* Bus power prevents runtime suspend */ |
|
bool preset_enabled; /* Preset is enabled */ |
|
bool pending_reset; /* Cmd/data reset is pending */ |
|
bool irq_wake_enabled; /* IRQ wakeup is enabled */ |
|
bool v4_mode; /* Host Version 4 Enable */ |
|
bool use_external_dma; /* Host selects to use external DMA */ |
|
bool always_defer_done; /* Always defer to complete requests */ |
|
|
|
struct mmc_request *mrqs_done[SDHCI_MAX_MRQS]; /* Requests done */ |
|
struct mmc_command *cmd; /* Current command */ |
|
struct mmc_command *data_cmd; /* Current data command */ |
|
struct mmc_command *deferred_cmd; /* Deferred command */ |
|
struct mmc_data *data; /* Current data request */ |
|
unsigned int data_early:1; /* Data finished before cmd */ |
|
|
|
struct sg_mapping_iter sg_miter; /* SG state for PIO */ |
|
unsigned int blocks; /* remaining PIO blocks */ |
|
|
|
int sg_count; /* Mapped sg entries */ |
|
int max_adma; /* Max. length in ADMA descriptor */ |
|
|
|
void *adma_table; /* ADMA descriptor table */ |
|
void *align_buffer; /* Bounce buffer */ |
|
|
|
size_t adma_table_sz; /* ADMA descriptor table size */ |
|
size_t align_buffer_sz; /* Bounce buffer size */ |
|
|
|
dma_addr_t adma_addr; /* Mapped ADMA descr. table */ |
|
dma_addr_t align_addr; /* Mapped bounce buffer */ |
|
|
|
unsigned int desc_sz; /* ADMA current descriptor size */ |
|
unsigned int alloc_desc_sz; /* ADMA descr. max size host supports */ |
|
|
|
struct workqueue_struct *complete_wq; /* Request completion wq */ |
|
struct work_struct complete_work; /* Request completion work */ |
|
|
|
struct timer_list timer; /* Timer for timeouts */ |
|
struct timer_list data_timer; /* Timer for data timeouts */ |
|
|
|
#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA) |
|
struct dma_chan *rx_chan; |
|
struct dma_chan *tx_chan; |
|
#endif |
|
|
|
u32 caps; /* CAPABILITY_0 */ |
|
u32 caps1; /* CAPABILITY_1 */ |
|
bool read_caps; /* Capability flags have been read */ |
|
|
|
bool sdhci_core_to_disable_vqmmc; /* sdhci core can disable vqmmc */ |
|
unsigned int ocr_avail_sdio; /* OCR bit masks */ |
|
unsigned int ocr_avail_sd; |
|
unsigned int ocr_avail_mmc; |
|
u32 ocr_mask; /* available voltages */ |
|
|
|
unsigned timing; /* Current timing */ |
|
|
|
u32 thread_isr; |
|
|
|
/* cached registers */ |
|
u32 ier; |
|
|
|
bool cqe_on; /* CQE is operating */ |
|
u32 cqe_ier; /* CQE interrupt mask */ |
|
u32 cqe_err_ier; /* CQE error interrupt mask */ |
|
|
|
wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */ |
|
unsigned int tuning_done; /* Condition flag set when CMD19 succeeds */ |
|
|
|
unsigned int tuning_count; /* Timer count for re-tuning */ |
|
unsigned int tuning_mode; /* Re-tuning mode supported by host */ |
|
unsigned int tuning_err; /* Error code for re-tuning */ |
|
#define SDHCI_TUNING_MODE_1 0 |
|
#define SDHCI_TUNING_MODE_2 1 |
|
#define SDHCI_TUNING_MODE_3 2 |
|
/* Delay (ms) between tuning commands */ |
|
int tuning_delay; |
|
int tuning_loop_count; |
|
|
|
/* Host SDMA buffer boundary. */ |
|
u32 sdma_boundary; |
|
|
|
/* Host ADMA table count */ |
|
u32 adma_table_cnt; |
|
|
|
u64 data_timeout; |
|
|
|
unsigned long private[] ____cacheline_aligned; |
|
}; |
|
|
|
struct sdhci_ops { |
|
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS |
|
u32 (*read_l)(struct sdhci_host *host, int reg); |
|
u16 (*read_w)(struct sdhci_host *host, int reg); |
|
u8 (*read_b)(struct sdhci_host *host, int reg); |
|
void (*write_l)(struct sdhci_host *host, u32 val, int reg); |
|
void (*write_w)(struct sdhci_host *host, u16 val, int reg); |
|
void (*write_b)(struct sdhci_host *host, u8 val, int reg); |
|
#endif |
|
|
|
void (*set_clock)(struct sdhci_host *host, unsigned int clock); |
|
void (*set_power)(struct sdhci_host *host, unsigned char mode, |
|
unsigned short vdd); |
|
|
|
u32 (*irq)(struct sdhci_host *host, u32 intmask); |
|
|
|
int (*set_dma_mask)(struct sdhci_host *host); |
|
int (*enable_dma)(struct sdhci_host *host); |
|
unsigned int (*get_max_clock)(struct sdhci_host *host); |
|
unsigned int (*get_min_clock)(struct sdhci_host *host); |
|
/* get_timeout_clock should return clk rate in unit of Hz */ |
|
unsigned int (*get_timeout_clock)(struct sdhci_host *host); |
|
unsigned int (*get_max_timeout_count)(struct sdhci_host *host); |
|
void (*set_timeout)(struct sdhci_host *host, |
|
struct mmc_command *cmd); |
|
void (*set_bus_width)(struct sdhci_host *host, int width); |
|
void (*platform_send_init_74_clocks)(struct sdhci_host *host, |
|
u8 power_mode); |
|
unsigned int (*get_ro)(struct sdhci_host *host); |
|
void (*reset)(struct sdhci_host *host, u8 mask); |
|
int (*platform_execute_tuning)(struct sdhci_host *host, u32 opcode); |
|
void (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs); |
|
void (*hw_reset)(struct sdhci_host *host); |
|
void (*adma_workaround)(struct sdhci_host *host, u32 intmask); |
|
void (*card_event)(struct sdhci_host *host); |
|
void (*voltage_switch)(struct sdhci_host *host); |
|
void (*adma_write_desc)(struct sdhci_host *host, void **desc, |
|
dma_addr_t addr, int len, unsigned int cmd); |
|
void (*copy_to_bounce_buffer)(struct sdhci_host *host, |
|
struct mmc_data *data, |
|
unsigned int length); |
|
void (*request_done)(struct sdhci_host *host, |
|
struct mmc_request *mrq); |
|
void (*dump_vendor_regs)(struct sdhci_host *host); |
|
}; |
|
|
|
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS |
|
|
|
static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg) |
|
{ |
|
if (unlikely(host->ops->write_l)) |
|
host->ops->write_l(host, val, reg); |
|
else |
|
writel(val, host->ioaddr + reg); |
|
} |
|
|
|
static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg) |
|
{ |
|
if (unlikely(host->ops->write_w)) |
|
host->ops->write_w(host, val, reg); |
|
else |
|
writew(val, host->ioaddr + reg); |
|
} |
|
|
|
static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg) |
|
{ |
|
if (unlikely(host->ops->write_b)) |
|
host->ops->write_b(host, val, reg); |
|
else |
|
writeb(val, host->ioaddr + reg); |
|
} |
|
|
|
static inline u32 sdhci_readl(struct sdhci_host *host, int reg) |
|
{ |
|
if (unlikely(host->ops->read_l)) |
|
return host->ops->read_l(host, reg); |
|
else |
|
return readl(host->ioaddr + reg); |
|
} |
|
|
|
static inline u16 sdhci_readw(struct sdhci_host *host, int reg) |
|
{ |
|
if (unlikely(host->ops->read_w)) |
|
return host->ops->read_w(host, reg); |
|
else |
|
return readw(host->ioaddr + reg); |
|
} |
|
|
|
static inline u8 sdhci_readb(struct sdhci_host *host, int reg) |
|
{ |
|
if (unlikely(host->ops->read_b)) |
|
return host->ops->read_b(host, reg); |
|
else |
|
return readb(host->ioaddr + reg); |
|
} |
|
|
|
#else |
|
|
|
static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg) |
|
{ |
|
writel(val, host->ioaddr + reg); |
|
} |
|
|
|
static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg) |
|
{ |
|
writew(val, host->ioaddr + reg); |
|
} |
|
|
|
static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg) |
|
{ |
|
writeb(val, host->ioaddr + reg); |
|
} |
|
|
|
static inline u32 sdhci_readl(struct sdhci_host *host, int reg) |
|
{ |
|
return readl(host->ioaddr + reg); |
|
} |
|
|
|
static inline u16 sdhci_readw(struct sdhci_host *host, int reg) |
|
{ |
|
return readw(host->ioaddr + reg); |
|
} |
|
|
|
static inline u8 sdhci_readb(struct sdhci_host *host, int reg) |
|
{ |
|
return readb(host->ioaddr + reg); |
|
} |
|
|
|
#endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */ |
|
|
|
struct sdhci_host *sdhci_alloc_host(struct device *dev, size_t priv_size); |
|
void sdhci_free_host(struct sdhci_host *host); |
|
|
|
static inline void *sdhci_priv(struct sdhci_host *host) |
|
{ |
|
return host->private; |
|
} |
|
|
|
void __sdhci_read_caps(struct sdhci_host *host, const u16 *ver, |
|
const u32 *caps, const u32 *caps1); |
|
int sdhci_setup_host(struct sdhci_host *host); |
|
void sdhci_cleanup_host(struct sdhci_host *host); |
|
int __sdhci_add_host(struct sdhci_host *host); |
|
int sdhci_add_host(struct sdhci_host *host); |
|
void sdhci_remove_host(struct sdhci_host *host, int dead); |
|
|
|
static inline void sdhci_read_caps(struct sdhci_host *host) |
|
{ |
|
__sdhci_read_caps(host, NULL, NULL, NULL); |
|
} |
|
|
|
u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock, |
|
unsigned int *actual_clock); |
|
void sdhci_set_clock(struct sdhci_host *host, unsigned int clock); |
|
void sdhci_enable_clk(struct sdhci_host *host, u16 clk); |
|
void sdhci_set_power(struct sdhci_host *host, unsigned char mode, |
|
unsigned short vdd); |
|
void sdhci_set_power_and_bus_voltage(struct sdhci_host *host, |
|
unsigned char mode, |
|
unsigned short vdd); |
|
void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode, |
|
unsigned short vdd); |
|
int sdhci_get_cd_nogpio(struct mmc_host *mmc); |
|
void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq); |
|
int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq); |
|
void sdhci_set_bus_width(struct sdhci_host *host, int width); |
|
void sdhci_reset(struct sdhci_host *host, u8 mask); |
|
void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing); |
|
int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode); |
|
void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); |
|
int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, |
|
struct mmc_ios *ios); |
|
void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable); |
|
void sdhci_adma_write_desc(struct sdhci_host *host, void **desc, |
|
dma_addr_t addr, int len, unsigned int cmd); |
|
|
|
#ifdef CONFIG_PM |
|
int sdhci_suspend_host(struct sdhci_host *host); |
|
int sdhci_resume_host(struct sdhci_host *host); |
|
int sdhci_runtime_suspend_host(struct sdhci_host *host); |
|
int sdhci_runtime_resume_host(struct sdhci_host *host, int soft_reset); |
|
#endif |
|
|
|
void sdhci_cqe_enable(struct mmc_host *mmc); |
|
void sdhci_cqe_disable(struct mmc_host *mmc, bool recovery); |
|
bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error, |
|
int *data_error); |
|
|
|
void sdhci_dumpregs(struct sdhci_host *host); |
|
void sdhci_enable_v4_mode(struct sdhci_host *host); |
|
|
|
void sdhci_start_tuning(struct sdhci_host *host); |
|
void sdhci_end_tuning(struct sdhci_host *host); |
|
void sdhci_reset_tuning(struct sdhci_host *host); |
|
void sdhci_send_tuning(struct sdhci_host *host, u32 opcode); |
|
void sdhci_abort_tuning(struct sdhci_host *host, u32 opcode); |
|
void sdhci_switch_external_dma(struct sdhci_host *host, bool en); |
|
void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable); |
|
void __sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd); |
|
|
|
#endif /* __SDHCI_HW_H */
|
|
|