mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
47 lines
1.3 KiB
47 lines
1.3 KiB
GMT G762/G763 PWM Fan controller |
|
|
|
Required node properties: |
|
|
|
- "compatible": must be either "gmt,g762" or "gmt,g763" |
|
- "reg": I2C bus address of the device |
|
- "clocks": a fixed clock providing input clock frequency |
|
on CLK pin of the chip. |
|
|
|
Optional properties: |
|
|
|
- "fan_startv": fan startup voltage. Accepted values are 0, 1, 2 and 3. |
|
The higher the more. |
|
|
|
- "pwm_polarity": pwm polarity. Accepted values are 0 (positive duty) |
|
and 1 (negative duty). |
|
|
|
- "fan_gear_mode": fan gear mode. Supported values are 0, 1 and 2. |
|
|
|
If an optional property is not set in .dts file, then current value is kept |
|
unmodified (e.g. u-boot installed value). |
|
|
|
Additional information on operational parameters for the device is available |
|
in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available |
|
at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf. |
|
|
|
Example g762 node: |
|
|
|
clocks { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
g762_clk: fixedclk { |
|
compatible = "fixed-clock"; |
|
#clock-cells = <0>; |
|
clock-frequency = <8192>; |
|
} |
|
} |
|
|
|
g762: g762@3e { |
|
compatible = "gmt,g762"; |
|
reg = <0x3e>; |
|
clocks = <&g762_clk> |
|
fan_gear_mode = <0>; /* chip default */ |
|
fan_startv = <1>; /* chip default */ |
|
pwm_polarity = <0>; /* chip default */ |
|
};
|
|
|