mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
45 lines
1.6 KiB
45 lines
1.6 KiB
* Freescale MXS LRADC device driver |
|
|
|
Required properties: |
|
- compatible: Should be "fsl,imx23-lradc" for i.MX23 SoC and "fsl,imx28-lradc" |
|
for i.MX28 SoC |
|
- reg: Address and length of the register set for the device |
|
- interrupts: Should contain the LRADC interrupts |
|
|
|
Optional properties: |
|
- fsl,lradc-touchscreen-wires: Number of wires used to connect the touchscreen |
|
to LRADC. Valid value is either 4 or 5. If this |
|
property is not present, then the touchscreen is |
|
disabled. 5 wires is valid for i.MX28 SoC only. |
|
- fsl,ave-ctrl: number of samples per direction to calculate an average value. |
|
Allowed value is 1 ... 32, default is 4 |
|
- fsl,ave-delay: delay between consecutive samples. Allowed value is |
|
2 ... 2048. It is used if 'fsl,ave-ctrl' > 1, counts at |
|
2 kHz and its default is 2 (= 1 ms) |
|
- fsl,settling: delay between plate switch to next sample. Allowed value is |
|
1 ... 2047. It counts at 2 kHz and its default is |
|
10 (= 5 ms) |
|
|
|
Example for i.MX23 SoC: |
|
|
|
lradc@80050000 { |
|
compatible = "fsl,imx23-lradc"; |
|
reg = <0x80050000 0x2000>; |
|
interrupts = <36 37 38 39 40 41 42 43 44>; |
|
fsl,lradc-touchscreen-wires = <4>; |
|
fsl,ave-ctrl = <4>; |
|
fsl,ave-delay = <2>; |
|
fsl,settling = <10>; |
|
}; |
|
|
|
Example for i.MX28 SoC: |
|
|
|
lradc@80050000 { |
|
compatible = "fsl,imx28-lradc"; |
|
reg = <0x80050000 0x2000>; |
|
interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>; |
|
fsl,lradc-touchscreen-wires = <5>; |
|
fsl,ave-ctrl = <4>; |
|
fsl,ave-delay = <2>; |
|
fsl,settling = <10>; |
|
};
|
|
|