Tidied up duplicated cross-chain API code that
fetched Qortal AT info.
Added Bitcoin-related cross-chain API calls
for building, checking, refunding and redeeming
P2SH.
Added new Bitcoin-related API error codes.
Controller now starts up, and shuts down, bitcoinj.
Speed-up in BTC class so bitcoinj doesn't have
to throw away all peers and rediscover & reconnect
to them with every chain-related call.
Added API calls to aid Qortal-side of cross-chain trading.
POST /crosschain/build - for building Qortal AT
POST /crosschain/tradeoffer/recipient - for sending trade partner/recipient to AT
POST /crosschain/tradeoffer/secret - for sending secret to AT
DELETE /crosschain/tradeoffer - for cancelling AT
More fixes regarding Blocks processing/orphaning ATs.
More fixes regarding sending/receiving blocks containing AT data.
AT-related fix to genesis block.
Improved cross-chain trading AT code, removing offer-mode timeout
and replacing that with allowing AT creator to cancel offer/end AT
by sending AT the creator's own address as trade partner/recipient.
After all, they're not going to trade with themselves.
Added assertion to check BTCACCT.CODE_BYTES_HASH matches compiled code hash.
Added cross-chain AT's 'mode' for easier diagnosis, either OFFER or TRADE.
We can't use AT's signature to generate AT address because address is needed
before DEPLOY_AT transaction is signed. So we use a hash of signature-less
transaction bytes.
Corresponding changes to tests.
Reworked the cross-chain trading AT so it is now 2-stage:
stage 1: 'offer' mode
waiting for message from creator containing trade partner's address
stage 2: 'trade' mode
waiting for message from trade partner containing secret
Adjusted unit tests to cover above.
Changed QortalATAPI.putCreatorAddressIntoB from storing
creator's public key to actually storing creator's address.
Refactored BTCACCT.AtConstants to CrossChainTradeData.
Now we also store hash of AT's code bytes in DB so we can look up
ATs by what they do. Affects ATData class, ATRepository, etc.
Added "Automated Transactions" and "Cross-Chain" API sections.
New API call GET /at/byfunction/{codehash} for looking up ATs
by what they do, based on hash of their code bytes.
New API call GET /at/{ataddress} for fetching info for specific AT.
New API call GET /at/{ataddress}/data for fetch an AT's data segment.
Mostly for diagnosis of AT's current state.
New API call POST /at for building a raw, unsigned DEPLOY_AT transaction.
New API call GET /crosschain/tradeoffers for finding open BTC-QORT trading ATs.
We require AT v1.3.4 now!
Updated AT-related logging.
Added "isInitial" flag to AT state data so that state data created at
deployment is not added to serialized block data.
Updated BTC-QORT AT code and tests to cover various scenarios.
Added missing 'testNtpOffset' to various test versions of 'settings.json'.
Added missing 'ciyamAtSettings' to various test blockchain configs.
Loads of AT-related additions/fixes/etc. to core code, e.g Block
Requires fix in CIYAM AT v1.3.2
New version of Qortal cross-trade AT code.
Change how Qortal addresses are managed in QortalATAPI from using
base58 strings (that are too long) to using hex form (25 bytes)
as they need to fix into 32 byte A/B register.
Generate AT addresses using DeployAtTransaction's signature instead
of convoluted hash of AT data like name, description, etc.
Add startTime as arg to GetTransaction test app.
Add missing fields (name, description, ATType, tags) to DeployAT test app.
Bump CIYAM AT requirement to v1.3
Remove multi-blockchain AT aspect for now (BlockchainAPI).
For PUT_PREVIOUS_BLOCK_HASH_INTO_A we no longer use SHA256 to condense 64-byte block signature into 32 bytes.
Now we put block height into A1 and SHA192 of signature into A2 through A4.
This allows possible future lookup of block data using "block hash", with verification that it is the same block.
Some AT functions use "address in B" but sometimes we populate B with account's public key instead.
So the method "getAccountFromB" is smart and checks for an actual, textual address in B starting with 'Q', otherwise assumes B contains public key.
The Settings field "useBitcoinTestNet" (boolean) now replaced with "bitcoinNet" (String) with possible values MAIN (default), TEST3, REGTEST.
This allows for more varied development/testing scenarios.
Use correct Bitcoin nSequence value 0xFFFFFFFE for P2SH, i.e. enable locktime, disable RBF.
Roll REGTEST checkpoints file generator into main BTC class.
Yet another rewrite of Bitcoin P2SH scripts for BTC-QORT cross-chain trading.
Added associated test classes BuildP2SH, CheckP2SH, DeployAT (unfinished).
Streamlined BTC class and switched to memory block store.
Split BTCACCTTests into BTCACCT utility class and (so far)
three stand-alone apps: Initiate1, Refund2 and Respond2
Moved some Qortal-specific CIYAM AT constants into blockchain config.
Removed redundant BTCTests
Bump bitcoinj to 0.15.5 for fixes.
lockTime is int (seconds since epoch), not long (ms since epoch).
Improve output of Initiate1.
Added (most of) Respond2.
If the timestamp-pubkey-sig is still 'current' then it'll be in
Controller's list of current online accounts, so we can quickly scan
that list before falling back to the more expensive Ed25519 verify.
Added equals() and hashCode() to OnlineAccountData to support above.
When synchronizing is forced via API call, the SysTray doesn't update
to reflect this.
We fix this by moving the SysTray updating code from
Controller.potentiallySynchronize() to the inner method
Controller.actuallySynchronize(), which is also the method called
directly by the API.
Previously BlockMinter & Synchronizer would both try opportunistic
locking, with no wait/timeout or fairness.
This could lead to a situation where a majority of nodes are
synchronizing, albeit only the top 1 or 2 blocks, but no node
manages to mint within the 'recent' period, so the chain stalls.
However, if a node is at/near the top of the chain then synchronization
shouldn't take very long so we let BlockMinter wait until to 30s
(approx. half typical block time) to obtain lock.
This makes minting blocks more likely in a BlockMinter/Sync fight
which helps keep the chain going.
Detecting chain stalls, and allowing minting if we have plenty of peers,
also produces blockchain 'islands' so isn't a simple fix at this point.
Bumped TCP timeouts for fetching auto-update from 5s (connect) and
3s (read) to 30s (connect) and 10s (read) to allow for nodes with
slower internet connections.
Increased interval between checking for auto-updates from 5 minutes
to 20 minutes to reduce load on update sources and also to reduce
the number of nodes that restart at any one time.
Obviously this new checking interval will only apply after the NEXT
auto-update...
Used when checking that node has shutdown and when replacing old JAR with new update.
ApplyUpdate previously waited 5 seconds between checks/retries, for up to 5 times: 25 seconds.
Now waits 10 seconds, for up to 12 times: 120 seconds.
Hopefully this will give slower nodes enough time to shut down and prevent errors like these on Windows installs:
2020-03-24 12:05:50 INFO ApplyUpdate:114 - Unable to replace JAR: qortal.jar: The process cannot access the file because it is being used by another process.
Added a setting "showBackupNotification", which is false by default,
that shows a tray notification when a repository backup occurs.
Above notification, and the auto-update notification, now refer to
the SysTray i18n translation lookup resources.
Typical users don't need quite so many connections, so minOutboundPeers and
maxPeers reduced accordingly.
maxNetworkThreadPoolSize increased from 10 to 20.
5s is way too long, and even 2s might still be considered excessive.
However, reducing the timeout might also reduce the number of
network engine "spawn failures" due to too many threads tied up
waiting for ping responses from overloaded peers.
Does not affect peer handshaking: that has a separate timeout.
Added Ed25519 private key to public key function accessible from SQL.
Added Ed25519 public key to Qortal address function accessible from SQL.
Used above functions to store minting account public key in SQL to
reduce the number of unnecessarily repeated Ed25519 conversions.
Used above functions to store reward-share minting's accounts address
to reduce the number of unneccessarily repeated PK-to-address conversions.
Reduced the usage of PublicKeyAccount to simply Account where possible,
to reduce the number of Ed25519 conversions.
Account.canMint(), Account.canRewardShare() and Account.getEffectiveMintingLevel()
now only perform 1 repository fetch instead of potentially 2 or more.
Cleaned up NTP main thread to reduce CPU load.
A fixed offset can be applied to NTP.getTime() responses, for both
scenarios when NTP is running or not. Useful for testing or simulating
distant remote peers.
Controller.onNetworkMessage() and Network.onMessage() have both had their
complexity simplified by extracting per-case code to separate methods.
Network's EPC engine's thread pool size no longer hard-coded, but comes
from Settings.maxNetworkThreadPoolSize, which is still 10 by default,
but can be increased for high-availability nodes.
Network's EPC task-producing code streamlined to reduce CPU load.
Generally reduced calls to System.currentTimeMillis(), especially
where the value would only be used in verbose logging situations,
and especially in high-call-volume methods, like within repository.
Keep track of when EPC engine can't spawn a new thread as this
might indicate thread-pool exhaustion and cause some network
messages to be lost.
If logging level is NOT 'trace' (or 'all') then don't call
System.currentTimeMillis() as we'll never use the value.
Similarly, don't set thread names if not logging at 'trace' either.
Update EPC tests, particularly unified per-second/end-of-test stats
reporting.
catbref