# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/media/i2c/arducam,64mp.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Arducam 1/1.7-Inch 64Mpixel CMOS Digital Image Sensor maintainers: - Lee Jackson description: |- The Arducam 1/1.7-Inch 64Mpixel CMOS active pixel digital image sensor with an active array size of 9248 x 6944. It is programmable through I2C interface. The I2C address is fixed to 0x1A as per sensor data sheet. Image data is sent through MIPI CSI-2, which can be configured for operation with either 2 or 4 data lanes. properties: compatible: const: arducam,64mp reg: description: I2C device address maxItems: 1 clocks: maxItems: 1 VDIG-supply: description: Digital I/O voltage supply, 1.05 volts VANA-supply: description: Analog voltage supply, 2.8 volts VDDL-supply: description: Digital core voltage supply, 1.8 volts reset-gpios: description: |- Reference to the GPIO connected to the xclr pin, if any. Must be released (set high) after all supplies and INCK are applied. # See ../video-interfaces.txt for more details port: type: object properties: endpoint: type: object properties: data-lanes: description: |- The sensor supports either two-lane, or four-lane operation. For two-lane operation the property must be set to <1 2>. anyOf: - items: - const: 1 - const: 2 - items: - const: 1 - const: 2 - const: 3 - const: 4 clock-noncontinuous: true link-frequencies: allOf: - $ref: /schemas/types.yaml#/definitions/uint64-array description: Allowed data bus frequencies. required: - link-frequencies required: - compatible - reg - clocks - VANA-supply - VDIG-supply - VDDL-supply - port additionalProperties: false examples: - | i2c0 { #address-cells = <1>; #size-cells = <0>; arducam_64mp: sensor@1a { compatible = "arducam,64mp"; reg = <0x1a>; clocks = <&arducam_64mp_clk>; VANA-supply = <&arducam_64mp_vana>; /* 2.8v */ VDIG-supply = <&arducam_64mp_vdig>; /* 1.05v */ VDDL-supply = <&arducam_64mp_vddl>; /* 1.8v */ port { arducam_64mp_0: endpoint { remote-endpoint = <&csi1_ep>; data-lanes = <1 2>; clock-noncontinuous; link-frequencies = /bits/ 64 <456000000>; }; }; }; }; ...